Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull second set of arm64 updates from Catalin Marinas:
 "A second pull request for this merging window, mainly with fixes and
  docs clarification:

   - Documentation clarification on CPU topology and booting
     requirements
   - Additional cache flushing during boot (needed in the presence of
     external caches or under virtualisation)
   - DMA range invalidation fix for non cache line aligned buffers
   - Build failure fix with !COMPAT
   - Kconfig update for STRICT_DEVMEM"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix DMA range invalidation for cache line unaligned buffers
  arm64: Add missing Kconfig for CONFIG_STRICT_DEVMEM
  arm64: fix !CONFIG_COMPAT build failures
  Revert "arm64: virt: ensure visibility of __boot_cpu_mode"
  arm64: Relax the kernel cache requirements for boot
  arm64: Update the TCR_EL1 translation granule definitions for 16K pages
  ARM: topology: Make it clear that all CPUs need to be described

Documentation/arm64/booting.txt

@@ -111,8 +111,14 @@ Before jumping into the kernel, the following conditions must be met:
 - Caches, MMUs
   The MMU must be off.
   Instruction cache may be on or off.
-  Data cache must be off and invalidated.
-  External caches (if present) must be configured and disabled.
+  The address range corresponding to the loaded kernel image must be
+  cleaned to the PoC. In the presence of a system cache or other
+  coherent masters with caches enabled, this will typically require
+  cache maintenance by VA rather than set/way operations.
+  System caches which respect the architected cache maintenance by VA
+  operations must be configured and may be enabled.
+  System caches which do not respect architected cache maintenance by VA
+  operations (not recommended) must be configured and disabled.
 
 - Architected timers
   CNTFRQ must be programmed with the timer frequency and CNTVOFF must

Documentation/devicetree/bindings/arm/topology.txt

@@ -75,9 +75,10 @@ The cpu-map node can only contain three types of child nodes:
 
 whose bindings are described in paragraph 3.
 
-The nodes describing the CPU topology (cluster/core/thread) can only be
-defined within the cpu-map node.
-Any other configuration is consider invalid and therefore must be ignored.
+The nodes describing the CPU topology (cluster/core/thread) can only
+be defined within the cpu-map node and every core/thread in the system
+must be defined within the topology.  Any other configuration is
+invalid and therefore must be ignored.
 
 ===========================================
 2.1 - cpu-map child nodes naming convention

arch/arm64/Kconfig.debug

@@ -6,6 +6,20 @@ config FRAME_POINTER
 	bool
 	default y
 
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU
+	help
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to memory mapped peripherals.
+
+	  If in doubt, say Y.
+
 config EARLY_PRINTK
 	bool "Early printk support"
 	default y

arch/arm64/include/asm/pgtable-hwdef.h

@@ -120,8 +120,12 @@
 #define TCR_ORGN_WBnWA		((UL(3) << 10) | (UL(3) << 26))
 #define TCR_ORGN_MASK		((UL(3) << 10) | (UL(3) << 26))
 #define TCR_SHARED		((UL(3) << 12) | (UL(3) << 28))
+#define TCR_TG0_4K		(UL(0) << 14)
 #define TCR_TG0_64K		(UL(1) << 14)
-#define TCR_TG1_64K		(UL(1) << 30)
+#define TCR_TG0_16K		(UL(2) << 14)
+#define TCR_TG1_16K		(UL(1) << 30)
+#define TCR_TG1_4K		(UL(2) << 30)
+#define TCR_TG1_64K		(UL(3) << 30)
 #define TCR_ASID16		(UL(1) << 36)
 #define TCR_TBI0		(UL(1) << 37)
 

arch/arm64/include/asm/virt.h

@@ -22,7 +22,6 @@
 #define BOOT_CPU_MODE_EL2	(0xe12)
 
 #ifndef __ASSEMBLY__
-#include <asm/cacheflush.h>
 
 /*
  * __boot_cpu_mode records what mode CPUs were booted in.
@@ -38,20 +37,9 @@ extern u32 __boot_cpu_mode[2];
 void __hyp_set_vectors(phys_addr_t phys_vector_base);
 phys_addr_t __hyp_get_vectors(void);
 
