Merge tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.6-rc3, along with the
  removal of an unused/unneeded driver as well.

  The android vsoc driver is not needed anymore by anyone, so it was
  removed.

  The other driver fixes are:
   - ashmem bugfixes
   - greybus audio driver bugfix
   - wireless driver bugfixes and tiny cleanups to error paths

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: Remove unneeded goto statements
  staging: rtl8188eu: Remove some unneeded goto statements
  staging: rtl8723bs: Fix potential overuse of kernel memory
  staging: rtl8188eu: Fix potential overuse of kernel memory
  staging: rtl8723bs: Fix potential security hole
  staging: rtl8188eu: Fix potential security hole
  staging: greybus: use after free in gb_audio_manager_remove_all()
  staging: android: Delete the 'vsoc' driver
  staging: rtl8723bs: fix copy of overlapping memory
  staging: android: ashmem: Disallow ashmem memory from being remapped
  staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.

drivers/staging/android/Kconfig

@@ -14,14 +14,6 @@ config ASHMEM
 	  It is, in theory, a good memory allocator for low-memory devices,
 	  because it can discard shared memory units when under memory pressure.
 
-config ANDROID_VSOC
-	tristate "Android Virtual SoC support"
-	depends on PCI_MSI
-	help
-	  This option adds support for the Virtual SoC driver needed to boot
-	  a 'cuttlefish' Android image inside QEmu. The driver interacts with
-	  a QEmu ivshmem device. If built as a module, it will be called vsoc.
-
 source "drivers/staging/android/ion/Kconfig"
 
 endif # if ANDROID

drivers/staging/android/Makefile

@@ -4,4 +4,3 @@ ccflags-y += -I$(src)			# needed for trace events
 obj-y					+= ion/
 
 obj-$(CONFIG_ASHMEM)			+= ashmem.o
-obj-$(CONFIG_ANDROID_VSOC)		+= vsoc.o

drivers/staging/android/TODO

@@ -9,14 +9,5 @@ ion/
  - Split /dev/ion up into multiple nodes (e.g. /dev/ion/heap0)
  - Better test framework (integration with VGEM was suggested)
 
-vsoc.c, uapi/vsoc_shm.h
- - The current driver uses the same wait queue for all of the futexes in a
-   region. This will cause false wakeups in regions with a large number of
-   waiting threads. We should eventually use multiple queues and select the
-   queue based on the region.
- - Add debugfs support for examining the permissions of regions.
- - Remove VSOC_WAIT_FOR_INCOMING_INTERRUPT ioctl. This functionality has been
-   superseded by the futex and is there for legacy reasons.
-
 Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Cc:
 Arve Hjønnevåg <arve@android.com> and Riley Andrews <riandrews@android.com>

drivers/staging/android/ashmem.c

@@ -351,8 +351,23 @@ static inline vm_flags_t calc_vm_may_flags(unsigned long prot)
 	       _calc_vm_trans(prot, PROT_EXEC,  VM_MAYEXEC);
 }
 
+static int ashmem_vmfile_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	/* do not allow to mmap ashmem backing shmem file directly */
+	return -EPERM;
+}
+
+static unsigned long
+ashmem_vmfile_get_unmapped_area(struct file *file, unsigned long addr,
+				unsigned long len, unsigned long pgoff,
+				unsigned long flags)
+{
+	return current->mm->get_unmapped_area(file, addr, len, pgoff, flags);
+}
+
 static int ashmem_mmap(struct file *file, struct vm_area_struct *vma)
 {
+	static struct file_operations vmfile_fops;
 	struct ashmem_area *asma = file->private_data;
 	int ret = 0;
 
@@ -393,6 +408,19 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma)
 		}
 		vmfile->f_mode |= FMODE_LSEEK;
 		asma->file = vmfile;
+		/*
+		 * override mmap operation of the vmfile so that it can't be
+		 * remapped which would lead to creation of a new vma with no
+		 * asma permission checks. Have to override get_unmapped_area
+		 * as well to prevent VM_BUG_ON check for f_ops modification.
+		 */
+		if (!vmfile_fops.mmap) {
+			vmfile_fops = *vmfile->f_op;
+			vmfile_fops.mmap = ashmem_vmfile_mmap;
+			vmfile_fops.get_unmapped_area =
+					ashmem_vmfile_get_unmapped_area;
+		}
+		vmfile->f_op = &vmfile_fops;
 	}
 	get_file(asma->file);
 

