Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 e3ed8b43 编写于 作者: A Arnd Bergmann
浏览文件
操作

fbdev: remove blackfin drivers 

The blackfin architecture is getting removed, this removes the
associated fbdev drivers as well.
Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NAaron Wu <aaron.wu@analog.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
上级 8cbfbae8
展开全部 隐藏空白更改
内联 并排
Showing with 1 addition and 4445 deletion
drivers/video/fbdev/Kconfig
浏览文件 @ e3ed8b43
......@@ -580,109 +580,6 @@ config FB_VGA16
To compile this driver as a module, choose M here: the
module will be called vga16fb.
config FB_BF54X_LQ043
tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
depends on FB && (BF54x) && !BF542
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
config FB_BFIN_T350MCQB
tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
depends on FB && BLACKFIN
select BFIN_GPTIMERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
config FB_BFIN_LQ035Q1
tristate "SHARP LQ035Q1DH02 TFT LCD"
depends on FB && BLACKFIN && SPI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BFIN_GPTIMERS
help
This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
the Blackfin Landscape LCD EZ-Extender Card.
This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
To compile this driver as a module, choose M here: the
module will be called bfin-lq035q1-fb.
config FB_BF537_LQ035
tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BFIN_GPTIMERS
help
This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
attached to a BF537.
To compile this driver as a module, choose M here: the
module will be called bf537-lq035.
config FB_BFIN_7393
tristate "Blackfin ADV7393 Video encoder"
depends on FB && BLACKFIN
select I2C
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This is the framebuffer device for a ADV7393 video encoder
attached to a Blackfin on the PPI port.
If your Blackfin board has a ADV7393 select Y.
To compile this driver as a module, choose M here: the
module will be called bfin_adv7393fb.
choice
prompt "Video mode support"
depends on FB_BFIN_7393
default NTSC
config NTSC
bool 'NTSC 720x480'
config PAL
bool 'PAL 720x576'
config NTSC_640x480
bool 'NTSC 640x480 (Experimental)'
config PAL_640x480
bool 'PAL 640x480 (Experimental)'
config NTSC_YCBCR
bool 'NTSC 720x480 YCbCR input'
config PAL_YCBCR
bool 'PAL 720x576 YCbCR input'
endchoice
choice
prompt "Size of ADV7393 frame buffer memory Single/Double Size"
depends on (FB_BFIN_7393)
default ADV7393_1XMEM
config ADV7393_1XMEM
bool 'Single'
config ADV7393_2XMEM
bool 'Double'
endchoice
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
......
drivers/video/fbdev/Makefile
浏览文件 @ e3ed8b43
......@@ -136,11 +136,6 @@ obj-$(CONFIG_FB_VESA) += vesafb.o
obj-$(CONFIG_FB_EFI) += efifb.o
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
obj-$(CONFIG_FB_MX3) += mx3fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
obj-$(CONFIG_FB_MXS) += mxsfb.o
......
drivers/video/fbdev/bf537-lq035.c 已删除 100644 → 0
浏览文件 @ 8cbfbae8
此差异已折叠。
drivers/video/fbdev/bf54x-lq043fb.c 已删除 100644 → 0
浏览文件 @ 8cbfbae8
/*
* File: drivers/video/bf54x-lq043.c
* Based on:
* Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
*
* Created:
* Description: ADSP-BF54x Framebuffer driver
*
*
* Modified:
* Copyright 2007-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/device.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/blackfin.h>
#include <asm/irq.h>
#include <asm/dpmc.h>
#include <asm/dma-mapping.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <mach/bf54x-lq043.h>
#define NO_BL_SUPPORT
#define DRIVER_NAME "bf54x-lq043"
static char driver_name[] = DRIVER_NAME;
#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
#define EPPI0_18 {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, \
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, \
P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, P_PPI0_D16, P_PPI0_D17, 0}
#define EPPI0_24 {P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, 0}
struct bfin_bf54xfb_info {
struct fb_info *fb;
struct device *dev;
struct bfin_bf54xfb_mach_info *mach_info;
unsigned char *fb_buffer; /* RGB Buffer */
dma_addr_t dma_handle;
int lq043_open_cnt;
int irq;
spinlock_t lock; /* lock */
};
static int nocursor;
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
static int outp_rgb666;
module_param(outp_rgb666, int, 0);
MODULE_PARM_DESC(outp_rgb666, "Output 18-bit RGB666");
#define LCD_X_RES 480 /*Horizontal Resolution */
#define LCD_Y_RES 272 /* Vertical Resolution */
#define LCD_BPP 24 /* Bit Per Pixel */
#define DMA_BUS_SIZE 32
/* -- Horizontal synchronizing --
*
* Timing characteristics taken from the SHARP LQ043T1DG01 datasheet
* (LCY-W-06602A Page 9 of 22)
*
* Clock Frequency 1/Tc Min 7.83 Typ 9.00 Max 9.26 MHz
*
* Period TH - 525 - Clock
* Pulse width THp - 41 - Clock
* Horizontal period THd - 480 - Clock
* Back porch THb - 2 - Clock
* Front porch THf - 2 - Clock
*
* -- Vertical synchronizing --
* Period TV - 286 - Line
* Pulse width TVp - 10 - Line
* Vertical period TVd - 272 - Line
* Back porch TVb - 2 - Line
* Front porch TVf - 2 - Line
*/
#define LCD_CLK (8*1000*1000) /* 8MHz */
/* # active data to transfer after Horizontal Delay clock */
#define EPPI_HCOUNT LCD_X_RES
/* # active lines to transfer after Vertical Delay clock */
