提交 e5c0d6ad 编写于 作者: R Roland Dreier 提交者: Nicholas Bellinger

target: Add tracepoints for SCSI commands being processed

This patch adds tracepoints to the target code for commands being
received and being completed, which is quite useful for debugging
interactions with initiators. For example, one can do something like the
following to watch commands that are completing unsuccessfully:

    # echo 'scsi_status!=0' > /sys/kernel/debug/tracing/events/target/target_cmd_complete/filter
    # echo 1 > /sys/kernel/debug/tracing/events/target/target_cmd_complete/enable

        <run command that fails>

    # cat /sys/kernel/debug/tracing/trace
         iscsi_trx-0-1902  [003] ...1 990185.810385: target_cmd_complete: iqn.1993-08.org.debian:01:e51ede6aacfd <- LUN 001 status CHECK CONDITION (sense len 18 / 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00)  0x95 data_length    512  CDB 95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  (TA:SIMPLE C:00)

(v2: Drop undefined COMPARE_AND_WRITE)
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
上级 b2cb9649
......@@ -52,6 +52,9 @@
#include "target_core_pr.h"
#include "target_core_ua.h"
#define CREATE_TRACE_POINTS
#include <trace/events/target.h>
static struct workqueue_struct *target_completion_wq;
static struct kmem_cache *se_sess_cache;
struct kmem_cache *se_ua_cache;
......@@ -1123,6 +1126,8 @@ target_setup_cmd_from_cdb(struct se_cmd *cmd, unsigned char *cdb)
*/
memcpy(cmd->t_task_cdb, cdb, scsi_command_size(cdb));
trace_target_sequencer_start(cmd);
/*
* Check for an existing UNIT ATTENTION condition
*/
......@@ -1546,7 +1551,8 @@ void transport_generic_request_failure(struct se_cmd *cmd,
cmd->orig_fe_lun, 0x2C,
ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS);
ret = cmd->se_tfo->queue_status(cmd);
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo-> queue_status(cmd);
if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
goto check_stop;
......@@ -1766,6 +1772,7 @@ static void transport_complete_qf(struct se_cmd *cmd)
transport_complete_task_attr(cmd);
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) {
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_status(cmd);
if (ret)
goto out;
......@@ -1773,6 +1780,7 @@ static void transport_complete_qf(struct se_cmd *cmd)
switch (cmd->data_direction) {
case DMA_FROM_DEVICE:
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_data_in(cmd);
break;
case DMA_TO_DEVICE:
......@@ -1783,6 +1791,7 @@ static void transport_complete_qf(struct se_cmd *cmd)
}
/* Fall through for DMA_TO_DEVICE */
case DMA_NONE:
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_status(cmd);
break;
default:
......@@ -1861,6 +1870,7 @@ static void target_complete_ok_work(struct work_struct *work)
}
spin_unlock(&cmd->se_lun->lun_sep_lock);
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_data_in(cmd);
if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
......@@ -1889,6 +1899,7 @@ static void target_complete_ok_work(struct work_struct *work)
}
/* Fall through for DMA_TO_DEVICE */
case DMA_NONE:
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_status(cmd);
if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
......@@ -2745,6 +2756,7 @@ transport_send_check_condition_and_sense(struct se_cmd *cmd,
cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER;
after_reason:
trace_target_cmd_complete(cmd);
return cmd->se_tfo->queue_status(cmd);
}
EXPORT_SYMBOL(transport_send_check_condition_and_sense);
......@@ -2761,6 +2773,7 @@ int transport_check_aborted_status(struct se_cmd *cmd, int send_status)
cmd->t_task_cdb[0], cmd->se_tfo->get_task_tag(cmd));
cmd->se_cmd_flags |= SCF_SENT_DELAYED_TAS;
trace_target_cmd_complete(cmd);
