提交 e4ea9333 编写于 作者: S Shawn Guo 提交者: Grant Likely

gpio/mxc: convert gpio-mxc to use generic irq chip

The patch converts gpio-mxc driver to use generic irq chip.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
上级 c103de24
......@@ -96,6 +96,7 @@ config GPIO_MXC
def_bool y
depends on ARCH_MXC
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
config GPIO_MXS
def_bool y
......
......@@ -65,46 +65,11 @@ static LIST_HEAD(mxc_gpio_ports);
/* Note: This driver assumes 32 GPIOs are handled in one register */
static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
{
writel(1 << index, port->base + GPIO_ISR);
}
static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
int enable)
{
u32 l;
l = readl(port->base + GPIO_IMR);
l = (l & (~(1 << index))) | (!!enable << index);
writel(l, port->base + GPIO_IMR);
}
static void gpio_ack_irq(struct irq_data *d)
{
struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
u32 gpio = irq_to_gpio(d->irq);
_clear_gpio_irqstatus(port, gpio & 0x1f);
}
static void gpio_mask_irq(struct irq_data *d)
{
struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
u32 gpio = irq_to_gpio(d->irq);
_set_gpio_irqenable(port, gpio & 0x1f, 0);
}
static void gpio_unmask_irq(struct irq_data *d)
{
struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
u32 gpio = irq_to_gpio(d->irq);
_set_gpio_irqenable(port, gpio & 0x1f, 1);
}
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
u32 gpio = irq_to_gpio(d->irq);
struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 bit, val;
int edge;
void __iomem *reg = port->base;
......@@ -142,7 +107,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
bit = gpio & 0xf;
val = readl(reg) & ~(0x3 << (bit << 1));
writel(val | (edge << (bit << 1)), reg);
_clear_gpio_irqstatus(port, gpio & 0x1f);
writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
return 0;
}
......@@ -231,7 +196,8 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
u32 gpio = irq_to_gpio(d->irq);
u32 gpio_idx = gpio & 0x1F;
struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
......@@ -248,26 +214,33 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
return 0;
}
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
.irq_ack = gpio_ack_irq,
.irq_mask = gpio_mask_irq,
.irq_unmask = gpio_unmask_irq,
.irq_set_type = gpio_set_irq_type,
.irq_set_wake = gpio_set_wake_irq,
};
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
port->base, handle_level_irq);
gc->private = port;
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack,
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = gpio_set_irq_type;
ct->chip.irq_set_wake = gpio_set_wake_irq,
ct->regs.ack = GPIO_ISR;
ct->regs.mask = GPIO_IMR;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
}
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
{
struct mxc_gpio_port *port;
struct resource *iores;
int err, i;
int err;
port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
if (!port)
......@@ -304,13 +277,8 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);
for (i = port->virtual_irq_start;
i < port->virtual_irq_start + 32; i++) {
irq_set_lockdep_class(i, &gpio_lock_class);
irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
irq_set_chip_data(i, port);
}
/* gpio-mxc can be a generic irq chip */
mxc_gpio_init_gc(port);
if (cpu_is_mx2()) {
/* setup one handler for all GPIO interrupts */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册