#define EPPI_VCOUNT LCD_Y_RES
/* Samples per Line = 480 (active data) + 45 (padding) */
#define EPPI_LINE 525
/* Lines per Frame = 272 (active data) + 14 (padding) */
#define EPPI_FRAME 286
/* FS1 (Hsync) Width (Typical)*/
#define EPPI_FS1W_HBL 41
/* FS1 (Hsync) Period (Typical) */
#define EPPI_FS1P_AVPL EPPI_LINE
/* Horizontal Delay clock after assertion of Hsync (Typical) */
#define EPPI_HDELAY 43
/* FS2 (Vsync) Width = FS1 (Hsync) Period * 10 */
#define EPPI_FS2W_LVB (EPPI_LINE * 10)
/* FS2 (Vsync) Period = FS1 (Hsync) Period * Lines per Frame */
#define EPPI_FS2P_LAVF (EPPI_LINE * EPPI_FRAME)
/* Vertical Delay after assertion of Vsync (2 Lines) */
#define EPPI_VDELAY 12
#define EPPI_CLIP 0xFF00FF00
/* EPPI Control register configuration value for RGB out
* - EPPI as Output
* GP 2 frame sync mode,
* Internal Clock generation disabled, Internal FS generation enabled,
* Receives samples on EPPI_CLK raising edge, Transmits samples on EPPI_CLK falling edge,
* FS1 & FS2 are active high,
* DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
* DMA Unpacking disabled when RGB Formating is enabled, otherwise DMA unpacking enabled
* Swapping Enabled,
* One (DMA) Channel Mode,
* RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
* Regular watermark - when FIFO is 100% full,
* Urgent watermark - when FIFO is 75% full
*/
#define EPPI_CONTROL (0x20136E2E | SWAPEN)
static inline u16 get_eppi_clkdiv(u32 target_ppi_clk)
{
u32 sclk = get_sclk();
/* EPPI_CLK = (SCLK) / (2 * (EPPI_CLKDIV[15:0] + 1)) */
return (((sclk / target_ppi_clk) / 2) - 1);
}
static void config_ppi(struct bfin_bf54xfb_info *fbi)
{
u16 eppi_clkdiv = get_eppi_clkdiv(LCD_CLK);
bfin_write_EPPI0_FS1W_HBL(EPPI_FS1W_HBL);
bfin_write_EPPI0_FS1P_AVPL(EPPI_FS1P_AVPL);
bfin_write_EPPI0_FS2W_LVB(EPPI_FS2W_LVB);
bfin_write_EPPI0_FS2P_LAVF(EPPI_FS2P_LAVF);
bfin_write_EPPI0_CLIP(EPPI_CLIP);
bfin_write_EPPI0_FRAME(EPPI_FRAME);
bfin_write_EPPI0_LINE(EPPI_LINE);
bfin_write_EPPI0_HCOUNT(EPPI_HCOUNT);
bfin_write_EPPI0_HDELAY(EPPI_HDELAY);
bfin_write_EPPI0_VCOUNT(EPPI_VCOUNT);
bfin_write_EPPI0_VDELAY(EPPI_VDELAY);
bfin_write_EPPI0_CLKDIV(eppi_clkdiv);
/*
* DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
* RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
*/
if (outp_rgb666)
bfin_write_EPPI0_CONTROL((EPPI_CONTROL & ~DLENGTH) | DLEN_18 |
RGB_FMT_EN);
else
bfin_write_EPPI0_CONTROL(((EPPI_CONTROL & ~DLENGTH) | DLEN_24) &
~RGB_FMT_EN);
}
static int config_dma(struct bfin_bf54xfb_info *fbi)
{
set_dma_config(CH_EPPI0,
set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
INTR_DISABLE, DIMENSION_2D,
DATA_SIZE_32,
DMA_NOSYNC_KEEP_DMA_BUF));
set_dma_x_count(CH_EPPI0, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
set_dma_x_modify(CH_EPPI0, DMA_BUS_SIZE / 8);
set_dma_y_count(CH_EPPI0, LCD_Y_RES);
set_dma_y_modify(CH_EPPI0, DMA_BUS_SIZE / 8);
set_dma_start_addr(CH_EPPI0, (unsigned long)fbi->fb_buffer);
return 0;
}
static int request_ports(struct bfin_bf54xfb_info *fbi)
{
u16 eppi_req_18[] = EPPI0_18;
u16 disp = fbi->mach_info->disp;
if (gpio_request_one(disp, GPIOF_OUT_INIT_HIGH, DRIVER_NAME)) {
printk(KERN_ERR "Requesting GPIO %d failed\n", disp);
return -EFAULT;
}
if (peripheral_request_list(eppi_req_18, DRIVER_NAME)) {
printk(KERN_ERR "Requesting Peripherals failed\n");
gpio_free(disp);
return -EFAULT;
}
if (!outp_rgb666) {
u16 eppi_req_24[] = EPPI0_24;
if (peripheral_request_list(eppi_req_24, DRIVER_NAME)) {
printk(KERN_ERR "Requesting Peripherals failed\n");
peripheral_free_list(eppi_req_18);
gpio_free(disp);
return -EFAULT;
}
}
return 0;
}
static void free_ports(struct bfin_bf54xfb_info *fbi)
{
u16 eppi_req_18[] = EPPI0_18;
gpio_free(fbi->mach_info->disp);
peripheral_free_list(eppi_req_18);
if (!outp_rgb666) {
u16 eppi_req_24[] = EPPI0_24;
peripheral_free_list(eppi_req_24);
}
}
static int bfin_bf54x_fb_open(struct fb_info *info, int user)
{
struct bfin_bf54xfb_info *fbi = info->par;
spin_lock(&fbi->lock);
fbi->lq043_open_cnt++;
if (fbi->lq043_open_cnt <= 1) {
bfin_write_EPPI0_CONTROL(0);
SSYNC();
config_dma(fbi);
config_ppi(fbi);
/* start dma */
enable_dma(CH_EPPI0);
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
}
spin_unlock(&fbi->lock);
return 0;
}
static int bfin_bf54x_fb_release(struct fb_info *info, int user)
{
struct bfin_bf54xfb_info *fbi = info->par;
spin_lock(&fbi->lock);
fbi->lq043_open_cnt--;
if (fbi->lq043_open_cnt <= 0) {
bfin_write_EPPI0_CONTROL(0);
SSYNC();
disable_dma(CH_EPPI0);
}
spin_unlock(&fbi->lock);
return 0;
}
static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
switch (var->bits_per_pixel) {
case 24:/* TRUECOLOUR, 16m */
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
var->red.length = var->green.length = var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
break;
default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
}
if (info->var.xres != var->xres || info->var.yres != var->yres ||
info->var.xres_virtual != var->xres_virtual ||
info->var.yres_virtual != var->yres_virtual) {
pr_debug("%s: Resolution not supported: X%u x Y%u \n",
__func__, var->xres, var->yres);
return -EINVAL;
}
/*
* Memory limit
*/
if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
__func__, var->yres_virtual);
return -ENOMEM;
}
return 0;
}
int bfin_bf54x_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
