Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 ea2fdf84 编写于 作者: B Bartlomiej Zolnierkiewicz 提交者： Felipe Balbi
浏览文件
操作

usb: phy: samsung: remove old common USB PHY code 

drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by
drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung
USB PHY code is no longer used.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NVivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 1c3c0528
隐藏空白更改
内联 并排
Showing with 0 addition and 585 deletion
drivers/usb/phy/phy-samsung-usb.c 已删除 100644 → 0
浏览文件 @ 1c3c0528
/* linux/drivers/usb/phy/phy-samsung-usb.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Praveen Paneri <p.paneri@samsung.com>
*
* Samsung USB-PHY helper driver with common function calls;
* interacts with Samsung USB 2.0 PHY controller driver and later
* with Samsung USB 3.0 PHY driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/samsung_usb_phy.h>
#include "phy-samsung-usb.h"
int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
struct device_node *usbphy_sys;
/* Getting node for system controller interface for usb-phy */
usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
if (!usbphy_sys) {
dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
return -ENODEV;
}
sphy->pmuregs = of_iomap(usbphy_sys, 0);
if (sphy->pmuregs == NULL) {
dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
goto err0;
}
sphy->sysreg = of_iomap(usbphy_sys, 1);
/*
* Not returning error code here, since this situation is not fatal.
* Few SoCs may not have this switch available
*/
if (sphy->sysreg == NULL)
dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
of_node_put(usbphy_sys);
return 0;
err0:
of_node_put(usbphy_sys);
return -ENXIO;
}
EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
/*
* Set isolation here for phy.
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
u32 en_mask = 0;
if (!sphy->pmuregs) {
dev_warn(sphy->dev, "Can't set pmu isolation\n");
return;
}
if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
en_mask = sphy->drv_data->devphy_en_mask;
} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
en_mask = sphy->drv_data->hostphy_en_mask;
}
reg_val = readl(reg);
if (on)
reg_val &= ~en_mask;
else
reg_val |= en_mask;
writel(reg_val, reg);
if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
}
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
*/
void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
{
u32 reg;
if (!sphy->sysreg) {
dev_warn(sphy->dev, "Can't configure specified phy mode\n");
return;
}
reg = readl(sphy->sysreg);
if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
else if (sphy->phy_type == USB_PHY_TYPE_HOST)
reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
writel(reg, sphy->sysreg);
}
EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel);
/*
* PHYs are different for USB Device and USB Host.
* This make sure that correct PHY type is selected before
* any operation on PHY.
*/
int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type)
{
struct samsung_usbphy *sphy = phy_to_sphy(phy);
sphy->phy_type = phy_type;
return 0;
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
unsigned long rate)
{
unsigned int clksel;
switch (rate) {
case 12 * MHZ:
clksel = PHYCLK_CLKSEL_12M;
break;
case 24 * MHZ:
clksel = PHYCLK_CLKSEL_24M;
break;
case 48 * MHZ:
clksel = PHYCLK_CLKSEL_48M;
break;
default:
dev_err(sphy->dev,
"Invalid reference clock frequency: %lu\n", rate);
return -EINVAL;
}
return clksel;
}
EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx);
int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
unsigned long rate)
{
unsigned int clksel;
switch (rate) {
case 9600 * KHZ:
clksel = FSEL_CLKSEL_9600K;
break;
case 10 * MHZ:
clksel = FSEL_CLKSEL_10M;
break;
case 12 * MHZ:
clksel = FSEL_CLKSEL_12M;
break;
case 19200 * KHZ:
clksel = FSEL_CLKSEL_19200K;
break;
case 20 * MHZ:
clksel = FSEL_CLKSEL_20M;
break;
case 24 * MHZ:
clksel = FSEL_CLKSEL_24M;
break;
case 50 * MHZ:
clksel = FSEL_CLKSEL_50M;
break;
default:
dev_err(sphy->dev,
"Invalid reference clock frequency: %lu\n", rate);
return -EINVAL;
}
return clksel;
}
EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12);
/*
* Returns reference clock frequency selection value
*/
int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
unsigned long rate;
int refclk_freq;
/*
* In exynos5250 USB host and device PHY use
* external crystal clock XXTI
*/
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
ref_clk = clk_get(sphy->dev, "ext_xtal");
else
ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
