staging: greybus: gpio: switch GPIO portions to use GPIOLIB_IRQCHIP

Convert the GPIO driver to use the GPIO irqchip library
GPIOLIB_IRQCHIP instead of reimplementing the same.
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/greybus/Kconfig

@@ -148,6 +148,7 @@ if GREYBUS_BRIDGED_PHY
 config GREYBUS_GPIO
 	tristate "Greybus GPIO Bridged PHY driver"
 	depends on GPIOLIB
+	select GPIOLIB_IRQCHIP
 	---help---
 	  Select this option if you have a device that follows the
 	  Greybus GPIO Bridged PHY Class specification.

drivers/staging/greybus/TODO

 * Convert all uses of the old GPIO API from <linux/gpio.h> to the
   GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO
   lines from device tree or ACPI.
-* Convert the GPIO driver to use the GPIO irqchip library
-  GPIOLIB_IRQCHIP instead of reimplementing the same.

drivers/staging/greybus/gpio.c

@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/gpio/driver.h>
 #include <linux/mutex.h>
 
 #include "greybus.h"
@@ -39,11 +39,6 @@ struct gb_gpio_controller {
 
 	struct gpio_chip	chip;
 	struct irq_chip		irqc;
-	struct irq_chip		*irqchip;
-	struct irq_domain	*irqdomain;
-	unsigned int		irq_base;
-	irq_flow_handler_t	irq_handler;
-	unsigned int		irq_default_type;
 	struct mutex		irq_lock;
 };
 #define gpio_chip_to_gb_gpio_controller(chip) \
@@ -391,7 +386,7 @@ static int gb_gpio_request_handler(struct gb_operation *op)
 		return -EINVAL;
 	}
 
-	irq = irq_find_mapping(ggc->irqdomain, event->which);
+	irq = irq_find_mapping(ggc->chip.irq.domain, event->which);
 	if (!irq) {
 		dev_err(dev, "failed to find IRQ\n");
 		return -EINVAL;
@@ -506,135 +501,6 @@ static int gb_gpio_controller_setup(struct gb_gpio_controller *ggc)
 	return ret;
 }
 