if (nocursor)
return 0;
else
return -EINVAL; /* just to force soft_cursor() call */
}
static int bfin_bf54x_fb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp,
struct fb_info *info)
{
if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
return -EINVAL;
if (info->var.grayscale) {
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
}
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
u32 value;
/* Place color in the pseudopalette */
if (regno > 16)
return -EINVAL;
red >>= (16 - info->var.red.length);
green >>= (16 - info->var.green.length);
blue >>= (16 - info->var.blue.length);
value = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset);
value &= 0xFFFFFF;
((u32 *) (info->pseudo_palette))[regno] = value;
}
return 0;
}
static struct fb_ops bfin_bf54x_fb_ops = {
.owner = THIS_MODULE,
.fb_open = bfin_bf54x_fb_open,
.fb_release = bfin_bf54x_fb_release,
.fb_check_var = bfin_bf54x_fb_check_var,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_cursor = bfin_bf54x_fb_cursor,
.fb_setcolreg = bfin_bf54x_fb_setcolreg,
};
#ifndef NO_BL_SUPPORT
static int bl_get_brightness(struct backlight_device *bd)
{
return 0;
}
static const struct backlight_ops bfin_lq043fb_bl_ops = {
.get_brightness = bl_get_brightness,
};
static struct backlight_device *bl_dev;
static int bfin_lcd_get_power(struct lcd_device *dev)
{
return 0;
}
static int bfin_lcd_set_power(struct lcd_device *dev, int power)
{
return 0;
}
static int bfin_lcd_get_contrast(struct lcd_device *dev)
{
return 0;
}
static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
{
return 0;
}
static int bfin_lcd_check_fb(struct lcd_device *dev, struct fb_info *fi)
{
if (!fi || (fi == &bfin_bf54x_fb))
return 1;
return 0;
}
static struct lcd_ops bfin_lcd_ops = {
.get_power = bfin_lcd_get_power,
.set_power = bfin_lcd_set_power,
.get_contrast = bfin_lcd_get_contrast,
.set_contrast = bfin_lcd_set_contrast,
.check_fb = bfin_lcd_check_fb,
};
static struct lcd_device *lcd_dev;
#endif
static irqreturn_t bfin_bf54x_irq_error(int irq, void *dev_id)
{
/*struct bfin_bf54xfb_info *info = dev_id;*/
u16 status = bfin_read_EPPI0_STATUS();
bfin_write_EPPI0_STATUS(0xFFFF);
if (status) {
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
disable_dma(CH_EPPI0);
/* start dma */
enable_dma(CH_EPPI0);
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
bfin_write_EPPI0_STATUS(0xFFFF);
}
return IRQ_HANDLED;
}
static int bfin_bf54x_probe(struct platform_device *pdev)
{
#ifndef NO_BL_SUPPORT
struct backlight_properties props;
#endif
struct bfin_bf54xfb_info *info;
struct fb_info *fbinfo;
int ret;
printk(KERN_INFO DRIVER_NAME ": FrameBuffer initializing...\n");
if (request_dma(CH_EPPI0, "CH_EPPI0") < 0) {
printk(KERN_ERR DRIVER_NAME
": couldn't request CH_EPPI0 DMA\n");
ret = -EFAULT;
goto out1;
}
fbinfo =
framebuffer_alloc(sizeof(struct bfin_bf54xfb_info), &pdev->dev);
if (!fbinfo) {
ret = -ENOMEM;
goto out2;
}
info = fbinfo->par;
info->fb = fbinfo;
info->dev = &pdev->dev;
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, fbinfo);
strcpy(fbinfo->fix.id, driver_name);
info->mach_info = pdev->dev.platform_data;
if (info->mach_info == NULL) {
dev_err(&pdev->dev,
"no platform data for lcd, cannot attach\n");
ret = -EINVAL;
goto out3;
}
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.type_aux = 0;
fbinfo->fix.xpanstep = 0;
fbinfo->fix.ypanstep = 0;
fbinfo->fix.ywrapstep = 0;
fbinfo->fix.accel = FB_ACCEL_NONE;
fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
fbinfo->var.nonstd = 0;
fbinfo->var.activate = FB_ACTIVATE_NOW;
fbinfo->var.height = info->mach_info->height;
fbinfo->var.width = info->mach_info->width;
fbinfo->var.accel_flags = 0;
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
fbinfo->fbops = &bfin_bf54x_fb_ops;
fbinfo->flags = FBINFO_FLAG_DEFAULT;
fbinfo->var.xres = info->mach_info->xres.defval;
fbinfo->var.xres_virtual = info->mach_info->xres.defval;
fbinfo->var.yres = info->mach_info->yres.defval;
fbinfo->var.yres_virtual = info->mach_info->yres.defval;
fbinfo->var.bits_per_pixel = info->mach_info->bpp.defval;
fbinfo->var.upper_margin = 0;
fbinfo->var.lower_margin = 0;
fbinfo->var.vsync_len = 0;
fbinfo->var.left_margin = 0;
fbinfo->var.right_margin = 0;
fbinfo->var.hsync_len = 0;
fbinfo->var.red.offset = 16;
fbinfo->var.green.offset = 8;
fbinfo->var.blue.offset = 0;
fbinfo->var.transp.offset = 0;
fbinfo->var.red.length = 8;
fbinfo->var.green.length = 8;
fbinfo->var.blue.length = 8;
fbinfo->var.transp.length = 0;
fbinfo->fix.smem_len = info->mach_info->xres.max *
info->mach_info->yres.max * info->mach_info->bpp.max / 8;
fbinfo->fix.line_length = fbinfo->var.xres_virtual *
fbinfo->var.bits_per_pixel / 8;
info->fb_buffer =
dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
GFP_KERNEL);
if (NULL == info->fb_buffer) {
printk(KERN_ERR DRIVER_NAME
": couldn't allocate dma buffer.\n");
ret = -ENOMEM;
goto out3;
}
fbinfo->screen_base = (void *)info->fb_buffer;
fbinfo->fix.smem_start = (int)info->fb_buffer;
fbinfo->fbops = &bfin_bf54x_fb_ops;
fbinfo->pseudo_palette = devm_kzalloc(&pdev->dev, sizeof(u32) * 16,
GFP_KERNEL);
if (!fbinfo->pseudo_palette) {
printk(KERN_ERR DRIVER_NAME
"Fail to allocate pseudo_palette\n");
ret = -ENOMEM;
goto out4;
}
if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
< 0) {
printk(KERN_ERR DRIVER_NAME