-static inline void sync_boot_mode(void)
-{
-	/*
-	 * As secondaries write to __boot_cpu_mode with caches disabled, we
-	 * must flush the corresponding cache entries to ensure the visibility
-	 * of their writes.
-	 */
-	__flush_dcache_area(__boot_cpu_mode, sizeof(__boot_cpu_mode));
-}
-
 /* Reports the availability of HYP mode */
 static inline bool is_hyp_mode_available(void)
 {
-	sync_boot_mode();
 	return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 &&
 		__boot_cpu_mode[1] == BOOT_CPU_MODE_EL2);
 }
@@ -59,7 +47,6 @@ static inline bool is_hyp_mode_available(void)
 /* Check if the bootloader has booted CPUs in different modes */
 static inline bool is_hyp_mode_mismatched(void)
 {
-	sync_boot_mode();
 	return __boot_cpu_mode[0] != __boot_cpu_mode[1];
 }
 

arch/arm64/kernel/head.S

@@ -26,6 +26,7 @@
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 #include <asm/cputype.h>
 #include <asm/memory.h>
 #include <asm/thread_info.h>
@@ -229,7 +230,11 @@ ENTRY(set_cpu_boot_mode_flag)
 	cmp	w20, #BOOT_CPU_MODE_EL2
 	b.ne	1f
 	add	x1, x1, #4
-1:	str	w20, [x1]			// This CPU has booted in EL1
+1:	dc	cvac, x1			// Clean potentially dirty cache line
+	dsb	sy
+	str	w20, [x1]			// This CPU has booted in EL1
+	dc	civac, x1			// Clean&invalidate potentially stale cache line
+	dsb	sy
 	ret
 ENDPROC(set_cpu_boot_mode_flag)
 
@@ -240,8 +245,9 @@ ENDPROC(set_cpu_boot_mode_flag)
  * This is not in .bss, because we set it sufficiently early that the boot-time
  * zeroing of .bss would clobber it.
  */
-	.pushsection	.data
+	.pushsection	.data..cacheline_aligned
 ENTRY(__boot_cpu_mode)
+	.align	L1_CACHE_SHIFT
 	.long	BOOT_CPU_MODE_EL2
 	.long	0
 	.popsection
@@ -408,6 +414,15 @@ ENDPROC(__calc_phys_offset)
  */
 __create_page_tables:
 	pgtbl	x25, x26, x24			// idmap_pg_dir and swapper_pg_dir addresses
+	mov	x27, lr
+
+	/*
+	 * Invalidate the idmap and swapper page tables to avoid potential
+	 * dirty cache lines being evicted.
+	 */
+	mov	x0, x25
+	add	x1, x26, #SWAPPER_DIR_SIZE
+	bl	__inval_cache_range
 
 	/*
 	 * Clear the idmap and swapper page tables.
@@ -467,6 +482,17 @@ __create_page_tables:
 	ldr	x5, =FIXADDR_TOP		// Fixed mapping virtual address
 	add	x0, x26, #2 * PAGE_SIZE		// section table address
 	create_pgd_entry x26, x0, x5, x6, x7
+
+	/*
+	 * Since the page tables have been populated with non-cacheable
+	 * accesses (MMU disabled), invalidate the idmap and swapper page
+	 * tables again to remove any speculatively loaded cache lines.
+	 */
+	mov	x0, x25
+	add	x1, x26, #SWAPPER_DIR_SIZE
+	bl	__inval_cache_range
+
+	mov	lr, x27
 	ret
 ENDPROC(__create_page_tables)
 	.ltorg

arch/arm64/kernel/perf_event.c

@@ -1386,6 +1386,7 @@ user_backtrace(struct frame_tail __user *tail,
 	return buftail.fp;
 }
 
+#ifdef CONFIG_COMPAT
 /*
  * The registers we're interested in are at the end of the variable
  * length saved register structure. The fp points at the end of this
@@ -1430,6 +1431,7 @@ compat_user_backtrace(struct compat_frame_tail __user *tail,
 
 	return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1;
 }
+#endif /* CONFIG_COMPAT */
 
 void perf_callchain_user(struct perf_callchain_entry *entry,
 			 struct pt_regs *regs)
@@ -1451,6 +1453,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry,
 		       tail && !((unsigned long)tail & 0xf))
 			tail = user_backtrace(tail, entry);
 	} else {
+#ifdef CONFIG_COMPAT
 		/* AARCH32 compat mode */
 		struct compat_frame_tail __user *tail;
 