drivers/staging/android/uapi/vsoc_shm.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2017 Google, Inc.
- *
- */
-
-#ifndef _UAPI_LINUX_VSOC_SHM_H
-#define _UAPI_LINUX_VSOC_SHM_H
-
-#include <linux/types.h>
-
-/**
- * A permission is a token that permits a receiver to read and/or write an area
- * of memory within a Vsoc region.
- *
- * An fd_scoped permission grants both read and write access, and can be
- * attached to a file description (see open(2)).
- * Ownership of the area can then be shared by passing a file descriptor
- * among processes.
- *
- * begin_offset and end_offset define the area of memory that is controlled by
- * the permission. owner_offset points to a word, also in shared memory, that
- * controls ownership of the area.
- *
- * ownership of the region expires when the associated file description is
- * released.
- *
- * At most one permission can be attached to each file description.
- *
- * This is useful when implementing HALs like gralloc that scope and pass
- * ownership of shared resources via file descriptors.
- *
- * The caller is responsibe for doing any fencing.
- *
- * The calling process will normally identify a currently free area of
- * memory. It will construct a proposed fd_scoped_permission_arg structure:
- *
- *   begin_offset and end_offset describe the area being claimed
- *
- *   owner_offset points to the location in shared memory that indicates the
- *   owner of the area.
- *
- *   owned_value is the value that will be stored in owner_offset iff the
- *   permission can be granted. It must be different than VSOC_REGION_FREE.
- *
- * Two fd_scoped_permission structures are compatible if they vary only by
- * their owned_value fields.
- *
- * The driver ensures that, for any group of simultaneous callers proposing
- * compatible fd_scoped_permissions, it will accept exactly one of the
- * propopsals. The other callers will get a failure with errno of EAGAIN.
- *
- * A process receiving a file descriptor can identify the region being
- * granted using the VSOC_GET_FD_SCOPED_PERMISSION ioctl.
- */
-struct fd_scoped_permission {
-	__u32 begin_offset;
-	__u32 end_offset;
-	__u32 owner_offset;
-	__u32 owned_value;
-};
-
-/*
- * This value represents a free area of memory. The driver expects to see this
- * value at owner_offset when creating a permission otherwise it will not do it,
- * and will write this value back once the permission is no longer needed.
- */
-#define VSOC_REGION_FREE ((__u32)0)
-
-/**
- * ioctl argument for VSOC_CREATE_FD_SCOPE_PERMISSION
- */
-struct fd_scoped_permission_arg {
-	struct fd_scoped_permission perm;
-	__s32 managed_region_fd;
-};
-
-#define VSOC_NODE_FREE ((__u32)0)
-
-/*
- * Describes a signal table in shared memory. Each non-zero entry in the
- * table indicates that the receiver should signal the futex at the given
- * offset. Offsets are relative to the region, not the shared memory window.
- *
- * interrupt_signalled_offset is used to reliably signal interrupts across the
- * vmm boundary. There are two roles: transmitter and receiver. For example,
- * in the host_to_guest_signal_table the host is the transmitter and the
- * guest is the receiver. The protocol is as follows:
- *
- * 1. The transmitter should convert the offset of the futex to an offset
- *    in the signal table [0, (1 << num_nodes_lg2))
- *    The transmitter can choose any appropriate hashing algorithm, including
- *    hash = futex_offset & ((1 << num_nodes_lg2) - 1)
- *
- * 3. The transmitter should atomically compare and swap futex_offset with 0
- *    at hash. There are 3 possible outcomes
- *      a. The swap fails because the futex_offset is already in the table.
- *         The transmitter should stop.
- *      b. Some other offset is in the table. This is a hash collision. The
- *         transmitter should move to another table slot and try again. One
- *         possible algorithm:
- *         hash = (hash + 1) & ((1 << num_nodes_lg2) - 1)
- *      c. The swap worked. Continue below.
- *
- * 3. The transmitter atomically swaps 1 with the value at the
- *    interrupt_signalled_offset. There are two outcomes:
- *      a. The prior value was 1. In this case an interrupt has already been
- *         posted. The transmitter is done.
- *      b. The prior value was 0, indicating that the receiver may be sleeping.
- *         The transmitter will issue an interrupt.
- *
- * 4. On waking the receiver immediately exchanges a 0 with the
- *    interrupt_signalled_offset. If it receives a 0 then this a spurious
- *    interrupt. That may occasionally happen in the current protocol, but
- *    should be rare.
- *
- * 5. The receiver scans the signal table by atomicaly exchanging 0 at each
- *    location. If a non-zero offset is returned from the exchange the
- *    receiver wakes all sleepers at the given offset:
- *      futex((int*)(region_base + old_value), FUTEX_WAKE, MAX_INT);
- *
- * 6. The receiver thread then does a conditional wait, waking immediately
- *    if the value at interrupt_signalled_offset is non-zero. This catches cases
- *    here additional  signals were posted while the table was being scanned.
- *    On the guest the wait is handled via the VSOC_WAIT_FOR_INCOMING_INTERRUPT
- *    ioctl.
- */
-struct vsoc_signal_table_layout {
-	/* log_2(Number of signal table entries) */
-	__u32 num_nodes_lg2;
-	/*
-	 * Offset to the first signal table entry relative to the start of the
-	 * region
-	 */
-	__u32 futex_uaddr_table_offset;
-	/*