"Fail to allocate colormap (%d entries)\n",
BFIN_LCD_NBR_PALETTE_ENTRIES);
ret = -EFAULT;
goto out4;
}
if (request_ports(info)) {
printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n");
ret = -EFAULT;
goto out6;
}
info->irq = platform_get_irq(pdev, 0);
if (info->irq < 0) {
ret = -EINVAL;
goto out7;
}
if (request_irq(info->irq, bfin_bf54x_irq_error, 0,
"PPI ERROR", info) < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to request PPI ERROR IRQ\n");
ret = -EFAULT;
goto out7;
}
if (register_framebuffer(fbinfo) < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to register framebuffer.\n");
ret = -EINVAL;
goto out8;
}
#ifndef NO_BL_SUPPORT
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = 255;
bl_dev = backlight_device_register("bf54x-bl", NULL, NULL,
&bfin_lq043fb_bl_ops, &props);
if (IS_ERR(bl_dev)) {
printk(KERN_ERR DRIVER_NAME
": unable to register backlight.\n");
ret = -EINVAL;
unregister_framebuffer(fbinfo);
goto out8;
}
lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops);
lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
#endif
return 0;
out8:
free_irq(info->irq, info);
out7:
free_ports(info);
out6:
fb_dealloc_cmap(&fbinfo->cmap);
out4:
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
out3:
framebuffer_release(fbinfo);
out2:
free_dma(CH_EPPI0);
out1:
return ret;
}
static int bfin_bf54x_remove(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_bf54xfb_info *info = fbinfo->par;
free_dma(CH_EPPI0);
free_irq(info->irq, info);
if (info->fb_buffer != NULL)
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
fb_dealloc_cmap(&fbinfo->cmap);
#ifndef NO_BL_SUPPORT
lcd_device_unregister(lcd_dev);
backlight_device_unregister(bl_dev);
#endif
unregister_framebuffer(fbinfo);
free_ports(info);
printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
return 0;
}
#ifdef CONFIG_PM
static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
{
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
disable_dma(CH_EPPI0);
bfin_write_EPPI0_STATUS(0xFFFF);
return 0;
}
static int bfin_bf54x_resume(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_bf54xfb_info *info = fbinfo->par;
if (info->lq043_open_cnt) {
bfin_write_EPPI0_CONTROL(0);
SSYNC();
config_dma(info);
config_ppi(info);
/* start dma */
enable_dma(CH_EPPI0);
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
}
return 0;
}
#else
#define bfin_bf54x_suspend NULL
#define bfin_bf54x_resume NULL
#endif
static struct platform_driver bfin_bf54x_driver = {
.probe = bfin_bf54x_probe,
.remove = bfin_bf54x_remove,
.suspend = bfin_bf54x_suspend,
.resume = bfin_bf54x_resume,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(bfin_bf54x_driver);
MODULE_DESCRIPTION("Blackfin BF54x TFT LCD Driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/bfin-lq035q1-fb.c 已删除 100644 → 0
浏览文件 @ 8cbfbae8
此差异已折叠。
drivers/video/fbdev/bfin-t350mcqb-fb.c 已删除 100644 → 0
浏览文件 @ 8cbfbae8
/*
* File: drivers/video/bfin-t350mcqb-fb.c
* Based on:
* Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
*
* Created:
* Description: Blackfin LCD Framebuffer driver
*
*
* Modified:
* Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/blackfin.h>
#include <asm/irq.h>
#include <asm/dma-mapping.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <asm/gptimers.h>
#define NO_BL_SUPPORT
#define LCD_X_RES 320 /* Horizontal Resolution */
#define LCD_Y_RES 240 /* Vertical Resolution */
#define LCD_BPP 24 /* Bit Per Pixel */
#define DMA_BUS_SIZE 16
#define LCD_CLK (12*1000*1000) /* 12MHz */
#define CLOCKS_PER_PIX 3
/*
* HS and VS timing parameters (all in number of PPI clk ticks)
*/
#define U_LINE 1 /* Blanking Lines */
#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */
#define H_PULSE 90 /* HS pulse width */
#define H_START 204 /* first valid pixel */
#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
#define DRIVER_NAME "bfin-t350mcqb"
static char driver_name[] = DRIVER_NAME;
struct bfin_t350mcqbfb_info {
struct fb_info *fb;
struct device *dev;
unsigned char *fb_buffer; /* RGB Buffer */
dma_addr_t dma_handle;
int lq043_open_cnt;
int irq;
spinlock_t lock; /* lock */
u32 pseudo_pal[16];
};
static int nocursor;
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
#define PPI_TX_MODE 0x2
#define PPI_XFER_TYPE_11 0xC
#define PPI_PORT_CFG_01 0x10
#define PPI_PACK_EN 0x80
#define PPI_POLS_1 0x8000
static void bfin_t350mcqb_config_ppi(struct bfin_t350mcqbfb_info *fbi)
{
bfin_write_PPI_DELAY(H_START);
bfin_write_PPI_COUNT(H_ACTPIX-1);
bfin_write_PPI_FRAME(V_LINES);
bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */
PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
PPI_PACK_EN | /* packing enabled PACK_EN */
PPI_POLS_1); /* faling edge syncs POLS */
}
static inline void bfin_t350mcqb_disable_ppi(void)
{
bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
}
static inline void bfin_t350mcqb_enable_ppi(void)
{
bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
}
static void bfin_t350mcqb_start_timers(void)
{
unsigned long flags;
local_irq_save(flags);
enable_gptimers(TIMER1bit);
enable_gptimers(TIMER0bit);
local_irq_restore(flags);
}
static void bfin_t350mcqb_stop_timers(void)
{
disable_gptimers(TIMER0bit | TIMER1bit);
set_gptimer_status(0, TIMER_STATUS_TRUN0 | TIMER_STATUS_TRUN1 |
TIMER_STATUS_TIMIL0 | TIMER_STATUS_TIMIL1 |
TIMER_STATUS_TOVF0 | TIMER_STATUS_TOVF1);