@@ -1459,6 +1462,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry,
 		while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
 			tail && !((unsigned long)tail & 0x3))
 			tail = compat_user_backtrace(tail, entry);
+#endif
 	}
 }
 

arch/arm64/kernel/perf_regs.c

@@ -2,6 +2,8 @@
 #include <linux/kernel.h>
 #include <linux/perf_event.h>
 #include <linux/bug.h>
+
+#include <asm/compat.h>
 #include <asm/perf_regs.h>
 #include <asm/ptrace.h>
 

arch/arm64/mm/cache.S

@@ -167,6 +167,14 @@ ENTRY(__flush_dcache_area)
 	ret
 ENDPROC(__flush_dcache_area)
 
+/*
+ *	__inval_cache_range(start, end)
+ *	- start   - start address of region
+ *	- end     - end address of region
+ */
+ENTRY(__inval_cache_range)
+	/* FALLTHROUGH */
+
 /*
  *	__dma_inv_range(start, end)
  *	- start   - virtual start address of region
@@ -175,14 +183,22 @@ ENDPROC(__flush_dcache_area)
 __dma_inv_range:
 	dcache_line_size x2, x3
 	sub	x3, x2, #1
-	bic	x0, x0, x3
+	tst	x1, x3				// end cache line aligned?
 	bic	x1, x1, x3
-1:	dc	ivac, x0			// invalidate D / U line
-	add	x0, x0, x2
+	b.eq	1f
+	dc	civac, x1			// clean & invalidate D / U line
+1:	tst	x0, x3				// start cache line aligned?
+	bic	x0, x0, x3
+	b.eq	2f
+	dc	civac, x0			// clean & invalidate D / U line
+	b	3f
+2:	dc	ivac, x0			// invalidate D / U line
+3:	add	x0, x0, x2
 	cmp	x0, x1
-	b.lo	1b
+	b.lo	2b
 	dsb	sy
 	ret
+ENDPROC(__inval_cache_range)
 ENDPROC(__dma_inv_range)
 
 /*

arch/arm64/mm/proc.S

@@ -28,14 +28,21 @@
 
 #include "proc-macros.S"
 
-#ifndef CONFIG_SMP
-/* PTWs cacheable, inner/outer WBWA not shareable */
-#define TCR_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA
+#ifdef CONFIG_ARM64_64K_PAGES
+#define TCR_TG_FLAGS	TCR_TG0_64K | TCR_TG1_64K
+#else
+#define TCR_TG_FLAGS	TCR_TG0_4K | TCR_TG1_4K
+#endif
+
+#ifdef CONFIG_SMP
+#define TCR_SMP_FLAGS	TCR_SHARED
 #else
-/* PTWs cacheable, inner/outer WBWA shareable */
-#define TCR_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA | TCR_SHARED
+#define TCR_SMP_FLAGS	0
 #endif
 
+/* PTWs cacheable, inner/outer WBWA */
+#define TCR_CACHE_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA
+
 #define MAIR(attr, mt)	((attr) << ((mt) * 8))
 
 /*
@@ -209,18 +216,14 @@ ENTRY(__cpu_setup)
 	 * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
 	 * both user and kernel.
 	 */
-	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | \
-		      TCR_ASID16 | TCR_TBI0 | (1 << 31)
+	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
+			TCR_TG_FLAGS | TCR_ASID16 | TCR_TBI0
 	/*
 	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the IPS bits in
 	 * TCR_EL1.
 	 */
 	mrs	x9, ID_AA64MMFR0_EL1
 	bfi	x10, x9, #32, #3
-#ifdef CONFIG_ARM64_64K_PAGES
-	orr	x10, x10, TCR_TG0_64K
-	orr	x10, x10, TCR_TG1_64K
-#endif
 	msr	tcr_el1, x10
 	ret					// return to head.S
 ENDPROC(__cpu_setup)