-	 * Offset to an atomic_t / atomic uint32_t. A non-zero value indicates
-	 * that one or more offsets are currently posted in the table.
-	 * semi-unique access to an entry in the table
-	 */
-	__u32 interrupt_signalled_offset;
-};
-
-#define VSOC_REGION_WHOLE ((__s32)0)
-#define VSOC_DEVICE_NAME_SZ 16
-
-/**
- * Each HAL would (usually) talk to a single device region
- * Mulitple entities care about these regions:
- * - The ivshmem_server will populate the regions in shared memory
- * - The guest kernel will read the region, create minor device nodes, and
- *   allow interested parties to register for FUTEX_WAKE events in the region
- * - HALs will access via the minor device nodes published by the guest kernel
- * - Host side processes will access the region via the ivshmem_server:
- *   1. Pass name to ivshmem_server at a UNIX socket
- *   2. ivshmemserver will reply with 2 fds:
- *     - host->guest doorbell fd
- *     - guest->host doorbell fd
- *     - fd for the shared memory region
- *     - region offset
- *   3. Start a futex receiver thread on the doorbell fd pointed at the
- *      signal_nodes
- */
-struct vsoc_device_region {
-	__u16 current_version;
-	__u16 min_compatible_version;
-	__u32 region_begin_offset;
-	__u32 region_end_offset;
-	__u32 offset_of_region_data;
-	struct vsoc_signal_table_layout guest_to_host_signal_table;
-	struct vsoc_signal_table_layout host_to_guest_signal_table;
-	/* Name of the device. Must always be terminated with a '\0', so
-	 * the longest supported device name is 15 characters.
-	 */
-	char device_name[VSOC_DEVICE_NAME_SZ];
-	/* There are two ways that permissions to access regions are handled:
-	 *   - When subdivided_by is VSOC_REGION_WHOLE, any process that can
-	 *     open the device node for the region gains complete access to it.
-	 *   - When subdivided is set processes that open the region cannot
-	 *     access it. Access to a sub-region must be established by invoking
-	 *     the VSOC_CREATE_FD_SCOPE_PERMISSION ioctl on the region
-	 *     referenced in subdivided_by, providing a fileinstance
-	 *     (represented by a fd) opened on this region.
-	 */
-	__u32 managed_by;
-};
-
-/*
- * The vsoc layout descriptor.
- * The first 4K should be reserved for the shm header and region descriptors.
- * The regions should be page aligned.
- */
-
-struct vsoc_shm_layout_descriptor {
-	__u16 major_version;
-	__u16 minor_version;
-
-	/* size of the shm. This may be redundant but nice to have */
-	__u32 size;
-
-	/* number of shared memory regions */
-	__u32 region_count;
-
-	/* The offset to the start of region descriptors */
-	__u32 vsoc_region_desc_offset;
-};
-
-/*
- * This specifies the current version that should be stored in
- * vsoc_shm_layout_descriptor.major_version and
- * vsoc_shm_layout_descriptor.minor_version.
- * It should be updated only if the vsoc_device_region and
- * vsoc_shm_layout_descriptor structures have changed.
- * Versioning within each region is transferred
- * via the min_compatible_version and current_version fields in
- * vsoc_device_region. The driver does not consult these fields: they are left
- * for the HALs and host processes and will change independently of the layout
- * version.
- */
-#define CURRENT_VSOC_LAYOUT_MAJOR_VERSION 2
-#define CURRENT_VSOC_LAYOUT_MINOR_VERSION 0
-
-#define VSOC_CREATE_FD_SCOPED_PERMISSION \
-	_IOW(0xF5, 0, struct fd_scoped_permission)
-#define VSOC_GET_FD_SCOPED_PERMISSION _IOR(0xF5, 1, struct fd_scoped_permission)
-
-/*
- * This is used to signal the host to scan the guest_to_host_signal_table
- * for new futexes to wake. This sends an interrupt if one is not already
- * in flight.
- */
-#define VSOC_MAYBE_SEND_INTERRUPT_TO_HOST _IO(0xF5, 2)
-
-/*
- * When this returns the guest will scan host_to_guest_signal_table to
- * check for new futexes to wake.
- */
-/* TODO(ghartman): Consider moving this to the bottom half */
-#define VSOC_WAIT_FOR_INCOMING_INTERRUPT _IO(0xF5, 3)
-
-/*
- * Guest HALs will use this to retrieve the region description after
- * opening their device node.
- */
-#define VSOC_DESCRIBE_REGION _IOR(0xF5, 4, struct vsoc_device_region)
-
-/*
- * Wake any threads that may be waiting for a host interrupt on this region.
- * This is mostly used during shutdown.
- */
-#define VSOC_SELF_INTERRUPT _IO(0xF5, 5)
-
-/*
- * This is used to signal the host to scan the guest_to_host_signal_table
- * for new futexes to wake. This sends an interrupt unconditionally.
- */
-#define VSOC_SEND_INTERRUPT_TO_HOST _IO(0xF5, 6)
-
-enum wait_types {
-	VSOC_WAIT_UNDEFINED = 0,
-	VSOC_WAIT_IF_EQUAL = 1,
-	VSOC_WAIT_IF_EQUAL_TIMEOUT = 2
-};
-
-/*
- * Wait for a condition to be true
- *
- * Note, this is sized and aligned so the 32 bit and 64 bit layouts are
- * identical.
- */
-struct vsoc_cond_wait {
-	/* Input: Offset of the 32 bit word to check */
-	__u32 offset;
-	/* Input: Value that will be compared with the offset */
-	__u32 value;
-	/* Monotonic time to wake at in seconds */
-	__u64 wake_time_sec;
-	/* Input: Monotonic time to wait in nanoseconds */
-	__u32 wake_time_nsec;
-	/* Input: Type of wait */
-	__u32 wait_type;
-	/* Output: Number of times the thread woke before returning. */
-	__u32 wakes;
-	/* Ensure that we're 8-byte aligned and 8 byte length for 32/64 bit
-	 * compatibility.
-	 */
-	__u32 reserved_1;
-};
-
-#define VSOC_COND_WAIT _IOWR(0xF5, 7, struct vsoc_cond_wait)
-
-/* Wake any local threads waiting at the offset given in arg */
-#define VSOC_COND_WAKE _IO(0xF5, 8)
-
-#endif /* _UAPI_LINUX_VSOC_SHM_H */