-/**
- * gb_gpio_irq_map() - maps an IRQ into a GB gpio irqchip
- * @d: the irqdomain used by this irqchip
- * @irq: the global irq number used by this GB gpio irqchip irq
- * @hwirq: the local IRQ/GPIO line offset on this GB gpio
- *
- * This function will set up the mapping for a certain IRQ line on a
- * GB gpio by assigning the GB gpio as chip data, and using the irqchip
- * stored inside the GB gpio.
- */
-static int gb_gpio_irq_map(struct irq_domain *domain, unsigned int irq,
-			   irq_hw_number_t hwirq)
-{
-	struct gpio_chip *chip = domain->host_data;
-	struct gb_gpio_controller *ggc = gpio_chip_to_gb_gpio_controller(chip);
-
-	irq_set_chip_data(irq, ggc);
-	irq_set_chip_and_handler(irq, ggc->irqchip, ggc->irq_handler);
-	irq_set_noprobe(irq);
-	/*
-	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
-	 * is passed as default type.
-	 */
-	if (ggc->irq_default_type != IRQ_TYPE_NONE)
-		irq_set_irq_type(irq, ggc->irq_default_type);
-
-	return 0;
-}
-
-static void gb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
-{
-	irq_set_chip_and_handler(irq, NULL, NULL);
-	irq_set_chip_data(irq, NULL);
-}
-
-static const struct irq_domain_ops gb_gpio_domain_ops = {
-	.map	= gb_gpio_irq_map,
-	.unmap	= gb_gpio_irq_unmap,
-};
-
-/**
- * gb_gpio_irqchip_remove() - removes an irqchip added to a gb_gpio_controller
- * @ggc: the gb_gpio_controller to remove the irqchip from
- *
- * This is called only from gb_gpio_remove()
- */
-static void gb_gpio_irqchip_remove(struct gb_gpio_controller *ggc)
-{
-	unsigned int offset;
-
-	/* Remove all IRQ mappings and delete the domain */
-	if (ggc->irqdomain) {
-		for (offset = 0; offset < (ggc->line_max + 1); offset++)
-			irq_dispose_mapping(irq_find_mapping(ggc->irqdomain,
-							     offset));
-		irq_domain_remove(ggc->irqdomain);
-	}
-
-	if (ggc->irqchip)
-		ggc->irqchip = NULL;
-}
-
-/**
- * gb_gpio_irqchip_add() - adds an irqchip to a gpio chip
- * @chip: the gpio chip to add the irqchip to
- * @irqchip: the irqchip to add to the adapter
- * @first_irq: if not dynamically assigned, the base (first) IRQ to
- * allocate gpio irqs from
- * @handler: the irq handler to use (often a predefined irq core function)
- * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
- * to have the core avoid setting up any default type in the hardware.
- *
- * This function closely associates a certain irqchip with a certain
- * gpio chip, providing an irq domain to translate the local IRQs to
- * global irqs, and making sure that the gpio chip
- * is passed as chip data to all related functions. Driver callbacks
- * need to use container_of() to get their local state containers back
- * from the gpio chip passed as chip data. An irqdomain will be stored
- * in the gpio chip that shall be used by the driver to handle IRQ number
- * translation. The gpio chip will need to be initialized and registered
- * before calling this function.
- */
-static int gb_gpio_irqchip_add(struct gpio_chip *chip,
-			       struct irq_chip *irqchip,
-			       unsigned int first_irq,
-			       irq_flow_handler_t handler,
-			       unsigned int type)
-{
-	struct gb_gpio_controller *ggc;
-	unsigned int offset;
-	unsigned int irq_base;
-
-	if (!chip || !irqchip)
-		return -EINVAL;
-
-	ggc = gpio_chip_to_gb_gpio_controller(chip);
-
-	ggc->irqchip = irqchip;
-	ggc->irq_handler = handler;
-	ggc->irq_default_type = type;
-	ggc->irqdomain = irq_domain_add_simple(NULL,
-					       ggc->line_max + 1, first_irq,
-					       &gb_gpio_domain_ops, chip);
-	if (!ggc->irqdomain) {
-		ggc->irqchip = NULL;
-		return -EINVAL;
-	}
-
-	/*
-	 * Prepare the mapping since the irqchip shall be orthogonal to
-	 * any gpio calls. If the first_irq was zero, this is
-	 * necessary to allocate descriptors for all IRQs.
-	 */
-	for (offset = 0; offset < (ggc->line_max + 1); offset++) {
-		irq_base = irq_create_mapping(ggc->irqdomain, offset);
-		if (offset == 0)
-			ggc->irq_base = irq_base;
-	}
-
-	return 0;
-}
-
-static int gb_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct gb_gpio_controller *ggc = gpio_chip_to_gb_gpio_controller(chip);
-
-	return irq_find_mapping(ggc->irqdomain, offset);
-}
-
 static int gb_gpio_probe(struct gbphy_device *gbphy_dev,
 			 const struct gbphy_device_id *id)
 {
@@ -694,7 +560,6 @@ static int gb_gpio_probe(struct gbphy_device *gbphy_dev,
 	gpio->get = gb_gpio_get;
 	gpio->set = gb_gpio_set;
 	gpio->set_config = gb_gpio_set_config;
-	gpio->to_irq = gb_gpio_to_irq;
 	gpio->base = -1;		/* Allocate base dynamically */
 	gpio->ngpio = ggc->line_max + 1;
 	gpio->can_sleep = true;
@@ -703,24 +568,24 @@ static int gb_gpio_probe(struct gbphy_device *gbphy_dev,
 	if (ret)
 		goto exit_line_free;
 
-	ret = gb_gpio_irqchip_add(gpio, irqc, 0,
-				  handle_level_irq, IRQ_TYPE_NONE);
+	ret = gpiochip_add(gpio);
 	if (ret) {
-		dev_err(&gbphy_dev->dev, "failed to add irq chip: %d\n", ret);
+		dev_err(&gbphy_dev->dev, "failed to add gpio chip: %d\n", ret);
 		goto exit_line_free;
 	}
 
-	ret = gpiochip_add(gpio);
+	ret = gpiochip_irqchip_add(gpio, irqc, 0, handle_level_irq,
+				   IRQ_TYPE_NONE);
 	if (ret) {
-		dev_err(&gbphy_dev->dev, "failed to add gpio chip: %d\n", ret);
-		goto exit_gpio_irqchip_remove;
+		dev_err(&gbphy_dev->dev, "failed to add irq chip: %d\n", ret);
+		goto exit_gpiochip_remove;
 	}
 
 	gbphy_runtime_put_autosuspend(gbphy_dev);
 	return 0;
 
-exit_gpio_irqchip_remove:
-	gb_gpio_irqchip_remove(ggc);
+exit_gpiochip_remove:
+	gpiochip_remove(gpio);
 exit_line_free:
 	kfree(ggc->lines);
 exit_connection_disable:
@@ -744,7 +609,6 @@ static void gb_gpio_remove(struct gbphy_device *gbphy_dev)
 
 	gb_connection_disable_rx(connection);
 	gpiochip_remove(&ggc->chip);
-	gb_gpio_irqchip_remove(ggc);
 	gb_connection_disable(connection);
 	gb_connection_destroy(connection);
 	kfree(ggc->lines);