提交 e8386a0c 编写于 作者: M Masami Hiramatsu 提交者: Linus Torvalds

kprobes: support probing module __exit function

Allows kprobes to probe __exit routine.  This adds flags member to struct
kprobe.  When module is freed(kprobes hooks module_notifier to get this
event), kprobes which probe the functions in that module are set to "Gone"
flag to the flags member.  These "Gone" probes are never be enabled.
Users can check the GONE flag through debugfs.

This also removes mod_refcounted, because we couldn't free a module if
kprobe incremented the refcount of that module.

[akpm@linux-foundation.org: document some locking]
[mhiramat@redhat.com: bugfix: pass aggr_kprobe to arch_remove_kprobe]
[mhiramat@redhat.com: bugfix: release old_p's insn_slot before error return]
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 017c39bd
......@@ -497,7 +497,10 @@ The first column provides the kernel address where the probe is inserted.
The second column identifies the type of probe (k - kprobe, r - kretprobe
and j - jprobe), while the third column specifies the symbol+offset of
the probe. If the probed function belongs to a module, the module name
is also specified.
is also specified. Following columns show probe status. If the probe is on
a virtual address that is no longer valid (module init sections, module
virtual addresses that correspond to modules that've been unloaded),
such probes are marked with [GONE].
/debug/kprobes/enabled: Turn kprobes ON/OFF
......
......@@ -69,9 +69,6 @@ struct kprobe {
/* list of kprobes for multi-handler support */
struct list_head list;
/* Indicates that the corresponding module has been ref counted */
unsigned int mod_refcounted;
/*count the number of times this probe was temporarily disarmed */
unsigned long nmissed;
......@@ -103,8 +100,19 @@ struct kprobe {
/* copy of the original instruction */
struct arch_specific_insn ainsn;
/* Indicates various status flags. Protected by kprobe_mutex. */
u32 flags;
};
/* Kprobe status flags */
#define KPROBE_FLAG_GONE 1 /* breakpoint has already gone */
static inline int kprobe_gone(struct kprobe *p)
{
return p->flags & KPROBE_FLAG_GONE;
}
/*
* Special probe type that uses setjmp-longjmp type tricks to resume
* execution at a specified entry with a matching prototype corresponding
......
......@@ -327,7 +327,7 @@ static int __kprobes aggr_pre_handler(struct kprobe *p, struct pt_regs *regs)
struct kprobe *kp;
list_for_each_entry_rcu(kp, &p->list, list) {
if (kp->pre_handler) {
if (kp->pre_handler && !kprobe_gone(kp)) {
set_kprobe_instance(kp);
if (kp->pre_handler(kp, regs))
return 1;
......@@ -343,7 +343,7 @@ static void __kprobes aggr_post_handler(struct kprobe *p, struct pt_regs *regs,
struct kprobe *kp;
list_for_each_entry_rcu(kp, &p->list, list) {
if (kp->post_handler) {
if (kp->post_handler && !kprobe_gone(kp)) {
set_kprobe_instance(kp);
kp->post_handler(kp, regs, flags);
reset_kprobe_instance();
......@@ -545,9 +545,10 @@ static inline void add_aggr_kprobe(struct kprobe *ap, struct kprobe *p)
ap->addr = p->addr;
ap->pre_handler = aggr_pre_handler;
ap->fault_handler = aggr_fault_handler;
if (p->post_handler)
/* We don't care the kprobe which has gone. */
if (p->post_handler && !kprobe_gone(p))
ap->post_handler = aggr_post_handler;
if (p->break_handler)
if (p->break_handler && !kprobe_gone(p))
ap->break_handler = aggr_break_handler;
INIT_LIST_HEAD(&ap->list);
......@@ -566,17 +567,41 @@ static int __kprobes register_aggr_kprobe(struct kprobe *old_p,
int ret = 0;
struct kprobe *ap;
if (kprobe_gone(old_p)) {
/*
* Attempting to insert new probe at the same location that
* had a probe in the module vaddr area which already
* freed. So, the instruction slot has already been
* released. We need a new slot for the new probe.
