提交 e61444d9 编写于 作者: D David S. Miller
......@@ -79,6 +79,8 @@ static const struct pci_device_id ath5k_led_devices[] = {
{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
/* IBM-specific AR5212 (all others) */
{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
/* Dell Vostro A860 (shahar@shahar-or.co.il) */
{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0112), ATH_LED(3, 0) },
{ }
};
......
......@@ -2078,7 +2078,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
&txq->axq_q, lastbf->list.prev);
txq->axq_depth--;
txok = (ds->ds_txstat.ts_status == 0);
txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
txq->axq_tx_inprogress = false;
spin_unlock_bh(&txq->axq_lock);
......
......@@ -1353,7 +1353,7 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
if (priv->stations[sta_id].tid[tid].agg.state ==
IWL_EMPTYING_HW_QUEUE_ADDBA) {
IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
return 0;
}
......
此差异已折叠。
......@@ -427,7 +427,7 @@ int hermesi_program_init(hermes_t *hw, u32 offset)
if (err)
return err;
pr_debug(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset);
err = hermes_doicmd_wait(hw,
HERMES_PROGRAM_ENABLE_VOLATILE,
offset & 0xFFFFu,
......
......@@ -23,6 +23,7 @@
#define RTL8187_EEPROM_TXPWR_CHAN_1 0x16 /* 3 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_6 0x1B /* 2 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_4 0x3D /* 2 channels */
#define RTL8187_EEPROM_SELECT_GPIO 0x3B
#define RTL8187_REQT_READ 0xC0
#define RTL8187_REQT_WRITE 0x40
......@@ -31,6 +32,9 @@
#define RTL8187_MAX_RX 0x9C4
#define RFKILL_MASK_8187_89_97 0x2
#define RFKILL_MASK_8198 0x4
struct rtl8187_rx_info {
struct urb *urb;
struct ieee80211_hw *dev;
......@@ -122,6 +126,7 @@ struct rtl8187_priv {
u8 noise;
u8 slot_time;
u8 aifsn[4];
u8 rfkill_mask;
struct {
__le64 buf;
struct sk_buff_head queue;
......
......@@ -1322,6 +1322,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
struct ieee80211_channel *channel;
const char *chip_name;
u16 txpwr, reg;
u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
int err, i;
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
......@@ -1481,6 +1482,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
/* Handle the differing rfkill GPIO bit in different models */
priv->rfkill_mask = RFKILL_MASK_8187_89_97;
if (product_id == 0x8197 || product_id == 0x8198) {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
if (reg & 0xFF00)
priv->rfkill_mask = RFKILL_MASK_8198;
}
/*
* XXX: Once this driver supports anything that requires
......@@ -1509,9 +1517,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
chip_name, priv->asic_rev, priv->rf->name);
chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
#ifdef CONFIG_RTL8187_LEDS
eeprom_93cx6_read(&eeprom, 0x3F, &reg);
......
......@@ -25,10 +25,10 @@ static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
u8 gpio;
gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02);
rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask);
gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
return gpio & 0x02;
return gpio & priv->rfkill_mask;
}
void rtl8187_rfkill_init(struct ieee80211_hw *hw)
......
......@@ -629,10 +629,6 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
goto out_sleep;
}
ret = wl1251_build_null_data(wl);
if (ret < 0)
goto out_sleep;
if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
wl1251_debug(DEBUG_PSM, "psm enabled");
......@@ -1110,6 +1106,21 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
if (ret < 0)
goto out;
if (changed & BSS_CHANGED_BSSID) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
ret = wl1251_build_null_data(wl);
if (ret < 0)
goto out;
if (wl->bss_type != BSS_TYPE_IBSS) {
ret = wl1251_join(wl, wl->bss_type, wl->channel,
wl->beacon_int, wl->dtim_period);
if (ret < 0)
goto out_sleep;
}
}
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
wl->beacon_int = bss_conf->beacon_int;
......@@ -1169,23 +1180,6 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
}
}
if (changed & BSS_CHANGED_BSSID) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
ret = wl1251_build_null_data(wl);
if (ret < 0)
goto out;
if (wl->bss_type != BSS_TYPE_IBSS) {
ret = wl1251_join(wl, wl->bss_type, wl->channel,
wl->beacon_int, wl->dtim_period);
if (ret < 0)
goto out_sleep;
wl1251_warning("Set ctsprotect failed %d", ret);
goto out_sleep;
}
}
if (changed & BSS_CHANGED_BEACON) {
beacon = ieee80211_beacon_get(hw, vif);
ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
......
