提交 e8c8b3a7 编写于 作者: D David Chinner 提交者: Nathan Scott

[XFS] Introduce two new mount options (nolargeio/largeio) to allow

filesystems to expose the filesystem stripe width in stat(2) rather than
the page cache size. This allows applications requiring high bandwidth to
easily determine the optimum I/O size for the underlying filesystem. The
default is to report the page cache size (i.e. "nolargeio").

SGI-PV: 942818
SGI-Modid: xfs-linux:xfs-kern:23830a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>
上级 ee34807a
......@@ -189,7 +189,7 @@ xfs_revalidate_inode(
break;
}
inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blksize = xfs_preferred_iosize(mp);
inode->i_generation = ip->i_d.di_gen;
i_size_write(inode, ip->i_d.di_size);
inode->i_blocks =
......
......@@ -124,6 +124,7 @@ vn_revalidate_core(
inode->i_mtime = vap->va_mtime;
inode->i_ctime = vap->va_ctime;
inode->i_atime = vap->va_atime;
inode->i_blksize = vap->va_blocksize;
if (vap->va_xflags & XFS_XFLAG_IMMUTABLE)
inode->i_flags |= S_IMMUTABLE;
else
......
......@@ -106,5 +106,7 @@ struct xfs_mount_args {
#define XFSMNT_IHASHSIZE 0x20000000 /* inode hash table size */
#define XFSMNT_DIRSYNC 0x40000000 /* sync creat,link,unlink,rename
* symlink,mkdir,rmdir,mknod */
#define XFSMNT_COMPAT_IOSIZE 0x80000000 /* don't report large preferred
* I/O size in stat() */
#endif /* __XFS_CLNT_H__ */
......@@ -421,6 +421,9 @@ typedef struct xfs_mount {
* allocation */
#define XFS_MOUNT_IHASHSIZE 0x00100000 /* inode hash table size */
#define XFS_MOUNT_DIRSYNC 0x00200000 /* synchronous directory ops */
#define XFS_MOUNT_COMPAT_IOSIZE 0x00400000 /* don't report large preferred
* I/O size in stat() */
/*
* Default minimum read and write sizes.
......@@ -442,6 +445,30 @@ typedef struct xfs_mount {
#define XFS_WSYNC_READIO_LOG 15 /* 32K */
#define XFS_WSYNC_WRITEIO_LOG 14 /* 16K */
/*
* Allow large block sizes to be reported to userspace programs if the
* "largeio" mount option is used.
*
* If compatibility mode is specified, simply return the basic unit of caching
* so that we don't get inefficient read/modify/write I/O from user apps.
* Otherwise....
*
* If the underlying volume is a stripe, then return the stripe width in bytes
* as the recommended I/O size. It is not a stripe and we've set a default
* buffered I/O size, return that, otherwise return the compat default.
*/
static inline unsigned long
xfs_preferred_iosize(xfs_mount_t *mp)
{
if (mp->m_flags & XFS_MOUNT_COMPAT_IOSIZE)
return PAGE_CACHE_SIZE;
return (mp->m_swidth ?
(mp->m_swidth << mp->m_sb.sb_blocklog) :
((mp->m_flags & XFS_MOUNT_DFLT_IOSIZE) ?
(1 << (int)MAX(mp->m_readio_log, mp->m_writeio_log)) :
PAGE_CACHE_SIZE));
}
#define XFS_MAXIOFFSET(mp) ((mp)->m_maxioffset)
#define XFS_FORCED_SHUTDOWN(mp) ((mp)->m_flags & XFS_MOUNT_FS_SHUTDOWN)
......
......@@ -307,6 +307,9 @@ xfs_start_flags(
if (ap->flags & XFSMNT_DIRSYNC)
mp->m_flags |= XFS_MOUNT_DIRSYNC;
if (ap->flags & XFSMNT_COMPAT_IOSIZE)
mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE;
/*
* no recovery flag requires a read-only mount
*/
......@@ -1645,6 +1648,9 @@ xfs_vget(
#define MNTOPT_64BITINODE "inode64" /* inodes can be allocated anywhere */
#define MNTOPT_IKEEP "ikeep" /* do not free empty inode clusters */
#define MNTOPT_NOIKEEP "noikeep" /* free empty inode clusters */
#define MNTOPT_LARGEIO "largeio" /* report large I/O sizes in stat() */
#define MNTOPT_NOLARGEIO "nolargeio" /* do not report large I/O sizes
* in stat(). */
STATIC unsigned long
suffix_strtoul(const char *cp, char **endp, unsigned int base)
......@@ -1681,6 +1687,7 @@ xfs_parseargs(
int dsunit, dswidth, vol_dsunit, vol_dswidth;
int iosize;
args->flags |= XFSMNT_COMPAT_IOSIZE;
#if 0 /* XXX: off by default, until some remaining issues ironed out */
args->flags |= XFSMNT_IDELETE; /* default to on */
#endif
......@@ -1809,6 +1816,10 @@ xfs_parseargs(
args->flags &= ~XFSMNT_IDELETE;
} else if (!strcmp(this_char, MNTOPT_NOIKEEP)) {
args->flags |= XFSMNT_IDELETE;
} else if (!strcmp(this_char, MNTOPT_LARGEIO)) {
args->flags &= ~XFSMNT_COMPAT_IOSIZE;
} else if (!strcmp(this_char, MNTOPT_NOLARGEIO)) {
args->flags |= XFSMNT_COMPAT_IOSIZE;
} else if (!strcmp(this_char, "osyncisdsync")) {
/* no-op, this is now the default */
printk("XFS: osyncisdsync is now the default, option is deprecated.\n");
......
......@@ -181,40 +181,7 @@ xfs_getattr(
vap->va_rdev = 0;
if (!(ip->i_d.di_flags & XFS_DIFLAG_REALTIME)) {
#if 0
/* Large block sizes confuse various
* user space programs, so letting the
* stripe size through is not a good
* idea for now.
*/
vap->va_blocksize = mp->m_swidth ?
/*
* If the underlying volume is a stripe, then
* return the stripe width in bytes as the
* recommended I/O size.
*/
(mp->m_swidth << mp->m_sb.sb_blocklog) :
/*
* Return the largest of the preferred buffer
* sizes since doing small I/Os into larger
* buffers causes buffers to be decommissioned.
* The value returned is in bytes.
*/
(1 << (int)MAX(mp->m_readio_log,
mp->m_writeio_log));
#else
vap->va_blocksize =
/*
* Return the largest of the preferred buffer
* sizes since doing small I/Os into larger
* buffers causes buffers to be decommissioned.
* The value returned is in bytes.
*/
1 << (int)MAX(mp->m_readio_log,
mp->m_writeio_log);
#endif
vap->va_blocksize = xfs_preferred_iosize(mp);
} else {
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册