Merge prior defconfig changes into next/defconfig

These are from the next/boards branch, and we decided to split
out the defconfig changes now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -19,6 +19,9 @@ to deliver its interrupts via SPIs.
 
 - clock-frequency : The frequency of the main counter, in Hz. Optional.
 
+- always-on : a boolean property. If present, the timer is powered through an
+  always-on power domain, therefore it never loses context.
+
 Example:
 
 	timer {

Documentation/devicetree/bindings/ata/apm-xgene.txt

@@ -24,6 +24,7 @@ Required properties:
   * "sata-phy" for the SATA 6.0Gbps PHY
 
 Optional properties:
+- dma-coherent		: Present if dma operations are coherent
 - status		: Shall be "ok" if enabled or "disabled" if disabled.
 			  Default is "ok".
 
@@ -55,6 +56,7 @@ Example:
 			      <0x0 0x1f22e000 0x0 0x1000>,
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy2 0>;
@@ -69,6 +71,7 @@ Example:
 			      <0x0 0x1f23e000 0x0 0x1000>,
 			      <0x0 0x1f237000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy3 0>;

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

@@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 {
 	interrupt-names = "macirq";
 	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 	clocks = <&emac_0_clk>;
-	clocks-names = "stmmaceth";
+	clock-names = "stmmaceth";
 };

Documentation/devicetree/bindings/net/stmmac.txt

@@ -33,7 +33,7 @@ Optional properties:
 - max-frame-size: See ethernet.txt file in the same directory
 - clocks: If present, the first clock should be the GMAC main clock,
   further clocks may be specified in derived bindings.
-- clocks-names: One name for each entry in the clocks property, the
+- clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
 
 Examples:

Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt

@@ -83,7 +83,7 @@ Example:
 		reg 		= <0xfe61f080 0x4>;
 		reg-names	= "irqmux";
 		interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts-names = "irqmux";
+		interrupt-names	= "irqmux";
 		ranges 		= <0 0xfe610000 0x5000>;
 
 		PIO0: gpio@fe610000 {
@@ -165,7 +165,7 @@ sdhci0:sdhci@fe810000{
 	interrupt-parent = <&PIO3>;
 	#interrupt-cells = <2>;
 	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
-	interrupts-names = "card-detect";
+	interrupt-names = "card-detect";
 	pinctrl-names = "default";
 	pinctrl-0	= <&pinctrl_mmc>;
 };

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -47,7 +47,7 @@ mcasp0: mcasp0@1d00000 {
 	reg = <0x100000 0x3000>;
 	reg-names "mpu";
 	interrupts = <82>, <83>;
-	interrupts-names = "tx", "rx";
+	interrupt-names = "tx", "rx";
 	op-mode = <0>;		/* MCASP_IIS_MODE */
 	tdm-slots = <2>;
 	serial-dir = <

Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

@@ -13,6 +13,9 @@ Required properties:
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
 
 - reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
 
 
 Optional properties:
@@ -24,9 +27,6 @@ Optional properties:
         3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
 	If this node is not mentioned or if the value is unknown, then
 	micbias	is set to 2.0V.
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
-  DVDD-supply : power supplies for the device as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt
 
 CODEC output pins:
   * HPL

MAINTAINERS

@@ -3485,6 +3485,12 @@ S:	Maintained
 F:	drivers/extcon/
 F:	Documentation/extcon/
 
+EXYNOS DP DRIVER
+M:	Jingoo Han <jg1.han@samsung.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/exynos/exynos_dp*
+
 EXYNOS MIPI DISPLAY DRIVERS
 M:	Inki Dae <inki.dae@samsung.com>
 M:	Donghwa Lee <dh09.lee@samsung.com>
@@ -3550,7 +3556,7 @@ F:	include/scsi/libfcoe.h
 F:	include/uapi/scsi/fc/
 
 FILE LOCKING (flock() and fcntl()/lockf())
-M:	Jeff Layton <jlayton@redhat.com>
+M:	Jeff Layton <jlayton@poochiereds.net>
 M:	J. Bruce Fields <bfields@fieldses.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
@@ -5108,14 +5114,19 @@ F:	drivers/s390/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR ARM
 M:	Christoffer Dall <christoffer.dall@linaro.org>
+M:	Marc Zyngier <marc.zyngier@arm.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	kvmarm@lists.cs.columbia.edu
 W:	http://systems.cs.columbia.edu/projects/kvm-arm
 S:	Supported
 F:	arch/arm/include/uapi/asm/kvm*
 F:	arch/arm/include/asm/kvm*
 F:	arch/arm/kvm/
+F:	virt/kvm/arm/
+F:	include/kvm/arm_*
 
 KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
+M:	Christoffer Dall <christoffer.dall@linaro.org>
 M:	Marc Zyngier <marc.zyngier@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	kvmarm@lists.cs.columbia.edu

Makefile

 VERSION = 3
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arc/kernel/entry.S

@@ -614,11 +614,13 @@ resume_user_mode_begin:
 
 resume_kernel_mode:
 
-#ifdef CONFIG_PREEMPT
-
-	; This is a must for preempt_schedule_irq()
+	; Disable Interrupts from this point on
+	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
 	IRQ_DISABLE	r9
 
+#ifdef CONFIG_PREEMPT
+
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10
 	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]

arch/arm/Kconfig

@@ -30,9 +30,9 @@ config ARM
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
+	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_CC_STACKPROTECTOR
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
@@ -311,6 +311,7 @@ config ARCH_MULTIPLATFORM
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
@@ -422,8 +423,8 @@ config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on !MMU
 	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
 	select ARM_NVIC
+	select AUTO_ZRELADDR
 	select CLKSRC_OF
 	select COMMON_CLK
 	select CPU_V7M
@@ -511,8 +512,8 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
@@ -1110,9 +1111,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support" if !CPU_PJ4
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
+	bool "Enable iWMMXt support"
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1575,8 +1576,8 @@ config BIG_LITTLE
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
 	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select CPU_PM
 	select ARM_CPU_SUSPEND
+	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
 	  transparently handle transition between a cluster of A15's
@@ -1920,9 +1921,9 @@ config XEN
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
 	depends on MMU
+	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
 	select SWIOTLB_XEN
-	select ARCH_DMA_ADDR_T_64BIT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 

arch/arm/Kconfig.debug

@@ -1030,9 +1030,9 @@ config DEBUG_UART_PHYS
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
 	default 0x7c0003f8 if FOOTBRIDGE
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
+	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
@@ -1096,22 +1096,22 @@ config DEBUG_UART_VIRT
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
-	default 0xfed60000 if DEBUG_RK29_UART0
-	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
-	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
 	default 0xfed12000 if ARCH_KIRKWOOD
+	default 0xfed60000 if DEBUG_RK29_UART0
+	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfedc0000 if ARCH_EP93XX
 	default 0xfee003f8 if FOOTBRIDGE
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfee82340 if ARCH_IOP13XX
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefff700 if ARCH_IOP33X
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU

arch/arm/boot/dts/Makefile

@@ -51,10 +51,9 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
 
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb	\
 	berlin2cd-google-chromecast.dtb
@@ -246,6 +245,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-sbc-t3730.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
+	omap3-beagle-xm-ab.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-ldp.dtb \
@@ -294,13 +294,6 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
@@ -369,9 +362,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
 	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -183,7 +183,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -204,7 +204,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-evm.dts

@@ -301,8 +301,8 @@
 
 	am335x_evm_audio_pins: am335x_evm_audio_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
@@ -331,7 +331,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -352,7 +352,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-evmsk.dts

@@ -364,7 +364,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -385,7 +385,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -118,7 +118,6 @@
 		reg = <0 0 0>; /* CS0, offset 0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -202,7 +201,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -223,7 +222,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am33xx.dtsi

@@ -72,7 +72,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -94,8 +94,8 @@
 
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex.Since
-	 * that will not bring real advantage to represent that in DT
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
 	 * for the moment, just use a fake OCP bus entry to represent
 	 * the whole bus hierarchy.
 	 */
@@ -802,7 +802,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 				<&edma 9>;
@@ -816,7 +816,7 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 				<&edma 11>;

arch/arm/boot/dts/am4372.dtsi

@@ -691,7 +691,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 			       <&edma 9>;
@@ -705,7 +705,7 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 			       <&edma 11>;