......@@ -746,6 +746,7 @@ struct ieee80211_local {
unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
bool pspolling;
bool scan_ps_enabled;
/*
* PS can only be enabled when we have exactly one managed
* interface (and monitors) in PS, this then points there.
......
......@@ -1083,8 +1083,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ieee80211_set_wmm_default(sdata);
ieee80211_recalc_idle(local);
/* channel(_type) changes are handled by ieee80211_hw_config */
local->oper_channel_type = NL80211_CHAN_NO_HT;
......@@ -1370,6 +1368,7 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
if (!wk) {
ieee80211_set_disassoc(sdata, true);
ieee80211_recalc_idle(sdata->local);
} else {
list_del(&wk->list);
kfree(wk);
......@@ -1403,6 +1402,7 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
sdata->dev->name, mgmt->sa, reason_code);
ieee80211_set_disassoc(sdata, false);
ieee80211_recalc_idle(sdata->local);
return RX_MGMT_CFG80211_DISASSOC;
}
......@@ -2117,6 +2117,7 @@ static void ieee80211_sta_work(struct work_struct *work)
" after %dms, disconnecting.\n",
bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
ieee80211_set_disassoc(sdata, true);
ieee80211_recalc_idle(local);
mutex_unlock(&ifmgd->mtx);
/*
* must be outside lock due to cfg80211,
......@@ -2560,6 +2561,8 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
IEEE80211_STYPE_DEAUTH, req->reason_code,
cookie);
ieee80211_recalc_idle(sdata->local);
return 0;
}
......@@ -2592,5 +2595,8 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
ieee80211_send_deauth_disassoc(sdata, req->bss->bssid,
IEEE80211_STYPE_DISASSOC, req->reason_code,
cookie);
ieee80211_recalc_idle(sdata->local);
return 0;
}
......@@ -227,7 +227,8 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local)
static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
bool ps = false;
local->scan_ps_enabled = false;
/* FIXME: what to do when local->pspolling is true? */
......@@ -235,12 +236,13 @@ static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
cancel_work_sync(&local->dynamic_ps_enable_work);
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
ps = true;
local->scan_ps_enabled = true;
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
if (!ps || !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
if (!(local->scan_ps_enabled) ||
!(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
/*
* If power save was enabled, no need to send a nullfunc
* frame because AP knows that we are sleeping. But if the
......@@ -261,7 +263,7 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
if (!local->ps_sdata)
ieee80211_send_nullfunc(local, sdata, 0);
else {
else if (local->scan_ps_enabled) {
/*
* In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
* will send a nullfunc frame with the powersave bit set
......@@ -277,6 +279,16 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
*/
local->hw.conf.flags |= IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
} else if (local->hw.conf.dynamic_ps_timeout > 0) {
/*
* If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
* had been running before leaving the operating channel,
* restart the timer now and send a nullfunc frame to inform
* the AP that we are awake.
*/
ieee80211_send_nullfunc(local, sdata, 0);
mod_timer(&local->dynamic_ps_timer, jiffies +
msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
}
}
......
......@@ -579,7 +579,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
if (elen > left)
break;
if (calc_crc && id < 64 && (filter & BIT(id)))
if (calc_crc && id < 64 && (filter & (1ULL << id)))
crc = crc32_be(crc, pos - 2, elen + 2);
switch (id) {
......
......@@ -579,6 +579,8 @@ static ssize_t rfkill_name_show(struct device *dev,
static const char *rfkill_get_type_str(enum rfkill_type type)
{
BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1);
switch (type) {
case RFKILL_TYPE_WLAN:
return "wlan";
......@@ -597,8 +599,6 @@ static const char *rfkill_get_type_str(enum rfkill_type type)
default:
BUG();
}
BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1);
}
static ssize_t rfkill_type_show(struct device *dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册