*/
ret = arch_prepare_kprobe(old_p);
if (ret)
return ret;
}
if (old_p->pre_handler == aggr_pre_handler) {
copy_kprobe(old_p, p);
ret = add_new_kprobe(old_p, p);
ap = old_p;
} else {
ap = kzalloc(sizeof(struct kprobe), GFP_KERNEL);
if (!ap)
if (!ap) {
if (kprobe_gone(old_p))
arch_remove_kprobe(old_p);
return -ENOMEM;
}
add_aggr_kprobe(ap, old_p);
copy_kprobe(ap, p);
ret = add_new_kprobe(ap, p);
}
if (kprobe_gone(old_p)) {
/*
* If the old_p has gone, its breakpoint has been disarmed.
* We have to arm it again after preparing real kprobes.
*/
ap->flags &= ~KPROBE_FLAG_GONE;
if (kprobe_enabled)
arch_arm_kprobe(ap);
}
return ret;
}
......@@ -639,8 +664,7 @@ static int __kprobes __register_kprobe(struct kprobe *p,
return -EINVAL;
}
p->mod_refcounted = 0;
p->flags = 0;
/*
* Check if are we probing a module.
*/
......@@ -649,16 +673,14 @@ static int __kprobes __register_kprobe(struct kprobe *p,
struct module *calling_mod;
calling_mod = __module_text_address(called_from);
/*
* We must allow modules to probe themself and in this case
* avoid incrementing the module refcount, so as to allow
* unloading of self probing modules.
* We must hold a refcount of the probed module while updating
* its code to prohibit unexpected unloading.
*/
if (calling_mod != probed_mod) {
if (unlikely(!try_module_get(probed_mod))) {
preempt_enable();
return -EINVAL;
}
p->mod_refcounted = 1;
} else
probed_mod = NULL;
}
......@@ -687,8 +709,9 @@ static int __kprobes __register_kprobe(struct kprobe *p,
out:
mutex_unlock(&kprobe_mutex);
if (ret && probed_mod)
if (probed_mod)
module_put(probed_mod);
return ret;
}
......@@ -716,16 +739,16 @@ static int __kprobes __unregister_kprobe_top(struct kprobe *p)
list_is_singular(&old_p->list))) {
/*
* Only probe on the hash list. Disarm only if kprobes are
* enabled - otherwise, the breakpoint would already have
* been removed. We save on flushing icache.
* enabled and not gone - otherwise, the breakpoint would
* already have been removed. We save on flushing icache.
*/
if (kprobe_enabled)
if (kprobe_enabled && !kprobe_gone(old_p))
arch_disarm_kprobe(p);
hlist_del_rcu(&old_p->hlist);
} else {
if (p->break_handler)
if (p->break_handler && !kprobe_gone(p))
old_p->break_handler = NULL;
if (p->post_handler) {
if (p->post_handler && !kprobe_gone(p)) {
list_for_each_entry_rcu(list_p, &old_p->list, list) {
if ((list_p != p) && (list_p->post_handler))
goto noclean;
......@@ -740,27 +763,16 @@ static int __kprobes __unregister_kprobe_top(struct kprobe *p)
static void __kprobes __unregister_kprobe_bottom(struct kprobe *p)
{
struct module *mod;
struct kprobe *old_p;
if (p->mod_refcounted) {
/*
* Since we've already incremented refcount,
* we don't need to disable preemption.
