phy: Add USB Type-C PHY driver for rk3399

Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
Type-C PHY is designed to support the USB3 and DP applications.
The USB3 operates in SuperSpeed mode and the DP can operate at RBR,
HBR and HBR2 data rates. This driver create 2 PHY devices separately
for USB3 and DisplyPort, and registers them under the child node.
Signed-off-by: NChris Zhong <zyw@rock-chips.com>
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Tested-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>

drivers/phy/Kconfig

@@ -397,6 +397,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY

drivers/phy/Makefile

@@ -44,6 +44,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o