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -230,6 +230,7 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
 			};
 
 			eth1: ethernet@74000 {

arch/arm/boot/dts/armada-38x.dtsi

@@ -336,6 +336,7 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
 			};
 
 			coredivclk: clock@e4250 {

arch/arm/boot/dts/dra7.dtsi

@@ -80,7 +80,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -94,7 +94,7 @@
 	/*
 	 * XXX: Use a flat representation of the SOC interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -1640,7 +1640,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
+		ti,bit-shift = <24>;
 		reg = <0x1860>;
 	};
 

arch/arm/boot/dts/imx25.dtsi

@@ -56,6 +56,7 @@
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};

arch/arm/boot/dts/imx27-apf27.dts

@@ -29,6 +29,7 @@
 
 		osc26m {
 			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 	};

arch/arm/boot/dts/imx27.dtsi

@@ -48,6 +48,7 @@
 
 		osc26m {
 			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <26000000>;
 		};
 	};

arch/arm/boot/dts/imx50.dtsi

@@ -53,21 +53,25 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
 			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};

arch/arm/boot/dts/imx51.dtsi

@@ -50,21 +50,25 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
 			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};

arch/arm/boot/dts/imx53-m53evk.dts

@@ -17,7 +17,8 @@
 	compatible = "denx,imx53-m53evk", "fsl,imx53";
 
 	memory {
-		reg = <0x70000000 0x20000000>;
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
 	};
 
 	soc {
@@ -193,17 +194,17 @@
 		irq-trigger = <0x1>;
 
 		stmpe_touchscreen {
-			compatible = "stmpe,ts";
+			compatible = "st,stmpe-ts";
 			reg = <0>;
-			ts,sample-time = <4>;
-			ts,mod-12b = <1>;
-			ts,ref-sel = <0>;
-			ts,adc-freq = <1>;
-			ts,ave-ctrl = <3>;
-			ts,touch-det-delay = <3>;
-			ts,settling = <4>;
-			ts,fraction-z = <7>;
-			ts,i-drive = <1>;
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
 		};
 	};
 

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -14,7 +14,8 @@
 
 / {
 	memory {
-		reg = <0x70000000 0x40000000>;
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
 	};
 
 	display0: display@di0 {

arch/arm/boot/dts/imx53-tx53-x03x.dts

@@ -25,12 +25,17 @@
 	soc {
 		display: display@di0 {
 			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 0>;
 			interface-pix-fmt = "rgb24";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_rgb24_vga1>;
 			status = "okay";
 
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu_di0_disp0>;
+				};
+			};
+
 			display-timings {
 				VGA {
 					clock-frequency = <25200000>;
@@ -293,6 +298,10 @@
 	};
 };
 
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
 &kpp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_kpp>;

arch/arm/boot/dts/imx53.dtsi

@@ -70,21 +70,25 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
 			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -430,7 +434,7 @@
 
 					port {
 						lvds1_in: endpoint {
-							remote-endpoint = <&ipu_di0_lvds0>;
+							remote-endpoint = <&ipu_di1_lvds1>;
 						};
 					};
 				};

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -19,7 +19,10 @@
 	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
 
 	aliases {
-		gpio7 = &stmpe_gpio;
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
 	};
 
 	memory {
@@ -40,13 +43,15 @@
 			regulator-always-on;
 		};
 
-		reg_usb_otg_vbus: regulator@1 {
+		reg_usb_otg_switch: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "usb_otg_vbus";
+			regulator-name = "usb_otg_switch";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		reg_usb_host1: regulator@2 {
@@ -65,23 +70,23 @@
 
 		led-blue {
 			label = "blue";
-			gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-green {
 			label = "green";
-			gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		led-pink {
 			label = "pink";
-			gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
 
 		led-red {
 			label = "red";
-			gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
@@ -99,7 +104,8 @@
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe>;
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2>;
 	status = "okay";
 
 	pmic: pfuze100@08 {
@@ -205,13 +211,25 @@
 		};
 	};
 
-	stmpe: stmpe1601@40 {
+	stmpe1: stmpe1601@40 {
 		compatible = "st,stmpe1601";
 		reg = <0x40>;
 		interrupts = <30 0>;
 		interrupt-parent = <&gpio3>;
 
-		stmpe_gpio: stmpe_gpio {
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+
+		stmpe_gpio2: stmpe_gpio {
 			#gpio-cells = <2>;
 			compatible = "st,stmpe-gpio";
 		};
@@ -273,10 +291,14 @@
 			>;
 		};
 
-		pinctrl_stmpe: stmpegrp {
+		pinctrl_stmpe1: stmpe1grp {
 			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 		};
 
+		pinctrl_stmpe2: stmpe2grp {
+			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -293,7 +315,7 @@
 
