Pratyush Anand has moved

pratyush.anand@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with pratyush.anand@gmail.com.
Signed-off-by: NPratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

.mailmap

@@ -95,6 +95,7 @@ Patrick Mochel <mochel@digitalimplant.org>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
+Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>

Documentation/ABI/testing/configfs-spear-pcie-gadget

 What:		/config/pcie-gadget
 Date:		Feb 2011
 KernelVersion:	2.6.37
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 
 	Interface is used to configure selected dual mode PCIe controller

Documentation/ABI/testing/sysfs-bus-usb-lvstest

@@ -4,14 +4,14 @@ driver is bound with root hub device.
 
 What:		/sys/bus/usb/devices/.../get_dev_desc
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Write to this node to issue "Get Device Descriptor"
 		for Link Layer Validation device. It is needed for TD.7.06.
 
 What:		/sys/bus/usb/devices/.../u1_timeout
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Set "U1 timeout" for the downstream port where Link Layer
 		Validation device is connected. Timeout value must be between 0
@@ -19,7 +19,7 @@ Description:
 
 What:		/sys/bus/usb/devices/.../u2_timeout
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Set "U2 timeout" for the downstream port where Link Layer
 		Validation device is connected. Timeout value must be between 0
@@ -27,21 +27,21 @@ Description:
 
 What:		/sys/bus/usb/devices/.../hot_reset
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Write to this node to issue "Reset" for Link Layer Validation
 		device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
 
 What:		/sys/bus/usb/devices/.../u3_entry
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Write to this node to issue "U3 entry" for Link Layer
 		Validation device. It is needed for TD.7.35 and TD.7.36.
 
 What:		/sys/bus/usb/devices/.../u3_exit
 Date:		March 2014
-Contact:	Pratyush Anand <pratyush.anand@st.com>
+Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Write to this node to issue "U3 exit" for Link Layer
 		Validation device. It is needed for TD.7.36.

Documentation/misc-devices/spear-pcie-gadget.txt

@@ -2,7 +2,7 @@ Spear PCIe Gadget Driver:
 
 Author
 =============
-Pratyush Anand (pratyush.anand@st.com)
+Pratyush Anand (pratyush.anand@gmail.com)
 
 Location
 ============

drivers/misc/spear13xx_pcie_gadget.c

@@ -2,7 +2,7 @@
  * drivers/misc/spear13xx_pcie_gadget.c
  *
  * Copyright (C) 2010 ST Microelectronics
- * Pratyush Anand<pratyush.anand@st.com>
+ * Pratyush Anand<pratyush.anand@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any

drivers/pci/host/pcie-spear13xx.c

@@ -4,7 +4,7 @@
  * SPEAr13xx PCIe Glue Layer Source Code
  *
  * Copyright (C) 2010-2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
  * Mohit Kumar <mohit.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
@@ -386,5 +386,5 @@ static int __init spear13xx_pcie_init(void)
 module_init(spear13xx_pcie_init);
 
 MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
 MODULE_LICENSE("GPL v2");

drivers/phy/phy-spear1310-miphy.c

@@ -2,7 +2,7 @@
  * ST SPEAr1310-miphy driver
  *
  * Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
  * Mohit Kumar <mohit.kumar@st.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -257,5 +257,5 @@ static struct platform_driver spear1310_miphy_driver = {
 module_platform_driver(spear1310_miphy_driver);
 
 MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
 MODULE_LICENSE("GPL v2");

drivers/phy/phy-spear1340-miphy.c

@@ -2,7 +2,7 @@
  * ST spear1340-miphy driver
  *
  * Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
  * Mohit Kumar <mohit.kumar@st.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -290,5 +290,5 @@ static struct platform_driver spear1340_miphy_driver = {
 module_platform_driver(spear1340_miphy_driver);
 
 MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
-MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
 MODULE_LICENSE("GPL v2");

drivers/usb/misc/lvstest.c

@@ -4,7 +4,7 @@
  * Test pattern generation for Link Layer Validation System Tests
  *
  * Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@st.com>
+ * Pratyush Anand <pratyush.anand@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any