cmd->se_tfo->queue_status(cmd);
return 1;
......@@ -2798,6 +2811,7 @@ void transport_send_task_abort(struct se_cmd *cmd)
" ITT: 0x%08x\n", cmd->t_task_cdb[0],
cmd->se_tfo->get_task_tag(cmd));
trace_target_cmd_complete(cmd);
cmd->se_tfo->queue_status(cmd);
}
......
#undef TRACE_SYSTEM
#define TRACE_SYSTEM target
#if !defined(_TRACE_TARGET_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_TARGET_H
#include <linux/tracepoint.h>
#include <linux/trace_seq.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <target/target_core_base.h>
/* cribbed verbatim from <trace/event/scsi.h> */
#define scsi_opcode_name(opcode) { opcode, #opcode }
#define show_opcode_name(val) \
__print_symbolic(val, \
scsi_opcode_name(TEST_UNIT_READY), \
scsi_opcode_name(REZERO_UNIT), \
scsi_opcode_name(REQUEST_SENSE), \
scsi_opcode_name(FORMAT_UNIT), \
scsi_opcode_name(READ_BLOCK_LIMITS), \
scsi_opcode_name(REASSIGN_BLOCKS), \
scsi_opcode_name(INITIALIZE_ELEMENT_STATUS), \
scsi_opcode_name(READ_6), \
scsi_opcode_name(WRITE_6), \
scsi_opcode_name(SEEK_6), \
scsi_opcode_name(READ_REVERSE), \
scsi_opcode_name(WRITE_FILEMARKS), \
scsi_opcode_name(SPACE), \
scsi_opcode_name(INQUIRY), \
scsi_opcode_name(RECOVER_BUFFERED_DATA), \
scsi_opcode_name(MODE_SELECT), \
scsi_opcode_name(RESERVE), \
scsi_opcode_name(RELEASE), \
scsi_opcode_name(COPY), \
scsi_opcode_name(ERASE), \
scsi_opcode_name(MODE_SENSE), \
scsi_opcode_name(START_STOP), \
scsi_opcode_name(RECEIVE_DIAGNOSTIC), \
scsi_opcode_name(SEND_DIAGNOSTIC), \
scsi_opcode_name(ALLOW_MEDIUM_REMOVAL), \
scsi_opcode_name(SET_WINDOW), \
scsi_opcode_name(READ_CAPACITY), \
scsi_opcode_name(READ_10), \
scsi_opcode_name(WRITE_10), \
scsi_opcode_name(SEEK_10), \
scsi_opcode_name(POSITION_TO_ELEMENT), \
scsi_opcode_name(WRITE_VERIFY), \
scsi_opcode_name(VERIFY), \
scsi_opcode_name(SEARCH_HIGH), \
scsi_opcode_name(SEARCH_EQUAL), \
scsi_opcode_name(SEARCH_LOW), \
scsi_opcode_name(SET_LIMITS), \
scsi_opcode_name(PRE_FETCH), \
scsi_opcode_name(READ_POSITION), \
scsi_opcode_name(SYNCHRONIZE_CACHE), \
scsi_opcode_name(LOCK_UNLOCK_CACHE), \
scsi_opcode_name(READ_DEFECT_DATA), \
scsi_opcode_name(MEDIUM_SCAN), \
scsi_opcode_name(COMPARE), \
scsi_opcode_name(COPY_VERIFY), \
scsi_opcode_name(WRITE_BUFFER), \
scsi_opcode_name(READ_BUFFER), \
scsi_opcode_name(UPDATE_BLOCK), \
scsi_opcode_name(READ_LONG), \
scsi_opcode_name(WRITE_LONG), \
scsi_opcode_name(CHANGE_DEFINITION), \
scsi_opcode_name(WRITE_SAME), \
scsi_opcode_name(UNMAP), \
scsi_opcode_name(READ_TOC), \
scsi_opcode_name(LOG_SELECT), \
scsi_opcode_name(LOG_SENSE), \
scsi_opcode_name(XDWRITEREAD_10), \
scsi_opcode_name(MODE_SELECT_10), \
scsi_opcode_name(RESERVE_10), \
scsi_opcode_name(RELEASE_10), \
scsi_opcode_name(MODE_SENSE_10), \
scsi_opcode_name(PERSISTENT_RESERVE_IN), \
scsi_opcode_name(PERSISTENT_RESERVE_OUT), \
scsi_opcode_name(VARIABLE_LENGTH_CMD), \
scsi_opcode_name(REPORT_LUNS), \
scsi_opcode_name(MAINTENANCE_IN), \
scsi_opcode_name(MAINTENANCE_OUT), \
scsi_opcode_name(MOVE_MEDIUM), \
scsi_opcode_name(EXCHANGE_MEDIUM), \
scsi_opcode_name(READ_12), \
scsi_opcode_name(WRITE_12), \
scsi_opcode_name(WRITE_VERIFY_12), \
scsi_opcode_name(SEARCH_HIGH_12), \
scsi_opcode_name(SEARCH_EQUAL_12), \
scsi_opcode_name(SEARCH_LOW_12), \
scsi_opcode_name(READ_ELEMENT_STATUS), \
scsi_opcode_name(SEND_VOLUME_TAG), \
scsi_opcode_name(WRITE_LONG_2), \
scsi_opcode_name(READ_16), \
scsi_opcode_name(WRITE_16), \
scsi_opcode_name(VERIFY_16), \
scsi_opcode_name(WRITE_SAME_16), \
scsi_opcode_name(SERVICE_ACTION_IN), \
scsi_opcode_name(SAI_READ_CAPACITY_16), \
scsi_opcode_name(SAI_GET_LBA_STATUS), \
scsi_opcode_name(MI_REPORT_TARGET_PGS), \
scsi_opcode_name(MO_SET_TARGET_PGS), \
