提交 e8a8b252 编写于 作者: S Stefan Weil 提交者: Jiri Kosina

Fix spelling mistakes in comments

 milisecond -> millisecond
 meassge -> message

Cc: Kalle Valo <kvalo@adurom.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 bb9fb420
...@@ -76,7 +76,7 @@ tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id ...@@ -76,7 +76,7 @@ tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id
* certain time interval * certain time interval
* *
* This function initializes a periodic timer to generate timer interrupt * This function initializes a periodic timer to generate timer interrupt
* after every time interval in milisecond * after every time interval in millisecond
* *
* @return On success: Effective interval set in mili-second * @return On success: Effective interval set in mili-second
* On failure: 0 * On failure: 0
...@@ -93,7 +93,7 @@ tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] T ...@@ -93,7 +93,7 @@ tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] T
* after certain time interval * after certain time interval
* *
* This function initializes a periodic timer to generate a single ticks after * This function initializes a periodic timer to generate a single ticks after
* certain time interval in milisecond * certain time interval in millisecond
* *
* @return On success: Effective interval set in mili-second * @return On success: Effective interval set in mili-second
* On failure: 0 * On failure: 0
......
...@@ -39,7 +39,7 @@ ...@@ -39,7 +39,7 @@
#define EINJ_PFX "EINJ: " #define EINJ_PFX "EINJ: "
#define SPIN_UNIT 100 /* 100ns */ #define SPIN_UNIT 100 /* 100ns */
/* Firmware should respond within 1 miliseconds */ /* Firmware should respond within 1 milliseconds */
#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC) #define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
/* /*
......
...@@ -53,7 +53,7 @@ ...@@ -53,7 +53,7 @@
sizeof(struct acpi_table_erst))) sizeof(struct acpi_table_erst)))
#define SPIN_UNIT 100 /* 100ns */ #define SPIN_UNIT 100 /* 100ns */
/* Firmware should respond within 1 miliseconds */ /* Firmware should respond within 1 milliseconds */
#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC) #define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
#define FIRMWARE_MAX_STALL 50 /* 50us */ #define FIRMWARE_MAX_STALL 50 /* 50us */
......
...@@ -1927,7 +1927,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) ...@@ -1927,7 +1927,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
* offset (8 bit): opcode * offset (8 bit): opcode
* offset + 1 (16 bit): time * offset + 1 (16 bit): time
* *
* Sleep for "time" miliseconds. * Sleep for "time" milliseconds.
*/ */
unsigned time = ROM16(bios->data[offset + 1]); unsigned time = ROM16(bios->data[offset + 1]);
...@@ -1935,7 +1935,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) ...@@ -1935,7 +1935,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
if (!iexec->execute) if (!iexec->execute)
return 3; return 3;
BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n", BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
offset, time); offset, time);
msleep(time); msleep(time);
......
...@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg { ...@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg {
/* OBSOLETE */ /* OBSOLETE */
#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6) #define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6)
/* Trace meassge on MBOX #A */ /* Trace message on MBOX #A */
#define WL1251_ACX_INTR_TRACE_A BIT(7) #define WL1251_ACX_INTR_TRACE_A BIT(7)
/* Trace meassge on MBOX #B */ /* Trace message on MBOX #B */
#define WL1251_ACX_INTR_TRACE_B BIT(8) #define WL1251_ACX_INTR_TRACE_B BIT(8)
/* Command processing completion */ /* Command processing completion */
......
...@@ -418,7 +418,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl); ...@@ -418,7 +418,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
#define WL1251_FW_NAME "wl1251-fw.bin" #define WL1251_FW_NAME "wl1251-fw.bin"
#define WL1251_NVS_NAME "wl1251-nvs.bin" #define WL1251_NVS_NAME "wl1251-nvs.bin"
#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */ #define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
#define WL1251_PART_DOWN_MEM_START 0x0 #define WL1251_PART_DOWN_MEM_START 0x0
#define WL1251_PART_DOWN_MEM_SIZE 0x16800 #define WL1251_PART_DOWN_MEM_SIZE 0x16800
......
...@@ -506,7 +506,7 @@ int wl1271_plt_stop(struct wl1271 *wl); ...@@ -506,7 +506,7 @@ int wl1271_plt_stop(struct wl1271 *wl);
/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
on in case is has been shut down shortly before */ on in case is has been shut down shortly before */
#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */ #define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */ #define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
#endif #endif
...@@ -47,9 +47,9 @@ ...@@ -47,9 +47,9 @@
#define WL1271_ACX_INTR_HW_AVAILABLE BIT(5) #define WL1271_ACX_INTR_HW_AVAILABLE BIT(5)
/* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */ /* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
#define WL1271_ACX_INTR_DATA BIT(6) #define WL1271_ACX_INTR_DATA BIT(6)
/* Trace meassge on MBOX #A */ /* Trace message on MBOX #A */
#define WL1271_ACX_INTR_TRACE_A BIT(7) #define WL1271_ACX_INTR_TRACE_A BIT(7)
/* Trace meassge on MBOX #B */ /* Trace message on MBOX #B */
#define WL1271_ACX_INTR_TRACE_B BIT(8) #define WL1271_ACX_INTR_TRACE_B BIT(8)
#define WL1271_ACX_INTR_ALL 0xFFFFFFFF #define WL1271_ACX_INTR_ALL 0xFFFFFFFF
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册