提交 e5b0d2d1 编写于 作者: X Xiangliang Yu 提交者: Jon Mason

NTB: add support for hotplug feature

AMD NTB support hotplug under B2B mode. NTB will trigger link
up/down interrupt event when doing plug add/remove, this patch
implements the two interrupt event to support B2B hotplug function.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NShyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: NAllen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
上级 783dfa6c
......@@ -199,6 +199,11 @@ static int amd_link_is_up(struct amd_ntb_dev *ndev)
if (!ndev->peer_sta)
return NTB_LNK_STA_ACTIVE(ndev->cntl_sta);
if (ndev->peer_sta & AMD_LINK_UP_EVENT) {
ndev->peer_sta = 0;
return 1;
}
/* If peer_sta is reset or D0 event, the ISR has
* started a timer to check link status of hardware.
* So here just clear status bit. And if peer_sta is
......@@ -207,7 +212,7 @@ static int amd_link_is_up(struct amd_ntb_dev *ndev)
*/
if (ndev->peer_sta & AMD_PEER_RESET_EVENT)
ndev->peer_sta &= ~AMD_PEER_RESET_EVENT;
else if (ndev->peer_sta & AMD_PEER_D0_EVENT)
else if (ndev->peer_sta & (AMD_PEER_D0_EVENT | AMD_LINK_DOWN_EVENT))
ndev->peer_sta = 0;
return 0;
......@@ -491,6 +496,8 @@ static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
break;
case AMD_PEER_D3_EVENT:
case AMD_PEER_PMETO_EVENT:
case AMD_LINK_UP_EVENT:
case AMD_LINK_DOWN_EVENT:
amd_ack_smu(ndev, status);
/* link down */
......
......@@ -148,9 +148,12 @@ enum {
AMD_PEER_D3_EVENT = BIT(2),
AMD_PEER_PMETO_EVENT = BIT(3),
AMD_PEER_D0_EVENT = BIT(4),
AMD_LINK_UP_EVENT = BIT(5),
AMD_LINK_DOWN_EVENT = BIT(6),
AMD_EVENT_INTMASK = (AMD_PEER_FLUSH_EVENT |
AMD_PEER_RESET_EVENT | AMD_PEER_D3_EVENT |
AMD_PEER_PMETO_EVENT | AMD_PEER_D0_EVENT),
AMD_PEER_PMETO_EVENT | AMD_PEER_D0_EVENT |
AMD_LINK_UP_EVENT | AMD_LINK_DOWN_EVENT),
AMD_PMESTAT_OFFSET = 0x480,
AMD_PMSGTRIG_OFFSET = 0x490,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册