drivers/staging/greybus/audio_manager.c

@@ -92,8 +92,8 @@ void gb_audio_manager_remove_all(void)
 
 	list_for_each_entry_safe(module, next, &modules_list, list) {
 		list_del(&module->list);
-		kobject_put(&module->kobj);
 		ida_simple_remove(&module_id, module->id);
+		kobject_put(&module->kobj);
 	}
 
 	is_empty = list_empty(&modules_list);

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c

@@ -2009,21 +2009,16 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
 	struct ieee_param *param;
 	uint ret = 0;
 
-	if (p->length < sizeof(struct ieee_param) || !p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!p->pointer || p->length != sizeof(struct ieee_param))
+		return -EINVAL;
 
 	param = (struct ieee_param *)rtw_malloc(p->length);
-	if (!param) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!param)
+		return -ENOMEM;
 
 	if (copy_from_user(param, p->pointer, p->length)) {
 		kfree(param);
-		ret = -EFAULT;
-		goto out;
+		return -EFAULT;
 	}
 
 	switch (param->cmd) {
@@ -2054,9 +2049,6 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
 		ret = -EFAULT;
 
 	kfree(param);
-
-out:
-
 	return ret;
 }
 
@@ -2791,26 +2783,19 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	* so, we just check hw_init_completed
 	*/
 