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
 			>;
 		};
 
@@ -344,11 +366,11 @@
 &usbh1 {
 	vbus-supply = <&reg_usb_host1>;
 	disable-over-current;
+	dr_mode = "host";
 	status = "okay";
 };
 
 &usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -487,9 +487,6 @@
 
 &ldb {
 	status = "okay";
-	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-	};
 };
 
 &pcie {

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -436,9 +436,6 @@
 
 &ldb {
 	status = "okay";
-	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-	};
 };
 
 &pcie {

arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi

@@ -26,25 +26,25 @@
 				/* GPIO16 -> AR8035 25MHz */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
 				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 
 				/*
 				 * As the RMII pins are also connected to RGMII

arch/arm/boot/dts/imx6qdl.dtsi

@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -46,8 +48,6 @@
 	intc: interrupt-controller@00a01000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
@@ -59,16 +59,19 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -138,6 +141,12 @@
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
 			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
 			status = "disabled";

arch/arm/boot/dts/imx6sl-evk.dts

@@ -282,6 +282,7 @@
 				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
 				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
 				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
 			>;
 		};
 

arch/arm/boot/dts/imx6sl.dtsi

@@ -68,8 +68,6 @@
 	intc: interrupt-controller@00a01000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
@@ -81,11 +79,13 @@
 
 		ckil {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		osc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};

arch/arm/boot/dts/kirkwood-b3.dts

@@ -75,7 +75,7 @@
 			m25p16@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "m25p16";
+				compatible = "st,m25p16";
 				reg = <0>;
 				spi-max-frequency = <40000000>;
 				mode = <0>;

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -46,7 +46,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l4005a";
+				compatible = "mxicy,mx25l4005a";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -43,7 +43,7 @@
 			m25p40@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l1606e";
+				compatible = "mxicy,mx25l1606e";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;

arch/arm/boot/dts/kirkwood-laplug.dts

@@ -48,7 +48,7 @@
 			status = "okay";
 
 			eeprom@50 {
-				compatible = "at,24c04";
+				compatible = "atmel,24c04";
 				pagesize = <16>;
 				reg = <0x50>;
 			};

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -56,7 +56,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l12805d";
+				compatible = "mxicy,mx25l12805d";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -32,7 +32,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l4005a";
+				compatible = "mxicy,mx25l4005a";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
@@ -50,7 +50,7 @@
 			status = "okay";
 
 			eeprom@50 {
-				compatible = "at,24c04";
+				compatible = "atmel,24c04";
 				pagesize = <16>;
 				reg = <0x50>;
 			};

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -104,7 +104,7 @@
 			status = "okay";
 
 			adt7476: adt7476a@2e {
-				compatible = "adt7476";
+				compatible = "adi,adt7476";
 				reg = <0x2e>;
 			};
 		};

arch/arm/boot/dts/kirkwood-nsa310a.dts

@@ -94,7 +94,7 @@
 			status = "okay";
 
 			lm85: lm85@2e {
-				compatible = "lm85";
+				compatible = "national,lm85";
 				reg = <0x2e>;
 			};
 		};

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -40,7 +40,7 @@
 			pinctrl-names = "default";
 
 			s35390a: s35390a@30 {
-				compatible = "s35390a";
+				compatible = "sii,s35390a";
 				reg = <0x30>;
 			};
 		};

arch/arm/boot/dts/kirkwood-openblocks_a7.dts

@@ -52,7 +52,7 @@
 			pinctrl-names = "default";
 
 			s24c02: s24c02@50 {
-				compatible = "24c02";
+				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
 		};

arch/arm/boot/dts/omap3-beagle-xm-ab.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -112,7 +112,6 @@
 		reg = <0 0 0>; /* CS0, offset 0 */
 		nand-bus-width = <16>;
 
