提交 e97af4cb 编写于 作者: D Dmitry Torokhov

Input: wistron_btns - switch to using sparse keymap library

The keymap manipulation code was split into a library module,
so let's make us of it.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
上级 36203c4f
......@@ -80,6 +80,7 @@ config INPUT_WISTRON_BTNS
tristate "x86 Wistron laptop button interface"
depends on X86 && !X86_64
select INPUT_POLLDEV
select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
select CHECK_SIGNATURE
......
......@@ -21,6 +21,7 @@
#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/input-polldev.h>
#include <linux/input/sparse-keymap.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
......@@ -224,19 +225,8 @@ static void bios_set_state(u8 subsys, int enable)
/* Hardware database */
struct key_entry {
char type; /* See KE_* below */
u8 code;
union {
u16 keycode; /* For KE_KEY */
struct { /* For KE_SW */
u8 code;
u8 value;
} sw;
};
};
enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH };
#define KE_WIFI (KE_LAST + 1)
#define KE_BLUETOOTH (KE_LAST + 2)
#define FE_MAIL_LED 0x01
#define FE_WIFI_LED 0x02
......@@ -1037,21 +1027,6 @@ static unsigned long jiffies_last_press;
static bool wifi_enabled;
static bool bluetooth_enabled;
static void report_key(struct input_dev *dev, unsigned int keycode)
{
input_report_key(dev, keycode, 1);
input_sync(dev);
input_report_key(dev, keycode, 0);
input_sync(dev);
}
static void report_switch(struct input_dev *dev, unsigned int code, int value)
{
input_report_switch(dev, code, value);
input_sync(dev);
}
/* led management */
static void wistron_mail_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
......@@ -1128,43 +1103,13 @@ static inline void wistron_led_resume(void)
led_classdev_resume(&wistron_wifi_led);
}
static struct key_entry *wistron_get_entry_by_scancode(int code)
{
struct key_entry *key;
for (key = keymap; key->type != KE_END; key++)
if (code == key->code)
return key;
return NULL;
}
static struct key_entry *wistron_get_entry_by_keycode(int keycode)
{
struct key_entry *key;
for (key = keymap; key->type != KE_END; key++)
if (key->type == KE_KEY && keycode == key->keycode)
return key;
return NULL;
}
static void handle_key(u8 code)
{
const struct key_entry *key = wistron_get_entry_by_scancode(code);
const struct key_entry *key =
sparse_keymap_entry_from_scancode(wistron_idev->input, code);
if (key) {
switch (key->type) {
case KE_KEY:
report_key(wistron_idev->input, key->keycode);
break;
case KE_SW:
report_switch(wistron_idev->input,
key->sw.code, key->sw.value);
break;
case KE_WIFI:
if (have_wifi) {
wifi_enabled = !wifi_enabled;
......@@ -1180,7 +1125,9 @@ static void handle_key(u8 code)
break;
default:
BUG();
sparse_keymap_report_entry(wistron_idev->input,
key, 1, true);
break;
}
jiffies_last_press = jiffies;
} else
......@@ -1220,42 +1167,39 @@ static void wistron_poll(struct input_polled_dev *dev)
dev->poll_interval = POLL_INTERVAL_DEFAULT;
}
static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode)
static int __devinit wistron_setup_keymap(struct input_dev *dev,
struct key_entry *entry)
{
const struct key_entry *key = wistron_get_entry_by_scancode(scancode);
switch (entry->type) {
if (key && key->type == KE_KEY) {
*keycode = key->keycode;
return 0;
}
return -EINVAL;
}
/* if wifi or bluetooth are not available, create normal keys */
case KE_WIFI:
if (!have_wifi) {
entry->type = KE_KEY;
entry->keycode = KEY_WLAN;
}
break;
static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode)
{
struct key_entry *key;
int old_keycode;
if (keycode < 0 || keycode > KEY_MAX)
return -EINVAL;
key = wistron_get_entry_by_scancode(scancode);
if (key && key->type == KE_KEY) {
old_keycode = key->keycode;
key->keycode = keycode;
set_bit(keycode, dev->keybit);
if (!wistron_get_entry_by_keycode(old_keycode))
clear_bit(old_keycode, dev->keybit);
return 0;
case KE_BLUETOOTH:
if (!have_bluetooth) {
entry->type = KE_KEY;
entry->keycode = KEY_BLUETOOTH;
}
break;
case KE_END:
if (entry->code & FE_UNTESTED)
printk(KERN_WARNING "Untested laptop multimedia keys, "
"please report success or failure to "
"eric.piel@tremplin-utc.net\n");
break;
}
return -EINVAL;
return 0;
}
static int __devinit setup_input_dev(void)
{
struct key_entry *key;
struct input_dev *input_dev;
int error;
......@@ -1273,56 +1217,21 @@ static int __devinit setup_input_dev(void)
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &wistron_device->dev;
input_dev->getkeycode = wistron_getkeycode;
input_dev->setkeycode = wistron_setkeycode;
for (key = keymap; key->type != KE_END; key++) {
switch (key->type) {
case KE_KEY:
set_bit(EV_KEY, input_dev->evbit);
set_bit(key->keycode, input_dev->keybit);
break;
case KE_SW:
set_bit(EV_SW, input_dev->evbit);
set_bit(key->sw.code, input_dev->swbit);
break;
/* if wifi or bluetooth are not available, create normal keys */
case KE_WIFI:
if (!have_wifi) {
key->type = KE_KEY;
key->keycode = KEY_WLAN;
key--;
}
break;
case KE_BLUETOOTH:
if (!have_bluetooth) {
key->type = KE_KEY;
key->keycode = KEY_BLUETOOTH;
key--;
}
break;
default:
break;
}
}
/* reads information flags on KE_END */
if (key->code & FE_UNTESTED)
printk(KERN_WARNING "Untested laptop multimedia keys, "
"please report success or failure to eric.piel"
"@tremplin-utc.net\n");
error = sparse_keymap_setup(input_dev, keymap, wistron_setup_keymap);
if (error)
goto err_free_dev;
error = input_register_polled_device(wistron_idev);
if (error) {
input_free_polled_device(wistron_idev);
return error;
}
if (error)
goto err_free_keymap;
return 0;
err_free_keymap:
sparse_keymap_free(input_dev);
err_free_dev:
input_free_polled_device(wistron_idev);
return error;
}
/* Driver core */
......@@ -1371,6 +1280,7 @@ static int __devexit wistron_remove(struct platform_device *dev)
{
wistron_led_remove();
input_unregister_polled_device(wistron_idev);
sparse_keymap_free(wistron_idev->input);
input_free_polled_device(wistron_idev);
bios_detach();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册