提交 e7f767a7 编写于 作者: A Avinash Patil 提交者: John W. Linville

mwifiex: use map/unmap APIs in TX and RX to reduce memcpy

This patch is an enhacement to mwifiex_pcie driver to use
map/unmap PCI memory APIs. This reduces one memcpy each in TX
path and RX path, and enhances throughput.
Signed-off-by: NAvinash Patil <patila@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 fbd7e7ac
......@@ -278,14 +278,16 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
dev_dbg(adapter->dev, "data: -EBUSY is returned\n");
break;
case -1:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
dev_err(adapter->dev, "%s: host_to_card failed: %#x\n",
__func__, ret);
adapter->dbg.num_tx_host_to_card_failure++;
mwifiex_write_data_complete(adapter, skb_aggr, 1, ret);
return 0;
case -EINPROGRESS:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
break;
case 0:
mwifiex_write_data_complete(adapter, skb_aggr, 1, ret);
......
......@@ -796,15 +796,15 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter)
}
/*
* This function sends data buffer to device
* This function unmaps and frees downloaded data buffer
*/
static int
mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb)
static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
{
const u32 num_tx_buffs = MWIFIEX_MAX_TXRX_BD;
struct sk_buff *skb;
dma_addr_t buf_pa;
u32 wrdoneidx, rdptr, unmap_count = 0;
struct pcie_service_card *card = adapter->card;
u32 wrindx, rdptr;
phys_addr_t buf_pa;
__le16 *tmp;
if (!mwifiex_pcie_ok_to_access_hw(adapter))
mwifiex_pm_wakeup_card(adapter);
......@@ -812,34 +812,112 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb)
/* Read the TX ring read pointer set by firmware */
if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) {
dev_err(adapter->dev,
"SEND DATA: failed to read REG_TXBD_RDPTR\n");
"SEND COMP: failed to read REG_TXBD_RDPTR\n");
return -1;
}
wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK;
dev_dbg(adapter->dev, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n",
card->txbd_rdptr, rdptr);
dev_dbg(adapter->dev, "info: SEND DATA: <Rd: %#x, Wr: %#x>\n", rdptr,
card->txbd_wrptr);
if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) !=
(rdptr & MWIFIEX_TXBD_MASK)) ||
((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) !=
(rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) {
struct sk_buff *skb_data;
/* free from previous txbd_rdptr to current txbd_rdptr */
while (((card->txbd_rdptr & MWIFIEX_TXBD_MASK) !=
(rdptr & MWIFIEX_TXBD_MASK)) ||
((card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) !=
(rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) {
wrdoneidx = card->txbd_rdptr & MWIFIEX_TXBD_MASK;
skb = card->tx_buf_list[wrdoneidx];
if (skb) {
dev_dbg(adapter->dev,
"SEND COMP: Detach skb %p at txbd_rdidx=%d\n",
skb, wrdoneidx);
MWIFIEX_SKB_PACB(skb, &buf_pa);
pci_unmap_single(card->dev, buf_pa, skb->len,
PCI_DMA_TODEVICE);
unmap_count++;
if (card->txbd_flush)
mwifiex_write_data_complete(adapter, skb, 0,
-1);
else
mwifiex_write_data_complete(adapter, skb, 0, 0);
}
card->tx_buf_list[wrdoneidx] = NULL;
card->txbd_ring[wrdoneidx]->paddr = 0;
card->rxbd_ring[wrdoneidx]->len = 0;
card->rxbd_ring[wrdoneidx]->flags = 0;
card->txbd_rdptr++;
if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs)
card->txbd_rdptr = ((card->txbd_rdptr &
MWIFIEX_BD_FLAG_ROLLOVER_IND) ^
MWIFIEX_BD_FLAG_ROLLOVER_IND);
}
if (unmap_count)
adapter->data_sent = false;
if (card->txbd_flush) {
if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) ==
(card->txbd_rdptr & MWIFIEX_TXBD_MASK)) &&
((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) !=
(card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND)))
card->txbd_flush = 0;
else
mwifiex_clean_pcie_ring_buf(adapter);
}
return 0;
}
/* This function sends data buffer to device. First 4 bytes of payload
* are filled with payload length and payload type. Then this payload
* is mapped to PCI device memory. Tx ring pointers are advanced accordingly.
* Download ready interrupt to FW is deffered if Tx ring is not full and
* additional payload can be accomodated.