}
static void bfin_t350mcqb_init_timers(void)
{
bfin_t350mcqb_stop_timers();
set_gptimer_period(TIMER0_id, H_PERIOD);
set_gptimer_pwidth(TIMER0_id, H_PULSE);
set_gptimer_config(TIMER0_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
TIMER_TIN_SEL | TIMER_CLK_SEL|
TIMER_EMU_RUN);
set_gptimer_period(TIMER1_id, V_PERIOD);
set_gptimer_pwidth(TIMER1_id, V_PULSE);
set_gptimer_config(TIMER1_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
TIMER_TIN_SEL | TIMER_CLK_SEL |
TIMER_EMU_RUN);
}
static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi)
{
set_dma_config(CH_PPI,
set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
INTR_DISABLE, DIMENSION_2D,
DATA_SIZE_16,
DMA_NOSYNC_KEEP_DMA_BUF));
set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
set_dma_y_count(CH_PPI, V_LINES);
set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
}
static u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
P_PPI0_D6, P_PPI0_D7, 0};
static int bfin_t350mcqb_request_ports(int action)
{
if (action) {
if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
printk(KERN_ERR "Requesting Peripherals failed\n");
return -EFAULT;
}
} else
peripheral_free_list(ppi0_req_8);
return 0;
}
static int bfin_t350mcqb_fb_open(struct fb_info *info, int user)
{
struct bfin_t350mcqbfb_info *fbi = info->par;
spin_lock(&fbi->lock);
fbi->lq043_open_cnt++;
if (fbi->lq043_open_cnt <= 1) {
bfin_t350mcqb_disable_ppi();
SSYNC();
bfin_t350mcqb_config_dma(fbi);
bfin_t350mcqb_config_ppi(fbi);
bfin_t350mcqb_init_timers();
/* start dma */
enable_dma(CH_PPI);
bfin_t350mcqb_enable_ppi();
bfin_t350mcqb_start_timers();
}
spin_unlock(&fbi->lock);
return 0;
}
static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
{
struct bfin_t350mcqbfb_info *fbi = info->par;
spin_lock(&fbi->lock);
fbi->lq043_open_cnt--;
if (fbi->lq043_open_cnt <= 0) {
bfin_t350mcqb_disable_ppi();
SSYNC();
disable_dma(CH_PPI);
bfin_t350mcqb_stop_timers();
}
spin_unlock(&fbi->lock);
return 0;
}
static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
switch (var->bits_per_pixel) {
case 24:/* TRUECOLOUR, 16m */
var->red.offset = 0;
var->green.offset = 8;
var->blue.offset = 16;
var->red.length = var->green.length = var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
break;
default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
}
if (info->var.xres != var->xres || info->var.yres != var->yres ||
info->var.xres_virtual != var->xres_virtual ||
info->var.yres_virtual != var->yres_virtual) {
pr_debug("%s: Resolution not supported: X%u x Y%u \n",
__func__, var->xres, var->yres);
return -EINVAL;
}
/*
* Memory limit
*/
if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
__func__, var->yres_virtual);
return -ENOMEM;
}
return 0;
}
int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
if (nocursor)
return 0;
else
return -EINVAL; /* just to force soft_cursor() call */
}
static int bfin_t350mcqb_fb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp,
struct fb_info *info)
{
if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
return -EINVAL;
if (info->var.grayscale) {
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
}
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
u32 value;
/* Place color in the pseudopalette */
if (regno > 16)
return -EINVAL;
red >>= (16 - info->var.red.length);
green >>= (16 - info->var.green.length);
blue >>= (16 - info->var.blue.length);
value = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset);
value &= 0xFFFFFF;
((u32 *) (info->pseudo_palette))[regno] = value;
}
return 0;
}
static struct fb_ops bfin_t350mcqb_fb_ops = {
.owner = THIS_MODULE,
.fb_open = bfin_t350mcqb_fb_open,
.fb_release = bfin_t350mcqb_fb_release,
.fb_check_var = bfin_t350mcqb_fb_check_var,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_cursor = bfin_t350mcqb_fb_cursor,
.fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
};
#ifndef NO_BL_SUPPORT
static int bl_get_brightness(struct backlight_device *bd)
{
return 0;
}
static const struct backlight_ops bfin_lq043fb_bl_ops = {
.get_brightness = bl_get_brightness,
};
static struct backlight_device *bl_dev;
static int bfin_lcd_get_power(struct lcd_device *dev)
{
return 0;
}
static int bfin_lcd_set_power(struct lcd_device *dev, int power)
{
return 0;
}
static int bfin_lcd_get_contrast(struct lcd_device *dev)
{
return 0;
}
static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
{
return 0;
}
static int bfin_lcd_check_fb(struct lcd_device *dev, struct fb_info *fi)
{
if (!fi || (fi == &bfin_t350mcqb_fb))
return 1;
return 0;
}
static struct lcd_ops bfin_lcd_ops = {
.get_power = bfin_lcd_get_power,
.set_power = bfin_lcd_set_power,
.get_contrast = bfin_lcd_get_contrast,
.set_contrast = bfin_lcd_set_contrast,
.check_fb = bfin_lcd_check_fb,
};
static struct lcd_device *lcd_dev;
#endif
static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id)
{
/*struct bfin_t350mcqbfb_info *info = (struct bfin_t350mcqbfb_info *)dev_id;*/
u16 status = bfin_read_PPI_STATUS();
bfin_write_PPI_STATUS(0xFFFF);
if (status) {
bfin_t350mcqb_disable_ppi();
disable_dma(CH_PPI);
/* start dma */
enable_dma(CH_PPI);
bfin_t350mcqb_enable_ppi();
bfin_write_PPI_STATUS(0xFFFF);
}
return IRQ_HANDLED;
}
static int bfin_t350mcqb_probe(struct platform_device *pdev)
{
#ifndef NO_BL_SUPPORT
struct backlight_properties props;
#endif
