V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config option

Some cards need the diseqc signal modulated, while some just need
the envelope to control the LNB supply.

This fixes Bug 9887
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Acked-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/dvb-usb/ttusb2.c

@@ -144,6 +144,7 @@ static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
 static struct tda10086_config tda10086_config = {
 	.demod_address = 0x0e,
 	.invert = 0,
+	.diseqc_tone = 1,
 };
 
 static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)

drivers/media/dvb/frontends/tda10086.c

@@ -106,9 +106,12 @@ static int tda10086_write_mask(struct tda10086_state *state, int reg, int mask,
 static int tda10086_init(struct dvb_frontend* fe)
 {
 	struct tda10086_state* state = fe->demodulator_priv;
+	u8 t22k_off = 0x80;
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	if (state->config->diseqc_tone)
+		t22k_off = 0;
 	// reset
 	tda10086_write_byte(state, 0x00, 0x00);
 	msleep(10);
@@ -158,7 +161,7 @@ static int tda10086_init(struct dvb_frontend* fe)
 	tda10086_write_byte(state, 0x3d, 0x80);
 
 	// setup SEC
-	tda10086_write_byte(state, 0x36, 0x80); // all SEC off, no 22k tone
+	tda10086_write_byte(state, 0x36, t22k_off); // all SEC off, 22k tone
 	tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000)));      // } tone frequency
 	tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // }
 
@@ -180,16 +183,20 @@ static void tda10086_diseqc_wait(struct tda10086_state *state)
 static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
 	struct tda10086_state* state = fe->demodulator_priv;
+	u8 t22k_off = 0x80;
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	if (state->config->diseqc_tone)
+		t22k_off = 0;
+
 	switch (tone) {
 	case SEC_TONE_OFF:
-		tda10086_write_byte(state, 0x36, 0x80);
+		tda10086_write_byte(state, 0x36, t22k_off);
 		break;
 
 	case SEC_TONE_ON:
-		tda10086_write_byte(state, 0x36, 0x81);
+		tda10086_write_byte(state, 0x36, 0x01 + t22k_off);
 		break;
 	}
 
@@ -202,9 +209,13 @@ static int tda10086_send_master_cmd (struct dvb_frontend* fe,
 	struct tda10086_state* state = fe->demodulator_priv;
 	int i;
 	u8 oldval;
+	u8 t22k_off = 0x80;
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	if (state->config->diseqc_tone)
+		t22k_off = 0;
+
 	if (cmd->msg_len > 6)
 		return -EINVAL;
 	oldval = tda10086_read_byte(state, 0x36);
@@ -212,7 +223,8 @@ static int tda10086_send_master_cmd (struct dvb_frontend* fe,
 	for(i=0; i< cmd->msg_len; i++) {
 		tda10086_write_byte(state, 0x48+i, cmd->msg[i]);
 	}
-	tda10086_write_byte(state, 0x36, 0x88 | ((cmd->msg_len - 1) << 4));
+	tda10086_write_byte(state, 0x36, (0x08 + t22k_off)
+					| ((cmd->msg_len - 1) << 4));
 
 	tda10086_diseqc_wait(state);
 
@@ -225,16 +237,20 @@ static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minic
 {
 	struct tda10086_state* state = fe->demodulator_priv;
 	u8 oldval = tda10086_read_byte(state, 0x36);
+	u8 t22k_off = 0x80;
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	if (state->config->diseqc_tone)
+		t22k_off = 0;
+
 	switch(minicmd) {
 	case SEC_MINI_A:
-		tda10086_write_byte(state, 0x36, 0x84);
+		tda10086_write_byte(state, 0x36, 0x04 + t22k_off);
 		break;
 
 	case SEC_MINI_B:
-		tda10086_write_byte(state, 0x36, 0x86);
+		tda10086_write_byte(state, 0x36, 0x06 + t22k_off);
 		break;
 	}
 

drivers/media/dvb/frontends/tda10086.h

@@ -33,6 +33,9 @@ struct tda10086_config
 
 	/* does the "inversion" need inverted? */
 	u8 invert;
+
+	/* do we need the diseqc signal with carrier? */
+	u8 diseqc_tone;
 };
 
 #if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))

drivers/media/dvb/ttpci/budget.c

@@ -351,6 +351,7 @@ static struct s5h1420_config s5h1420_config = {
 static struct tda10086_config tda10086_config = {
 	.demod_address = 0x0e,
 	.invert = 0,
+	.diseqc_tone = 1,
 };
 
 static u8 read_pwm(struct budget* budget)

drivers/media/video/saa7134/saa7134-dvb.c

@@ -841,6 +841,7 @@ static struct tda1004x_config ads_tech_duo_config = {
 static struct tda10086_config flydvbs = {
 	.demod_address = 0x0e,
 	.invert = 0,
+	.diseqc_tone = 0,
 };
 
 /* ==================================================================
@@ -955,9 +956,9 @@ static int dvb_init(struct saa7134_dev *dev)
 		configure_tda827x_fe(dev, &tda827x_lifeview_config);
 		break;
 	case SAA7134_BOARD_FLYDVB_TRIO:
-		if(! use_frontend) {	//terrestrial
+		if(! use_frontend) {	/* terrestrial */
 			configure_tda827x_fe(dev, &lifeview_trio_config);
-		} else {  	      //satellite
+		} else {  	        /* satellite */
 			dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
 			if (dev->dvb.frontend) {
 				if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,