*/
static int
mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
struct mwifiex_tx_param *tx_param)
{
struct pcie_service_card *card = adapter->card;
u32 wrindx;
int ret;
dma_addr_t buf_pa;
__le16 *tmp;
if (!(skb->data && skb->len)) {
dev_err(adapter->dev, "%s(): invalid parameter <%p, %#x>\n",
__func__, skb->data, skb->len);
return -1;
}
if (!mwifiex_pcie_ok_to_access_hw(adapter))
mwifiex_pm_wakeup_card(adapter);
dev_dbg(adapter->dev, "info: SEND DATA: <Rd: %#x, Wr: %#x>\n",
card->txbd_rdptr, card->txbd_wrptr);
if (mwifiex_pcie_txbd_not_full(card)) {
u8 *payload;
adapter->data_sent = true;
skb_data = card->tx_buf_list[wrindx];
memcpy(skb_data->data, skb->data, skb->len);
payload = skb_data->data;
payload = skb->data;
tmp = (__le16 *)&payload[0];
*tmp = cpu_to_le16((u16)skb->len);
tmp = (__le16 *)&payload[2];
*tmp = cpu_to_le16(MWIFIEX_TYPE_DATA);
skb_put(skb_data, MWIFIEX_RX_DATA_BUF_SIZE - skb_data->len);
skb_trim(skb_data, skb->len);
MWIFIEX_SKB_PACB(skb_data, &buf_pa);
if (mwifiex_map_pci_memory(adapter, skb, skb->len ,
PCI_DMA_TODEVICE))
return -1;
wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK;
MWIFIEX_SKB_PACB(skb, &buf_pa);
card->tx_buf_list[wrindx] = skb;
card->txbd_ring[wrindx]->paddr = buf_pa;
card->txbd_ring[wrindx]->len = (u16)skb_data->len;
card->txbd_ring[wrindx]->len = (u16)skb->len;
card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC |
MWIFIEX_BD_FLAG_LAST_DESC;
......@@ -854,19 +932,28 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb)
card->txbd_wrptr)) {
dev_err(adapter->dev,
"SEND DATA: failed to write REG_TXBD_WRPTR\n");
return 0;
ret = -1;
goto done_unmap;
}
/* Send the TX ready interrupt */
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
CPU_INTR_DNLD_RDY)) {
dev_err(adapter->dev,
"SEND DATA: failed to assert door-bell intr\n");
return -1;
if ((mwifiex_pcie_txbd_not_full(card)) &&
tx_param->next_pkt_len) {
/* have more packets and TxBD still can hold more */
dev_dbg(adapter->dev,
"SEND DATA: delay dnld-rdy interrupt.\n");
adapter->data_sent = false;
} else {
/* Send the TX ready interrupt */
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
CPU_INTR_DNLD_RDY)) {
dev_err(adapter->dev,
"SEND DATA: failed to assert dnld-rdy interrupt.\n");
ret = -1;
goto done_unmap;
}
}
dev_dbg(adapter->dev, "info: SEND DATA: Updated <Rd: %#x, Wr: "
"%#x> and sent packet to firmware successfully\n",
rdptr, card->txbd_wrptr);
card->txbd_rdptr, card->txbd_wrptr);
} else {
dev_dbg(adapter->dev,
"info: TX Ring full, can't send packets to fw\n");
......@@ -879,7 +966,15 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb)
return -EBUSY;
}
return 0;
return -EINPROGRESS;
done_unmap:
MWIFIEX_SKB_PACB(skb, &buf_pa);
pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE);
card->tx_buf_list[wrindx] = NULL;
card->txbd_ring[wrindx]->paddr = 0;
card->txbd_ring[wrindx]->len = 0;
card->txbd_ring[wrindx]->flags = 0;
return ret;
}
/*
......@@ -890,9 +985,13 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;
u32 wrptr, rd_index;
dma_addr_t buf_pa;
int ret = 0;
struct sk_buff *skb_tmp = NULL;
if (!mwifiex_pcie_ok_to_access_hw(adapter))
mwifiex_pm_wakeup_card(adapter);
/* Read the RX ring Write pointer set by firmware */
if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) {
dev_err(adapter->dev,
......@@ -900,6 +999,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
ret = -1;
goto done;
}
card->rxbd_wrptr = wrptr;
while (((wrptr & MWIFIEX_RXBD_MASK) !=
(card->rxbd_rdptr & MWIFIEX_RXBD_MASK)) ||
......@@ -907,27 +1007,50 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
(card->rxbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) {
struct sk_buff *skb_data;
u16 rx_len;
__le16 pkt_len;
rd_index = card->rxbd_rdptr & MWIFIEX_RXBD_MASK;
skb_data = card->rx_buf_list[rd_index];
MWIFIEX_SKB_PACB(skb_data, &buf_pa);
pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE,
PCI_DMA_FROMDEVICE);
card->rx_buf_list[rd_index] = NULL;