struct bfin_t350mcqbfb_info *info;
struct fb_info *fbinfo;
int ret;
printk(KERN_INFO DRIVER_NAME ": %dx%d %d-bit RGB FrameBuffer initializing...\n",
LCD_X_RES, LCD_Y_RES, LCD_BPP);
if (request_dma(CH_PPI, "CH_PPI") < 0) {
printk(KERN_ERR DRIVER_NAME
": couldn't request CH_PPI DMA\n");
ret = -EFAULT;
goto out1;
}
fbinfo =
framebuffer_alloc(sizeof(struct bfin_t350mcqbfb_info), &pdev->dev);
if (!fbinfo) {
ret = -ENOMEM;
goto out2;
}
info = fbinfo->par;
info->fb = fbinfo;
info->dev = &pdev->dev;
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, fbinfo);
strcpy(fbinfo->fix.id, driver_name);
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.type_aux = 0;
fbinfo->fix.xpanstep = 0;
fbinfo->fix.ypanstep = 0;
fbinfo->fix.ywrapstep = 0;
fbinfo->fix.accel = FB_ACCEL_NONE;
fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
fbinfo->var.nonstd = 0;
fbinfo->var.activate = FB_ACTIVATE_NOW;
fbinfo->var.height = 53;
fbinfo->var.width = 70;
fbinfo->var.accel_flags = 0;
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
fbinfo->var.xres = LCD_X_RES;
fbinfo->var.xres_virtual = LCD_X_RES;
fbinfo->var.yres = LCD_Y_RES;
fbinfo->var.yres_virtual = LCD_Y_RES;
fbinfo->var.bits_per_pixel = LCD_BPP;
fbinfo->var.red.offset = 0;
fbinfo->var.green.offset = 8;
fbinfo->var.blue.offset = 16;
fbinfo->var.transp.offset = 0;
fbinfo->var.red.length = 8;
fbinfo->var.green.length = 8;
fbinfo->var.blue.length = 8;
fbinfo->var.transp.length = 0;
fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8;
fbinfo->fix.line_length = fbinfo->var.xres_virtual *
fbinfo->var.bits_per_pixel / 8;
fbinfo->fbops = &bfin_t350mcqb_fb_ops;
fbinfo->flags = FBINFO_FLAG_DEFAULT;
info->fb_buffer = dma_alloc_coherent(NULL, fbinfo->fix.smem_len +
ACTIVE_VIDEO_MEM_OFFSET,
&info->dma_handle, GFP_KERNEL);
if (NULL == info->fb_buffer) {
printk(KERN_ERR DRIVER_NAME
": couldn't allocate dma buffer.\n");
ret = -ENOMEM;
goto out3;
}
fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
fbinfo->fbops = &bfin_t350mcqb_fb_ops;
fbinfo->pseudo_palette = &info->pseudo_pal;
if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
< 0) {
printk(KERN_ERR DRIVER_NAME
"Fail to allocate colormap (%d entries)\n",
BFIN_LCD_NBR_PALETTE_ENTRIES);
ret = -EFAULT;
goto out4;
}
if (bfin_t350mcqb_request_ports(1)) {
printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n");
ret = -EFAULT;
goto out6;
}
info->irq = platform_get_irq(pdev, 0);
if (info->irq < 0) {
ret = -EINVAL;
goto out7;
}
ret = request_irq(info->irq, bfin_t350mcqb_irq_error, 0,
"PPI ERROR", info);
if (ret < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to request PPI ERROR IRQ\n");
goto out7;
}
if (register_framebuffer(fbinfo) < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to register framebuffer.\n");
ret = -EINVAL;
goto out8;
}
#ifndef NO_BL_SUPPORT
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = 255;
bl_dev = backlight_device_register("bf52x-bl", NULL, NULL,
&bfin_lq043fb_bl_ops, &props);
if (IS_ERR(bl_dev)) {
printk(KERN_ERR DRIVER_NAME
": unable to register backlight.\n");
ret = -EINVAL;
unregister_framebuffer(fbinfo);
goto out8;
}
lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
#endif
return 0;
out8:
free_irq(info->irq, info);
out7:
bfin_t350mcqb_request_ports(0);
out6:
fb_dealloc_cmap(&fbinfo->cmap);
out4:
dma_free_coherent(NULL, fbinfo->fix.smem_len + ACTIVE_VIDEO_MEM_OFFSET,
info->fb_buffer, info->dma_handle);
out3:
framebuffer_release(fbinfo);
out2:
free_dma(CH_PPI);
out1:
return ret;
}
static int bfin_t350mcqb_remove(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_t350mcqbfb_info *info = fbinfo->par;
unregister_framebuffer(fbinfo);
free_dma(CH_PPI);
free_irq(info->irq, info);
if (info->fb_buffer != NULL)
dma_free_coherent(NULL, fbinfo->fix.smem_len +
ACTIVE_VIDEO_MEM_OFFSET, info->fb_buffer,
info->dma_handle);
fb_dealloc_cmap(&fbinfo->cmap);
#ifndef NO_BL_SUPPORT
lcd_device_unregister(lcd_dev);
backlight_device_unregister(bl_dev);
#endif
bfin_t350mcqb_request_ports(0);
framebuffer_release(fbinfo);
printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
return 0;
}
#ifdef CONFIG_PM
static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_t350mcqbfb_info *fbi = fbinfo->par;
if (fbi->lq043_open_cnt) {
bfin_t350mcqb_disable_ppi();
disable_dma(CH_PPI);
bfin_t350mcqb_stop_timers();
bfin_write_PPI_STATUS(-1);
}
return 0;
}
static int bfin_t350mcqb_resume(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_t350mcqbfb_info *fbi = fbinfo->par;
if (fbi->lq043_open_cnt) {
bfin_t350mcqb_config_dma(fbi);
bfin_t350mcqb_config_ppi(fbi);
bfin_t350mcqb_init_timers();
/* start dma */
enable_dma(CH_PPI);
bfin_t350mcqb_enable_ppi();
bfin_t350mcqb_start_timers();
}
return 0;
}
#else
#define bfin_t350mcqb_suspend NULL
#define bfin_t350mcqb_resume NULL
#endif
static struct platform_driver bfin_t350mcqb_driver = {
.probe = bfin_t350mcqb_probe,
.remove = bfin_t350mcqb_remove,
.suspend = bfin_t350mcqb_suspend,
.resume = bfin_t350mcqb_resume,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(bfin_t350mcqb_driver);
MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/bfin_adv7393fb.c 已删除 100644 → 0
浏览文件 @ 8cbfbae8
此差异已折叠。
drivers/video/fbdev/bfin_adv7393fb.h 已删除 100644 → 0
浏览文件 @ 8cbfbae8
/*
* Frame buffer driver for ADV7393/2 video encoder
*
* Copyright 2006-2009 Analog Devices Inc.