scsi_opcode_name(READ_32), \
scsi_opcode_name(WRITE_32), \
scsi_opcode_name(WRITE_SAME_32), \
scsi_opcode_name(ATA_16), \
scsi_opcode_name(ATA_12))
#define show_task_attribute_name(val) \
__print_symbolic(val, \
{ MSG_SIMPLE_TAG, "SIMPLE" }, \
{ MSG_HEAD_TAG, "HEAD" }, \
{ MSG_ORDERED_TAG, "ORDERED" }, \
{ MSG_ACA_TAG, "ACA" } )
#define show_scsi_status_name(val) \
__print_symbolic(val, \
{ SAM_STAT_GOOD, "GOOD" }, \
{ SAM_STAT_CHECK_CONDITION, "CHECK CONDITION" }, \
{ SAM_STAT_CONDITION_MET, "CONDITION MET" }, \
{ SAM_STAT_BUSY, "BUSY" }, \
{ SAM_STAT_INTERMEDIATE, "INTERMEDIATE" }, \
{ SAM_STAT_INTERMEDIATE_CONDITION_MET, "INTERMEDIATE CONDITION MET" }, \
{ SAM_STAT_RESERVATION_CONFLICT, "RESERVATION CONFLICT" }, \
{ SAM_STAT_COMMAND_TERMINATED, "COMMAND TERMINATED" }, \
{ SAM_STAT_TASK_SET_FULL, "TASK SET FULL" }, \
{ SAM_STAT_ACA_ACTIVE, "ACA ACTIVE" }, \
{ SAM_STAT_TASK_ABORTED, "TASK ABORTED" } )
TRACE_EVENT(target_sequencer_start,
TP_PROTO(struct se_cmd *cmd),
TP_ARGS(cmd),
TP_STRUCT__entry(
__field( unsigned int, unpacked_lun )
__field( unsigned int, opcode )
__field( unsigned int, data_length )
__field( unsigned int, task_attribute )
__array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE )
__string( initiator, cmd->se_sess->se_node_acl->initiatorname )
),
TP_fast_assign(
__entry->unpacked_lun = cmd->se_lun->unpacked_lun;
__entry->opcode = cmd->t_task_cdb[0];
__entry->data_length = cmd->data_length;
__entry->task_attribute = cmd->sam_task_attr;
memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
),
TP_printk("%s -> LUN %03u %s data_length %6u CDB %s (TA:%s C:%02x)",
__get_str(initiator), __entry->unpacked_lun,
show_opcode_name(__entry->opcode),
__entry->data_length, __print_hex(__entry->cdb, 16),
show_task_attribute_name(__entry->task_attribute),
scsi_command_size(__entry->cdb) <= 16 ?
__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
__entry->cdb[1]
)
);
TRACE_EVENT(target_cmd_complete,
TP_PROTO(struct se_cmd *cmd),
TP_ARGS(cmd),
TP_STRUCT__entry(
__field( unsigned int, unpacked_lun )
__field( unsigned int, opcode )
__field( unsigned int, data_length )
__field( unsigned int, task_attribute )
__field( unsigned char, scsi_status )
__field( unsigned char, sense_length )
__array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE )
__array( unsigned char, sense_data, 18 )
__string(initiator, cmd->se_sess->se_node_acl->initiatorname)
),
TP_fast_assign(
__entry->unpacked_lun = cmd->se_lun->unpacked_lun;
__entry->opcode = cmd->t_task_cdb[0];
__entry->data_length = cmd->data_length;
__entry->task_attribute = cmd->sam_task_attr;
__entry->scsi_status = cmd->scsi_status;
__entry->sense_length = cmd->scsi_status == SAM_STAT_CHECK_CONDITION ?
min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0;
memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
memcpy(__entry->sense_data, cmd->sense_buffer, __entry->sense_length);
__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
),
TP_printk("%s <- LUN %03u status %s (sense len %d%s%s) %s data_length %6u CDB %s (TA:%s C:%02x)",
__get_str(initiator), __entry->unpacked_lun,
show_scsi_status_name(__entry->scsi_status),
__entry->sense_length, __entry->sense_length ? " / " : "",
__print_hex(__entry->sense_data, __entry->sense_length),
show_opcode_name(__entry->opcode),
__entry->data_length, __print_hex(__entry->cdb, 16),
show_task_attribute_name(__entry->task_attribute),
scsi_command_size(__entry->cdb) <= 16 ?
__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
__entry->cdb[1]
)
);
#endif /* _TRACE_TARGET_H */
/* This part must be outside protection */
#include <trace/define_trace.h>
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册