i2c: xlp9xx: Handle NACK on DATA properly

In case we receive NACK on DATA we shouldn't be resetting the controller,
rather we should issue STOP command. This will terminate the current
transaction and -EIO is returned.

While at that handle the SMBus Quick Command properly.
We shouldn't be setting the XLP9XX_I2C_CMD_READ/WRITE for such
transactions.
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Reviewed-by: NJan Glauber <jglauber@cavium.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-xlp9xx.c

@@ -352,7 +352,9 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 
 	/* set cmd reg */
 	cmd = XLP9XX_I2C_CMD_START;
-	cmd |= (priv->msg_read ? XLP9XX_I2C_CMD_READ : XLP9XX_I2C_CMD_WRITE);
+	if (msg->len)
+		cmd |= (priv->msg_read ?
+			XLP9XX_I2C_CMD_READ : XLP9XX_I2C_CMD_WRITE);
 	if (last_msg)
 		cmd |= XLP9XX_I2C_CMD_STOP;
 
@@ -361,12 +363,12 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 	timeleft = msecs_to_jiffies(XLP9XX_I2C_TIMEOUT_MS);
 	timeleft = wait_for_completion_timeout(&priv->msg_complete, timeleft);
 
-	if (priv->msg_err) {
+	if (priv->msg_err & XLP9XX_I2C_INTEN_BUSERR) {
 		dev_dbg(priv->dev, "transfer error %x!\n", priv->msg_err);
-		if (priv->msg_err & XLP9XX_I2C_INTEN_BUSERR)
-			xlp9xx_i2c_init(priv);
-		return (priv->msg_err & XLP9XX_I2C_INTEN_NACKADDR) ?
-			-ENXIO : -EIO;
+		xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CMD, XLP9XX_I2C_CMD_STOP);
+		return -EIO;
+	} else if (priv->msg_err & XLP9XX_I2C_INTEN_NACKADDR) {
+		return -ENXIO;
 	}
 
 	if (timeleft == 0) {