* Licensed under the GPL-2 or late.
*/
#ifndef __BFIN_ADV7393FB_H__
#define __BFIN_ADV7393FB_H__
#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
#ifdef CONFIG_NTSC
# define VMODE 0
#endif
#ifdef CONFIG_PAL
# define VMODE 1
#endif
#ifdef CONFIG_NTSC_640x480
# define VMODE 2
#endif
#ifdef CONFIG_PAL_640x480
# define VMODE 3
#endif
#ifdef CONFIG_NTSC_YCBCR
# define VMODE 4
#endif
#ifdef CONFIG_PAL_YCBCR
# define VMODE 5
#endif
#ifndef VMODE
# define VMODE 1
#endif
#ifdef CONFIG_ADV7393_2XMEM
# define VMEM 2
#else
# define VMEM 1
#endif
#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
# define DMA_CFG_VAL 0x7935 /* Set Sync Bit */
# define VB_DUMMY_MEMORY_SOURCE L1_DATA_B_START
#else
# define DMA_CFG_VAL 0x7915
# define VB_DUMMY_MEMORY_SOURCE BOOT_ROM_START
#endif
enum {
DESTRUCT,
BUILD,
};
enum {
POWER_ON,
POWER_DOWN,
BLANK_ON,
BLANK_OFF,
};
struct adv7393fb_modes {
const s8 name[25]; /* Full name */
u16 xres; /* Active Horizonzal Pixels */
u16 yres; /* Active Vertical Pixels */
u16 bpp;
u16 vmode;
u16 a_lines; /* Active Lines per Field */
u16 vb1_lines; /* Vertical Blanking Field 1 Lines */
u16 vb2_lines; /* Vertical Blanking Field 2 Lines */
u16 tot_lines; /* Total Lines per Frame */
u16 boeft_blank; /* Before Odd/Even Field Transition No. of Blank Pixels */
u16 aoeft_blank; /* After Odd/Even Field Transition No. of Blank Pixels */
const s8 *adv7393_i2c_initd;
u16 adv7393_i2c_initd_len;
};
static const u8 init_NTSC_TESTPATTERN[] = {
0x00, 0x1E, /* Power up all DACs and PLL */
0x01, 0x00, /* SD-Only Mode */
0x80, 0x10, /* SSAF Luma Filter Enabled, NTSC Mode */
0x82, 0xCB, /* Step control on, pixel data valid, pedestal on, PrPb SSAF on, CVBS/YC output */
0x84, 0x40, /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
};
static const u8 init_NTSC[] = {
0x00, 0x1E, /* Power up all DACs and PLL */
0xC3, 0x26, /* Program RGB->YCrCb Color Space conversion matrix */
0xC5, 0x12, /* Program RGB->YCrCb Color Space conversion matrix */
0xC2, 0x4A, /* Program RGB->YCrCb Color Space conversion matrix */
0xC6, 0x5E, /* Program RGB->YCrCb Color Space conversion matrix */
0xBD, 0x19, /* Program RGB->YCrCb Color Space conversion matrix */
0xBF, 0x42, /* Program RGB->YCrCb Color Space conversion matrix */
0x8C, 0x1F, /* NTSC Subcarrier Frequency */
0x8D, 0x7C, /* NTSC Subcarrier Frequency */
0x8E, 0xF0, /* NTSC Subcarrier Frequency */
0x8F, 0x21, /* NTSC Subcarrier Frequency */
0x01, 0x00, /* SD-Only Mode */
0x80, 0x30, /* SSAF Luma Filter Enabled, NTSC Mode */
0x82, 0x8B, /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
0x87, 0x80, /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
0x86, 0x82,
0x8B, 0x11,
0x88, 0x20,
0x8A, 0x0d,
};
static const u8 init_PAL[] = {
0x00, 0x1E, /* Power up all DACs and PLL */
0xC3, 0x26, /* Program RGB->YCrCb Color Space conversion matrix */
0xC5, 0x12, /* Program RGB->YCrCb Color Space conversion matrix */
0xC2, 0x4A, /* Program RGB->YCrCb Color Space conversion matrix */
0xC6, 0x5E, /* Program RGB->YCrCb Color Space conversion matrix */
0xBD, 0x19, /* Program RGB->YCrCb Color Space conversion matrix */
0xBF, 0x42, /* Program RGB->YCrCb Color Space conversion matrix */
0x8C, 0xCB, /* PAL Subcarrier Frequency */
0x8D, 0x8A, /* PAL Subcarrier Frequency */
0x8E, 0x09, /* PAL Subcarrier Frequency */
0x8F, 0x2A, /* PAL Subcarrier Frequency */
0x01, 0x00, /* SD-Only Mode */
0x80, 0x11, /* SSAF Luma Filter Enabled, PAL Mode */
0x82, 0x8B, /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
0x87, 0x80, /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
0x86, 0x82,
0x8B, 0x11,
0x88, 0x20,
0x8A, 0x0d,
};
static const u8 init_NTSC_YCbCr[] = {
0x00, 0x1E, /* Power up all DACs and PLL */
0x8C, 0x1F, /* NTSC Subcarrier Frequency */
0x8D, 0x7C, /* NTSC Subcarrier Frequency */
0x8E, 0xF0, /* NTSC Subcarrier Frequency */
0x8F, 0x21, /* NTSC Subcarrier Frequency */
0x01, 0x00, /* SD-Only Mode */
0x80, 0x30, /* SSAF Luma Filter Enabled, NTSC Mode */
0x82, 0x8B, /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
0x87, 0x00, /* DAC 2 = Luma, DAC 3 = Chroma */
0x86, 0x82,
0x8B, 0x11,
0x88, 0x08,
0x8A, 0x0d,
};
static const u8 init_PAL_YCbCr[] = {
0x00, 0x1E, /* Power up all DACs and PLL */
0x8C, 0xCB, /* PAL Subcarrier Frequency */
0x8D, 0x8A, /* PAL Subcarrier Frequency */
