提交 e3fa49ac 编写于 作者: A Alexandre Bailon 提交者: Vinod Koul

dmaengine: cppi41: Add support of DA8xx to CPPI 4.1

The DA8xx has a CPPI 4.1 DMA controller.
This is add the glue layer required to make it work on DA8xx.
Signed-off-by: NAlexandre Bailon <abailon@baylibre.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 d567206e
......@@ -514,12 +514,12 @@ config TIMB_DMA
Enable support for the Timberdale FPGA DMA engine.
config TI_CPPI41
tristate "AM33xx CPPI41 DMA support"
depends on ARCH_OMAP
tristate "CPPI 4.1 DMA support"
depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
select DMA_ENGINE
help
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
is currently used by the USB driver on AM335x platforms.
is currently used by the USB driver on AM335x and DA8xx platforms.
config TI_DMA_CROSSBAR
bool
......
......@@ -223,6 +223,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
[29] = { .submit = 30, .complete = 155},
};
static const struct chan_queues da8xx_usb_queues_tx[] = {
[0] = { .submit = 16, .complete = 24},
[1] = { .submit = 18, .complete = 24},
[2] = { .submit = 20, .complete = 24},
[3] = { .submit = 22, .complete = 24},
};
static const struct chan_queues da8xx_usb_queues_rx[] = {
[0] = { .submit = 1, .complete = 26},
[1] = { .submit = 3, .complete = 26},
[2] = { .submit = 5, .complete = 26},
[3] = { .submit = 7, .complete = 26},
};
struct cppi_glue_infos {
const struct chan_queues *queues_rx;
const struct chan_queues *queues_tx;
......@@ -971,8 +985,17 @@ static const struct cppi_glue_infos am335x_usb_infos = {
.qmgr_num_pend = 5,
};
static const struct cppi_glue_infos da8xx_usb_infos = {
.queues_rx = da8xx_usb_queues_rx,
.queues_tx = da8xx_usb_queues_tx,
.td_queue = { .submit = 31, .complete = 0 },
.first_completion_queue = 24,
.qmgr_num_pend = 2,
};
static const struct of_device_id cppi41_dma_ids[] = {
{ .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
{ .compatible = "ti,da830-cppi41", .data = &da8xx_usb_infos},
{},
};
MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册