/* Get data length from interface header -
first byte is len, second byte is type */
rx_len = *((u16 *)skb_data->data);
* first 2 bytes for len, next 2 bytes is for type
*/
pkt_len = *((__le16 *)skb_data->data);
rx_len = le16_to_cpu(pkt_len);
skb_put(skb_data, rx_len);
dev_dbg(adapter->dev,
"info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n",
card->rxbd_rdptr, wrptr, rx_len);
skb_tmp = dev_alloc_skb(rx_len);
skb_pull(skb_data, INTF_HEADER_LEN);
mwifiex_handle_rx_packet(adapter, skb_data);
skb_tmp = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE);
if (!skb_tmp) {
dev_dbg(adapter->dev,
"info: Failed to alloc skb for RX\n");
ret = -EBUSY;
goto done;
dev_err(adapter->dev,
"Unable to allocate skb.\n");
return -ENOMEM;
}
skb_put(skb_tmp, rx_len);
if (mwifiex_map_pci_memory(adapter, skb_tmp,
MWIFIEX_RX_DATA_BUF_SIZE,
PCI_DMA_FROMDEVICE))
return -1;
MWIFIEX_SKB_PACB(skb_tmp, &buf_pa);
dev_dbg(adapter->dev,
"RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n",
skb_tmp, rd_index);
card->rx_buf_list[rd_index] = skb_tmp;
card->rxbd_ring[rd_index]->paddr = buf_pa;
card->rxbd_ring[rd_index]->len = skb_tmp->len;
card->rxbd_ring[rd_index]->flags = 0;
memcpy(skb_tmp->data, skb_data->data + INTF_HEADER_LEN, rx_len);
if ((++card->rxbd_rdptr & MWIFIEX_RXBD_MASK) ==
MWIFIEX_MAX_TXRX_BD) {
card->rxbd_rdptr = ((card->rxbd_rdptr &
......@@ -955,12 +1078,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
}
dev_dbg(adapter->dev,
"info: RECV DATA: Rcvd packet from fw successfully\n");
mwifiex_handle_rx_packet(adapter, skb_tmp);
card->rxbd_wrptr = wrptr;
}
done:
if (ret && skb_tmp)
dev_kfree_skb_any(skb_tmp);
return ret;
}
......@@ -1732,10 +1853,10 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
while (pcie_ireg & HOST_INTR_MASK) {
if (pcie_ireg & HOST_INTR_DNLD_DONE) {
pcie_ireg &= ~HOST_INTR_DNLD_DONE;
if (adapter->data_sent) {
dev_dbg(adapter->dev, "info: DATA sent intr\n");
adapter->data_sent = false;
}
dev_dbg(adapter->dev, "info: TX DNLD Done\n");
ret = mwifiex_pcie_send_data_complete(adapter);
if (ret)
return ret;
}
if (pcie_ireg & HOST_INTR_UPLD_RDY) {
pcie_ireg &= ~HOST_INTR_UPLD_RDY;
......@@ -1812,7 +1933,7 @@ static int mwifiex_pcie_host_to_card(struct mwifiex_adapter *adapter, u8 type,
}
if (type == MWIFIEX_TYPE_DATA)
return mwifiex_pcie_send_data(adapter, skb);
return mwifiex_pcie_send_data(adapter, skb, tx_param);
else if (type == MWIFIEX_TYPE_CMD)
return mwifiex_pcie_send_cmd(adapter, skb);
......
......@@ -159,4 +159,15 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr)
return 0;
}
static inline int
mwifiex_pcie_txbd_not_full(struct pcie_service_card *card)
{
if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) !=
(card->txbd_rdptr & MWIFIEX_TXBD_MASK)) ||
((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) !=
(card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND)))
return 1;
return 0;
}
#endif /* _MWIFIEX_PCIE_H */
......@@ -117,14 +117,16 @@ int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb,
dev_dbg(adapter->dev, "data: -EBUSY is returned\n");
break;
case -1:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
dev_err(adapter->dev, "mwifiex_write_data_async failed: 0x%X\n",
ret);
adapter->dbg.num_tx_host_to_card_failure++;
mwifiex_write_data_complete(adapter, skb, 0, ret);
break;
case -EINPROGRESS:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
break;
case 0:
mwifiex_write_data_complete(adapter, skb, 0, ret);
......
......@@ -1208,13 +1208,15 @@ mwifiex_send_processed_packet(struct mwifiex_private *priv,
ra_list_flags);
break;
case -1:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
dev_err(adapter->dev, "host_to_card failed: %#x\n", ret);
adapter->dbg.num_tx_host_to_card_failure++;
mwifiex_write_data_complete(adapter, skb, 0, ret);
break;
case -EINPROGRESS:
adapter->data_sent = false;
if (adapter->iface_type != MWIFIEX_PCIE)
adapter->data_sent = false;
default:
break;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册