0x8E, 0x09, /* PAL Subcarrier Frequency */
0x8F, 0x2A, /* PAL Subcarrier Frequency */
0x01, 0x00, /* SD-Only Mode */
0x80, 0x11, /* SSAF Luma Filter Enabled, PAL Mode */
0x82, 0x8B, /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
0x87, 0x00, /* DAC 2 = Luma, DAC 3 = Chroma */
0x86, 0x82,
0x8B, 0x11,
0x88, 0x08,
0x8A, 0x0d,
};
static struct adv7393fb_modes known_modes[] = {
/* NTSC 720x480 CRT */
{
.name = "NTSC 720x480",
.xres = 720,
.yres = 480,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 240,
.vb1_lines = 22,
.vb2_lines = 23,
.tot_lines = 525,
.boeft_blank = 16,
.aoeft_blank = 122,
.adv7393_i2c_initd = init_NTSC,
.adv7393_i2c_initd_len = sizeof(init_NTSC)
},
/* PAL 720x480 CRT */
{
.name = "PAL 720x576",
.xres = 720,
.yres = 576,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 288,
.vb1_lines = 24,
.vb2_lines = 25,
.tot_lines = 625,
.boeft_blank = 12,
.aoeft_blank = 132,
.adv7393_i2c_initd = init_PAL,
.adv7393_i2c_initd_len = sizeof(init_PAL)
},
/* NTSC 640x480 CRT Experimental */
{
.name = "NTSC 640x480",
.xres = 640,
.yres = 480,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 240,
.vb1_lines = 22,
.vb2_lines = 23,
.tot_lines = 525,
.boeft_blank = 16 + 40,
.aoeft_blank = 122 + 40,
.adv7393_i2c_initd = init_NTSC,
.adv7393_i2c_initd_len = sizeof(init_NTSC)
},
/* PAL 640x480 CRT Experimental */
{
.name = "PAL 640x480",
.xres = 640,
.yres = 480,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 288 - 20,
.vb1_lines = 24 + 20,
.vb2_lines = 25 + 20,
.tot_lines = 625,
.boeft_blank = 12 + 40,
.aoeft_blank = 132 + 40,
.adv7393_i2c_initd = init_PAL,
.adv7393_i2c_initd_len = sizeof(init_PAL)
},
/* NTSC 720x480 YCbCR */
{
.name = "NTSC 720x480 YCbCR",
.xres = 720,
.yres = 480,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 240,
.vb1_lines = 22,
.vb2_lines = 23,
.tot_lines = 525,
.boeft_blank = 16,
.aoeft_blank = 122,
.adv7393_i2c_initd = init_NTSC_YCbCr,
.adv7393_i2c_initd_len = sizeof(init_NTSC_YCbCr)
},
/* PAL 720x480 CRT */
{
.name = "PAL 720x576 YCbCR",
.xres = 720,
.yres = 576,
.bpp = 16,
.vmode = FB_VMODE_INTERLACED,
.a_lines = 288,
.vb1_lines = 24,
.vb2_lines = 25,
.tot_lines = 625,
.boeft_blank = 12,
.aoeft_blank = 132,
.adv7393_i2c_initd = init_PAL_YCbCr,
.adv7393_i2c_initd_len = sizeof(init_PAL_YCbCr)
}
};
struct adv7393fb_regs {
};
struct adv7393fb_device {
struct fb_info info; /* FB driver info record */
struct i2c_client *client;
struct dmasg *descriptor_list_head;
struct dmasg *vb1;
struct dmasg *av1;
struct dmasg *vb2;
struct dmasg *av2;
dma_addr_t dma_handle;
struct fb_info bfin_adv7393_fb;
struct adv7393fb_modes *modes;
struct adv7393fb_regs *regs; /* Registers memory map */
size_t regs_len;
size_t fb_len;
size_t line_len;
u16 open;
u16 *fb_mem; /* RGB Buffer */
};
#define to_adv7393fb_device(_info) \
(_info ? container_of(_info, struct adv7393fb_device, info) : NULL);
static int bfin_adv7393_fb_open(struct fb_info *info, int user);
static int bfin_adv7393_fb_release(struct fb_info *info, int user);
static int bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info);
static int bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info);
static int bfin_adv7393_fb_blank(int blank, struct fb_info *info);
static void bfin_config_ppi(struct adv7393fb_device *fbdev);
static int bfin_config_dma(struct adv7393fb_device *fbdev);
static void bfin_disable_dma(void);
static void bfin_enable_ppi(void);
static void bfin_disable_ppi(void);
static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value);
static inline int adv7393_read(struct i2c_client *client, u8 reg);
static int adv7393_write_block(struct i2c_client *client, const u8 *data,
unsigned int len);
int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
static int bfin_adv7393_fb_setcolreg(u_int, u_int, u_int, u_int,
u_int, struct fb_info *info);
#endif
include/linux/fb.h
浏览文件 @ e3ed8b43
......@@ -571,8 +571,7 @@ static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || \
defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || \
defined(__avr32__) || defined(__bfin__) || defined(__arm__) || \
defined(__aarch64__)
defined(__arm__) || defined(__aarch64__)
#define fb_readb __raw_readb
#define fb_readw __raw_readw
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或