Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 ea175ee2 编写于 作者: I Ivo van Doorn 提交者： John W. Linville
浏览文件
操作

rt2x00: Remove rt2x00lib_toggle_rx 

As part of the queue refactoring, the rt2x00lib_toggle_rx
can be removed and replaced with the call directly to
the set_device_state callback function.

We can remove the STATE_RADIO_RX_ON_LINK and
STATE_RADIO_RX_OFF_LINK, as it was only used for
special behavior inside rt2x00lib rather then the
drivers.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 8be4eed0
隐藏空白更改
内联 并排
Showing with 17 addition and 54 deletion
drivers/net/wireless/rt2x00/rt2400pci.c
浏览文件 @ ea175ee2
......@@ -885,8 +885,7 @@ static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
(state == STATE_RADIO_RX_OFF) ||
(state == STATE_RADIO_RX_OFF_LINK));
(state == STATE_RADIO_RX_OFF));
rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
}
......@@ -989,9 +988,7 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2400pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt2400pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt2500pci.c
浏览文件 @ ea175ee2
......@@ -1040,8 +1040,7 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
(state == STATE_RADIO_RX_OFF) ||
(state == STATE_RADIO_RX_OFF_LINK));
(state == STATE_RADIO_RX_OFF));
rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
}
......@@ -1144,9 +1143,7 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt2500pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt2500usb.c
浏览文件 @ ea175ee2
......@@ -938,8 +938,7 @@ static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
(state == STATE_RADIO_RX_OFF) ||
(state == STATE_RADIO_RX_OFF_LINK));
(state == STATE_RADIO_RX_OFF));
rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
}
......@@ -1019,9 +1018,7 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt2500usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt2800pci.c
浏览文件 @ ea175ee2
......@@ -328,8 +328,7 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
(state == STATE_RADIO_RX_ON) ||
(state == STATE_RADIO_RX_ON_LINK));
(state == STATE_RADIO_RX_ON));
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
}
......@@ -477,9 +476,7 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt2800pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt2800usb.c
浏览文件 @ ea175ee2
......@@ -114,8 +114,7 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
(state == STATE_RADIO_RX_ON) ||
(state == STATE_RADIO_RX_ON_LINK));
(state == STATE_RADIO_RX_ON));
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
}
......@@ -216,9 +215,7 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt2800usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt2x00config.c
浏览文件 @ ea175ee2
......@@ -146,7 +146,8 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_RX_OFF);
/*
* Write new antenna setup to device and reset the link tuner.
......@@ -160,7 +161,8 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_RX_ON);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
......
drivers/net/wireless/rt2x00/rt2x00dev.c
浏览文件 @ ea175ee2
......@@ -68,7 +68,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Enable RX.
*/
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_ON);
rt2x00link_start_tuner(rt2x00dev);
/*
* Start watchdog monitoring.
......@@ -102,7 +103,8 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Disable RX.
*/
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
rt2x00link_stop_tuner(rt2x00dev);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_OFF);
/*
* Disable radio.
......@@ -113,23 +115,6 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00leds_led_radio(rt2x00dev, false);
}
void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
{
/*
* When we are disabling the RX, we should also stop the link tuner.
*/
if (state == STATE_RADIO_RX_OFF)
rt2x00link_stop_tuner(rt2x00dev);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
/*
* When we are enabling the RX, we should also start the link tuner.
*/
if (state == STATE_RADIO_RX_ON)
rt2x00link_start_tuner(rt2x00dev);
}
static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
......
drivers/net/wireless/rt2x00/rt2x00lib.h
浏览文件 @ ea175ee2
......@@ -69,7 +69,6 @@ static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
*/
int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state);
/*
* Initialization handlers.
......
drivers/net/wireless/rt2x00/rt2x00mac.c
浏览文件 @ ea175ee2
......@@ -352,7 +352,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
* if for any reason the link tuner must be reset, this will be
* handled by rt2x00lib_config().
*/
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_OFF);
/*
* When we've just turned on the radio, we want to reprogram
......@@ -370,7 +370,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/* Turn RX back on */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_ON);
return 0;
}
......
drivers/net/wireless/rt2x00/rt2x00reg.h
浏览文件 @ ea175ee2
......@@ -85,8 +85,6 @@ enum dev_state {
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
STATE_RADIO_RX_ON_LINK,
STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
STATE_RADIO_IRQ_ON_ISR,
......
drivers/net/wireless/rt2x00/rt61pci.c
浏览文件 @ ea175ee2
......@@ -1623,8 +1623,7 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
(state == STATE_RADIO_RX_OFF) ||
(state == STATE_RADIO_RX_OFF_LINK));
(state == STATE_RADIO_RX_OFF));
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
......@@ -1745,9 +1744,7 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt61pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
drivers/net/wireless/rt2x00/rt73usb.c
浏览文件 @ ea175ee2
......@@ -1331,8 +1331,7 @@ static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
(state == STATE_RADIO_RX_OFF) ||
(state == STATE_RADIO_RX_OFF_LINK));
(state == STATE_RADIO_RX_OFF));
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
}
......@@ -1403,9 +1402,7 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt73usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
rt73usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或