rate = clk_get_rate(ref_clk);
refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate);
clk_put(ref_clk);
return refclk_freq;
}
EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq);
drivers/usb/phy/phy-samsung-usb.h 已删除 100644 → 0
浏览文件 @ 1c3c0528
/* linux/drivers/usb/phy/phy-samsung-usb.h
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
* OHCI-EXYNOS controllers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/usb/phy.h>
/* Register definitions */
#define SAMSUNG_PHYPWR (0x00)
#define PHYPWR_NORMAL_MASK (0x19 << 0)
#define PHYPWR_OTG_DISABLE (0x1 << 4)
#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
/* For Exynos4 */
#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
#define SAMSUNG_PHYCLK (0x04)
#define PHYCLK_MODE_USB11 (0x1 << 6)
#define PHYCLK_EXT_OSC (0x1 << 5)
#define PHYCLK_COMMON_ON_N (0x1 << 4)
#define PHYCLK_ID_PULL (0x1 << 2)
#define PHYCLK_CLKSEL_MASK (0x3 << 0)
#define PHYCLK_CLKSEL_48M (0x0 << 0)
#define PHYCLK_CLKSEL_12M (0x2 << 0)
#define PHYCLK_CLKSEL_24M (0x3 << 0)
#define SAMSUNG_RSTCON (0x08)
#define RSTCON_PHYLINK_SWRST (0x1 << 2)
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
/* EXYNOS4X12 */
#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04)
#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08)
#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
#define RSTCON_HOSTPHY_SWRST (0xf << 3)
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
#define FSEL_CLKSEL_50M (0x7)
#define FSEL_CLKSEL_24M (0x5)
#define FSEL_CLKSEL_20M (0x4)
#define FSEL_CLKSEL_19200K (0x3)
#define FSEL_CLKSEL_12M (0x2)
#define FSEL_CLKSEL_10M (0x1)
#define FSEL_CLKSEL_9600K (0x0)
#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
#define HOST_CTRL0_RETENABLE (0x1 << 10)
#define HOST_CTRL0_COMMONON_N (0x1 << 9)
#define HOST_CTRL0_SIDDQ (0x1 << 6)
#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
#define HOST_CTRL0_UTMISWRST (0x1 << 2)
#define HOST_CTRL0_LINKSWRST (0x1 << 1)
#define HOST_CTRL0_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
#define HSIC_CTRL_SIDDQ (0x1 << 6)
#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
#define HSIC_CTRL_UTMISWRST (0x1 << 2)
#define HSIC_CTRL_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
#define EXYNOS5_PHY_OTG_SYS (0x38)
#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
#define OTG_SYS_PHY0_SWRST (0x1 << 12)
#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
#define OTG_SYS_COMMON_ON (0x1 << 7)
#define OTG_SYS_FSEL_MASK (0x7 << 4)
#define OTG_SYS_FSEL(_x) ((_x) << 4)
#define OTG_SYS_FORCESLEEP (0x1 << 3)
#define OTG_SYS_OTGDISABLE (0x1 << 2)
#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
#define OTG_SYS_FORCESUSPEND (0x1 << 0)
#define EXYNOS5_PHY_OTG_TUNE (0x40)
/* EXYNOS5: USB 3.0 DRD */
#define EXYNOS5_DRD_LINKSYSTEM (0x04)
#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
#define EXYNOS5_DRD_PHYUTMI (0x08)
#define PHYUTMI_OTGDISABLE (0x1 << 6)
#define PHYUTMI_FORCESUSPEND (0x1 << 1)
#define PHYUTMI_FORCESLEEP (0x1 << 0)
#define EXYNOS5_DRD_PHYPIPE (0x0c)
#define EXYNOS5_DRD_PHYCLKRST (0x10)
#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
#define PHYCLKRST_SSC_EN (0x1 << 20)
#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
#define PHYCLKRST_FSEL_MASK (0x3f << 5)
#define PHYCLKRST_FSEL(_x) ((_x) << 5)
#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
#define PHYCLKRST_RETENABLEN (0x1 << 4)
#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
#define PHYCLKRST_PORTRESET (0x1 << 1)
#define PHYCLKRST_COMMONONN (0x1 << 0)
#define EXYNOS5_DRD_PHYREG0 (0x14)
#define EXYNOS5_DRD_PHYREG1 (0x18)
#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
#define EXYNOS5_DRD_PHYPARAM1 (0x20)
#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
#define EXYNOS5_DRD_PHYTERM (0x24)
#define EXYNOS5_DRD_PHYTEST (0x28)
#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
#define EXYNOS5_DRD_PHYADP (0x2c)
#define EXYNOS5_DRD_PHYBATCHG (0x30)
#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
#define EXYNOS5_DRD_PHYRESUME (0x34)
#define EXYNOS5_DRD_LINKPORT (0x44)
#ifndef MHZ
#define MHZ (1000*1000)
#endif
#ifndef KHZ
#define KHZ (1000)
#endif
#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
TYPE_EXYNOS4X12,
TYPE_EXYNOS5250,
};
struct samsung_usbphy;
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
* @devphy_en_mask: device phy enable mask for PHY CONTROL register
* @hostphy_en_mask: host phy enable mask for PHY CONTROL register
* @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
* mapped address of system controller.
