[SERIAL] typo: buad -> baud

Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by: NHorst Schirmeier <horst@schirmeier.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/mips/ddb5xxx/ddb5476/dbg_io.c

@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 

arch/mips/ddb5xxx/ddb5477/kgdb_io.c

@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 

arch/mips/gt64120/ev64120/serialGT.c

@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above

arch/mips/gt64120/momenco_ocelot/dbg_io.c

@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 

arch/mips/ite-boards/generic/dbg_io.c

@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 

arch/mips/momentum/jaguar_atx/dbg_io.c

@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 

arch/mips/momentum/ocelot_c/dbg_io.c

@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 

arch/mips/momentum/ocelot_g/dbg_io.c

@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 

include/asm-arm/arch-l7200/serial_l7200.h

@@ -28,7 +28,7 @@
 #define UARTDR			0x00	/* Tx/Rx data */
 #define RXSTAT			0x04	/* Rx status */
 #define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
 #define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
 #define UARTCON			0x14	/* control register */
 #define UARTFLG			0x18	/* flag register */

include/asm-arm/arch-l7200/uncompress.h

@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000	SJH	Created
  *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded buad rate
+ *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>