*/
mod = module_text_address((unsigned long)p->addr);
if (mod)
module_put(mod);
}
if (list_empty(&p->list) || list_is_singular(&p->list)) {
if (!list_empty(&p->list)) {
/* "p" is the last child of an aggr_kprobe */
old_p = list_entry(p->list.next, struct kprobe, list);
list_del(&p->list);
kfree(old_p);
}
if (list_empty(&p->list))
arch_remove_kprobe(p);
else if (list_is_singular(&p->list)) {
/* "p" is the last child of an aggr_kprobe */
old_p = list_entry(p->list.next, struct kprobe, list);
list_del(&p->list);
arch_remove_kprobe(old_p);
kfree(old_p);
}
}
......@@ -1074,6 +1086,67 @@ static int __kprobes pre_handler_kretprobe(struct kprobe *p,
#endif /* CONFIG_KRETPROBES */
/* Set the kprobe gone and remove its instruction buffer. */
static void __kprobes kill_kprobe(struct kprobe *p)
{
struct kprobe *kp;
p->flags |= KPROBE_FLAG_GONE;
if (p->pre_handler == aggr_pre_handler) {
/*
* If this is an aggr_kprobe, we have to list all the
* chained probes and mark them GONE.
*/
list_for_each_entry_rcu(kp, &p->list, list)
kp->flags |= KPROBE_FLAG_GONE;
p->post_handler = NULL;
p->break_handler = NULL;
}
/*
* Here, we can remove insn_slot safely, because no thread calls
* the original probed function (which will be freed soon) any more.
*/
arch_remove_kprobe(p);
}
/* Module notifier call back, checking kprobes on the module */
static int __kprobes kprobes_module_callback(struct notifier_block *nb,
unsigned long val, void *data)
{
struct module *mod = data;
struct hlist_head *head;
struct hlist_node *node;
struct kprobe *p;
unsigned int i;
if (val != MODULE_STATE_GOING)
return NOTIFY_DONE;
/*
* module .text section will be freed. We need to
* disable kprobes which have been inserted in the section.
*/
mutex_lock(&kprobe_mutex);
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry_rcu(p, node, head, hlist)
if (within_module_core((unsigned long)p->addr, mod)) {
/*
* The vaddr this probe is installed will soon
* be vfreed buy not synced to disk. Hence,
* disarming the breakpoint isn't needed.
*/
kill_kprobe(p);
}
}
mutex_unlock(&kprobe_mutex);
return NOTIFY_DONE;
}
static struct notifier_block kprobe_module_nb = {
.notifier_call = kprobes_module_callback,
.priority = 0
};
static int __init init_kprobes(void)
{
int i, err = 0;
......@@ -1130,6 +1203,9 @@ static int __init init_kprobes(void)
err = arch_init_kprobes();
if (!err)
err = register_die_notifier(&kprobe_exceptions_nb);
if (!err)
err = register_module_notifier(&kprobe_module_nb);
kprobes_initialized = (err == 0);
if (!err)
......@@ -1150,10 +1226,12 @@ static void __kprobes report_probe(struct seq_file *pi, struct kprobe *p,
else
kprobe_type = "k";
if (sym)
seq_printf(pi, "%p %s %s+0x%x %s\n", p->addr, kprobe_type,
sym, offset, (modname ? modname : " "));
seq_printf(pi, "%p %s %s+0x%x %s %s\n", p->addr, kprobe_type,
sym, offset, (modname ? modname : " "),
(kprobe_gone(p) ? "[GONE]" : ""));
else
seq_printf(pi, "%p %s %p\n", p->addr, kprobe_type, p->addr);
seq_printf(pi, "%p %s %p %s\n", p->addr, kprobe_type, p->addr,
(kprobe_gone(p) ? "[GONE]" : ""));
}
static void __kprobes *kprobe_seq_start(struct seq_file *f, loff_t *pos)
......@@ -1234,7 +1312,8 @@ static void __kprobes enable_all_kprobes(void)
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry_rcu(p, node, head, hlist)
arch_arm_kprobe(p);
if (!kprobe_gone(p))
arch_arm_kprobe(p);
}
kprobe_enabled = true;
......@@ -1263,7 +1342,7 @@ static void __kprobes disable_all_kprobes(void)
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry_rcu(p, node, head, hlist) {
if (!arch_trampoline_kprobe(p))
if (!arch_trampoline_kprobe(p) && !kprobe_gone(p))
arch_disarm_kprobe(p);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册