* @hostphy_reg_offset: offset to HOST PHY CONTROL register from
* mapped address of system controller.
*
* Here we have a separate mask for device type phy.
* Having different masks for host and device type phy helps
* in setting independent masks in case of SoCs like S5PV210,
* in which PHY0 and PHY1 enable bits belong to same register
* placed at position 0 and 1 respectively.
* Although for newer SoCs like exynos these bits belong to
* different registers altogether placed at position 0.
*/
struct samsung_usbphy_drvdata {
int cpu_type;
int devphy_en_mask;
int hostphy_en_mask;
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
void (*set_isolation)(struct samsung_usbphy *, bool);
void (*phy_enable)(struct samsung_usbphy *);
void (*phy_disable)(struct samsung_usbphy *);
};
/*
* struct samsung_usbphy - transceiver driver state
* @phy: transceiver structure
* @plat: platform data
* @dev: The parent device supplied to the probe function
* @clk: usb phy clock
* @regs: usb phy controller registers memory base
* @pmuregs: USB device PHY_CONTROL register memory base
* @sysreg: USB2.0 PHY_CFG register memory base
* @ref_clk_freq: reference clock frequency selection
* @drv_data: driver data available for different SoCs
* @phy_type: Samsung SoCs specific phy types: #HOST
* #DEVICE
* @phy_usage: usage count for phy
* @lock: lock for phy operations
*/
struct samsung_usbphy {
struct usb_phy phy;
struct samsung_usbphy_data *plat;
struct device *dev;
struct clk *clk;
void __iomem *regs;
void __iomem *pmuregs;
void __iomem *sysreg;
int ref_clk_freq;
const struct samsung_usbphy_drvdata *drv_data;
enum samsung_usb_phy_type phy_type;
atomic_t phy_usage;
spinlock_t lock;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
static const struct of_device_id samsung_usbphy_dt_match[];
static inline const struct samsung_usbphy_drvdata
*samsung_usbphy_get_driver_data(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(samsung_usbphy_dt_match,
pdev->dev.of_node);
return match->data;
}
return (struct samsung_usbphy_drvdata *)
platform_get_device_id(pdev)->driver_data;
}
extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
bool on);
extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
extern int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type);
extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
unsigned long rate);
extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
unsigned long rate);
include/linux/platform_data/samsung-usbphy.h 已删除 100644 → 0
浏览文件 @ 1c3c0528
/*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* http://www.samsung.com/
* Author: Praveen Paneri <p.paneri@samsung.com>
*
* Defines platform data for samsung usb phy driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __SAMSUNG_USBPHY_PLATFORM_H
#define __SAMSUNG_USBPHY_PLATFORM_H
/**
* samsung_usbphy_data - Platform data for USB PHY driver.
* @pmu_isolation: Function to control usb phy isolation in PMU.
*/
struct samsung_usbphy_data {
void (*pmu_isolation)(int on);
};
extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或