-	if (!padapter->hw_init_completed) {
-		ret = -EPERM;
-		goto out;
-	}
+	if (!padapter->hw_init_completed)
+		return -EPERM;
 
-	if (!p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!p->pointer || p->length != sizeof(struct ieee_param))
+		return -EINVAL;
 
 	param = (struct ieee_param *)rtw_malloc(p->length);
-	if (!param) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!param)
+		return -ENOMEM;
 
 	if (copy_from_user(param, p->pointer, p->length)) {
 		kfree(param);
-		ret = -EFAULT;
-		goto out;
+		return -EFAULT;
 	}
 
 	switch (param->cmd) {
@@ -2865,7 +2850,6 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
 		ret = -EFAULT;
 	kfree(param);
-out:
 	return ret;
 }
 #endif

drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c

@@ -476,14 +476,13 @@ int rtl8723bs_xmit_thread(void *context)
 	s32 ret;
 	struct adapter *padapter;
 	struct xmit_priv *pxmitpriv;
-	u8 thread_name[20] = "RTWHALXT";
-
+	u8 thread_name[20];
 
 	ret = _SUCCESS;
 	padapter = context;
 	pxmitpriv = &padapter->xmitpriv;
 
-	rtw_sprintf(thread_name, 20, "%s-"ADPT_FMT, thread_name, ADPT_ARG(padapter));
+	rtw_sprintf(thread_name, 20, "RTWHALXT-" ADPT_FMT, ADPT_ARG(padapter));
 	thread_enter(thread_name);
 
 	DBG_871X("start "FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));

drivers/staging/rtl8723bs/os_dep/ioctl_linux.c

@@ -3373,21 +3373,16 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
 
 	/* down(&ieee->wx_sem); */
 
-	if (p->length < sizeof(struct ieee_param) || !p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!p->pointer || p->length != sizeof(struct ieee_param))
+		return -EINVAL;
 
 	param = rtw_malloc(p->length);
-	if (param == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (param == NULL)
+		return -ENOMEM;
 
 	if (copy_from_user(param, p->pointer, p->length)) {
 		kfree(param);
-		ret = -EFAULT;
-		goto out;
+		return -EFAULT;
 	}
 
 	switch (param->cmd) {
@@ -3421,12 +3416,8 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
 
 	kfree(param);
 
-out:
-
 	/* up(&ieee->wx_sem); */
-
 	return ret;
-
 }
 
 static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len)
@@ -4200,28 +4191,19 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	* so, we just check hw_init_completed
 	*/
 
-	if (!padapter->hw_init_completed) {
-		ret = -EPERM;
-		goto out;
-	}
-
+	if (!padapter->hw_init_completed)
+		return -EPERM;
 
-	/* if (p->length < sizeof(struct ieee_param) || !p->pointer) { */
-	if (!p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!p->pointer || p->length != sizeof(*param))
+		return -EINVAL;
 
 	param = rtw_malloc(p->length);
-	if (param == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (param == NULL)
+		return -ENOMEM;
 
 	if (copy_from_user(param, p->pointer, p->length)) {
 		kfree(param);
-		ret = -EFAULT;
-		goto out;
+		return -EFAULT;
 	}
 
 	/* DBG_871X("%s, cmd =%d\n", __func__, param->cmd); */
@@ -4321,13 +4303,8 @@ static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
 	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
 		ret = -EFAULT;
 
-
 	kfree(param);
-
-out:
-
 	return ret;
-
 }
 
 static int rtw_wx_set_priv(struct net_device *dev,

drivers/staging/vt6656/dpc.c

@@ -98,7 +98,7 @@ int vnt_rx_data(struct vnt_private *priv, struct vnt_rcb *ptr_rcb,
 
 	vnt_rf_rssi_to_dbm(priv, tail->rssi, &rx_dbm);
 
-	priv->bb_pre_ed_rssi = (u8)rx_dbm + 1;
+	priv->bb_pre_ed_rssi = (u8)-rx_dbm + 1;
 	priv->current_rssi = priv->bb_pre_ed_rssi;
 
 	skb_pull(skb, sizeof(*head));