[S390] Add processor type march=z10 and a processor type safety check.

This patch adds the code generation option for IBM System z10 and
adds a check in head[31,64].S to prevents the execution of a kernel
compiled for a new processor type on an old machine.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/Kconfig

@@ -230,6 +230,14 @@ config MARCH_Z9_109
 	  Class (z9 BC). The kernel will be slightly faster but will not
 	  work on older machines such as the z990, z890, z900, and z800.
 
+config MARCH_Z10
+	bool "IBM System z10"
+	help
+	  Select this to enable optimizations for IBM System z10. The
+	  kernel will be slightly faster but will not work on older
+	  machines such as the z990, z890, z900, z800, z9-109, z9-ec
+	  and z9-bc.
+
 endchoice
 
 config PACK_STACK

arch/s390/Makefile

@@ -34,6 +34,7 @@ cflags-$(CONFIG_MARCH_G5)   += $(call cc-option,-march=g5)
 cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900)
 cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990)
 cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109)
+cflags-$(CONFIG_MARCH_Z10) += $(call cc-option,-march=z10)
 
 #KBUILD_IMAGE is necessary for make rpm
 KBUILD_IMAGE	:=arch/s390/boot/image

arch/s390/kernel/head.S

@@ -461,6 +461,55 @@ start:
 	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
 	.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
 
+#
+# startup-code at 0x10000, running in absolute addressing mode
+# this is called either by the ipl loader or directly by PSW restart
+# or linload or SALIPL
+#
+	.org	0x10000
+startup:basr	%r13,0			# get base
+.LPG0:
+
+#ifndef CONFIG_MARCH_G5
+	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
+	stidp	__LC_CPUID		# store cpuid
+	lhi	%r0,(3f-2f) / 2
+	la	%r1,2f-.LPG0(%r13)
+0:	clc	__LC_CPUID+4(2),0(%r1)
+	jne	3f
+	lpsw	1f-.LPG0(13)		# machine type not good enough, crash
+	.align 16
+1:	.long	0x000a0000,0x00000000
+2:
+#if defined(CONFIG_MARCH_Z10)
+	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086, 0x2094, 0x2096
+#elif defined(CONFIG_MARCH_Z9_109)
+	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086
+#elif defined(CONFIG_MARCH_Z990)
+	.short 0x9672, 0x2064, 0x2066
+#elif defined(CONFIG_MARCH_Z900)
+	.short 0x9672
+#endif
+3:	la	%r1,2(%r1)
+	brct	%r0,0b
+#endif
+
+	l	%r13,0f-.LPG0(%r13)
+	b	0(%r13)
+0:	.long	startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+	.org	PARMAREA
+	.long	0,0			# IPL_DEVICE
+	.long	0,0			# INITRD_START
+	.long	0,0			# INITRD_SIZE
+
+	.org	COMMAND_LINE
+	.byte	"root=/dev/ram0 ro"
+	.byte	0
+
 #ifdef CONFIG_64BIT
 #include "head64.S"
 #else

arch/s390/kernel/head31.S

@@ -10,34 +10,13 @@
  *
  */
 
-#
-# startup-code at 0x10000, running in absolute addressing mode
-# this is called either by the ipl loader or directly by PSW restart
-# or linload or SALIPL
-#
-	.org	0x10000
-startup:basr	%r13,0			# get base
-.LPG0:	l	%r13,0f-.LPG0(%r13)
-	b	0(%r13)
-0:	.long	startup_continue
-
-#
-# params at 10400 (setup.h)
-#
-	.org	PARMAREA
-	.long	0,0			# IPL_DEVICE
-	.long	0,0			# INITRD_START
-	.long	0,0			# INITRD_SIZE
-
-	.org	COMMAND_LINE
-	.byte	"root=/dev/ram0 ro"
-	.byte	0
-
 	.org	0x11000
 
 startup_continue:
 	basr	%r13,0			# get base
-.LPG1:	mvi	__LC_AR_MODE_ID,0	# set ESA flag (mode 0)
+.LPG1:
+
+	mvi	__LC_AR_MODE_ID,0	# set ESA flag (mode 0)
 	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
 	l	%r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
 					# move IPL device to lowcore

arch/s390/kernel/head64.S

@@ -10,29 +10,6 @@
  *
  */
 
-#
-# startup-code at 0x10000, running in absolute addressing mode
-# this is called either by the ipl loader or directly by PSW restart
-# or linload or SALIPL
-#
-	.org	0x10000
-startup:basr	%r13,0			# get base
-.LPG0:	l	%r13,0f-.LPG0(%r13)
-	b	0(%r13)
-0:	.long	startup_continue
-
-#
-# params at 10400 (setup.h)
-#
-	.org	PARMAREA
-	.quad	0			# IPL_DEVICE
-	.quad	0			# INITRD_START
-	.quad	0			# INITRD_SIZE
-
-	.org	COMMAND_LINE
-	.byte	"root=/dev/ram0 ro"
-	.byte	0
-
 	.org	0x11000
 
 startup_continue: