OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs

To standarize among other uarts (1 to 3), we shall now:

 - Enable uart4 autodile bit.
 - Enable uart4 wakeup in PER.
 - Allow uart4 to wakeup the MPU.
Signed-off-by: NSergio Aguirre <saaguirre@ti.com>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -649,6 +649,8 @@
 #define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
+#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
+#define OMAP3630_AUTO_UART4_SHIFT			18
 #define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
 #define OMAP3430_AUTO_GPIO6_SHIFT			17
 #define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)

arch/arm/mach-omap2/pm34xx.c

@@ -676,6 +676,14 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
+	u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_AUTO_UART4_MASK : 0;
+	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_EN_UART4_MASK : 0;
+	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_GRPSEL_UART4_MASK : 0;
+
+
 	/* XXX Reset all wkdeps. This should be done when initializing
 	 * powerdomains */
 	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@@ -762,6 +770,7 @@ static void __init prcm_setup_regs(void)
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
+		omap3630_auto_uart4_mask |
 		OMAP3430_AUTO_GPIO6_MASK |
 		OMAP3430_AUTO_GPIO5_MASK |
 		OMAP3430_AUTO_GPIO4_MASK |
@@ -838,14 +847,16 @@ static void __init prcm_setup_regs(void)
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+	prm_write_mod_reg(omap3630_en_uart4_mask |
+			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
 			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
 			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
 			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
 			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+	prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+			  OMAP3430_GRPSEL_GPIO2_MASK |
 			  OMAP3430_GRPSEL_GPIO3_MASK |
 			  OMAP3430_GRPSEL_GPIO4_MASK |
 			  OMAP3430_GRPSEL_GPIO5_MASK |

arch/arm/mach-omap2/prcm-common.h

@@ -425,6 +425,8 @@
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3630_ST_UART4_SHIFT				18
+#define OMAP3630_ST_UART4_MASK				(1 << 18)
 #define OMAP3430_ST_GPIO6_SHIFT				17
 #define OMAP3430_ST_GPIO6_MASK				(1 << 17)
 #define OMAP3430_ST_GPIO5_SHIFT				16

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -122,6 +122,7 @@
 #define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
 
 /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
 #define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)