-		gpmc,device-nand;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;

arch/arm/boot/dts/omap3-lilly-a83x.dtsi

@@ -368,7 +368,6 @@
 		/* no elm on omap3 */
 
 		gpmc,mux-add-data = <0>;
-		gpmc,device-nand;
 		gpmc,device-width = <2>;
 		gpmc,wait-pin = <0>;
 		gpmc,wait-monitoring-ns = <0>;

arch/arm/boot/dts/omap3.dtsi

@@ -74,7 +74,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */

arch/arm/boot/dts/omap4.dtsi

@@ -72,7 +72,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -96,7 +96,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */

arch/arm/boot/dts/omap5.dtsi

@@ -93,7 +93,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -107,7 +107,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
@@ -813,6 +813,12 @@
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_usb3phy>;
+				clocks = <&usb_phy_cm_clk32k>,
+					 <&sys_clkin>,
+					 <&usb_otg_ss_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
 				#phy-cells = <0>;
 			};
 		};

arch/arm/boot/dts/r8a7740.dtsi

@@ -28,7 +28,6 @@
 	gic: interrupt-controller@c2800000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0xc2800000 0x1000>,
 		      <0xc2000000 0x1000>;

arch/arm/boot/dts/r8a7790-lager.dts

@@ -141,12 +141,12 @@
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
 		renesas,function = "sdhi0";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
 		renesas,function = "sdhi2";
 	};
 

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -230,17 +230,17 @@
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
 		renesas,function = "sdhi0";
 	};
 
 	sdhi1_pins: sd1 {
-		renesas,gpios = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
 		renesas,function = "sdhi1";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
 		renesas,function = "sdhi2";
 	};
 

arch/arm/boot/dts/rk3188.dtsi

@@ -149,7 +149,7 @@
 
 			uart0 {
 				uart0_xfer: uart0-xfer {
-					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
 				};
 
@@ -164,7 +164,7 @@
 
 			uart1 {
 				uart1_xfer: uart1-xfer {
-					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
 				};
 
@@ -179,7 +179,7 @@
 
 			uart2 {
 				uart2_xfer: uart2-xfer {
-					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
 				};
 				/* no rts / cts for uart2 */
@@ -187,7 +187,7 @@
 
 			uart3 {
 				uart3_xfer: uart3-xfer {
-					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
 				};
 

arch/arm/boot/dts/sh73a0.dtsi

@@ -34,7 +34,6 @@
 	gic: interrupt-controller@f0001000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0xf0001000 0x1000>,
 		      <0xf0000100 0x100>;

arch/arm/boot/dts/stih415-pinctrl.dtsi

@@ -49,7 +49,7 @@
 			reg 		= <0xfe61f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe610000 0x5000>;
 
 			PIO0: gpio@fe610000 {
@@ -187,7 +187,7 @@
 			reg 		= <0xfee0f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x8000>;
 
 			PIO5: gpio@fee00000 {
@@ -282,7 +282,7 @@
 			reg 		= <0xfe82f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe820000 0x8000>;
 
 			PIO13: gpio@fe820000 {
@@ -423,7 +423,7 @@
 			reg 		= <0xfd6bf080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
@@ -460,7 +460,7 @@
 			reg 		= <0xfd33f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -53,7 +53,7 @@
 			reg 		= <0xfe61f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe610000 0x6000>;
 
 			PIO0: gpio@fe610000 {
@@ -201,7 +201,7 @@
 			reg 		= <0xfee0f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x10000>;
 
 			PIO5: gpio@fee00000 {
@@ -333,7 +333,7 @@
 			reg 		= <0xfe82f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe820000 0x6000>;
 
 			PIO13: gpio@fe820000 {
@@ -461,7 +461,7 @@
 			reg 		= <0xfd6bf080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
@@ -498,7 +498,7 @@
 			reg 		= <0xfd33f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges			= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {

arch/arm/boot/dts/tegra124.dtsi

@@ -233,19 +233,6 @@
 		status = "disabled";
 	};
 
-	serial@0,70006400 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006400 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
 	pwm@0,7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;

arch/arm/boot/dts/vf610-twr.dts

@@ -25,11 +25,13 @@
 	clocks {
 		audio_ext {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24576000>;
 		};
 
 		enet_ext {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <50000000>;
 		};
 	};

arch/arm/boot/dts/vf610.dtsi

@@ -45,11 +45,13 @@
 
 		sxosc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		fxosc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -72,8 +74,6 @@
 			intc: interrupt-controller@40002000 {
 				compatible = "arm,cortex-a9-gic";
 				#interrupt-cells = <3>;
-				#address-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				reg = <0x40003000 0x1000>,
 				      <0x40002100 0x100>;

arch/arm/boot/dts/zynq-7000.dtsi

@@ -24,6 +24,7 @@
 			device_type = "cpu";
 			reg = <0>;
 			clocks = <&clkc 3>;
+			clock-latency = <1000>;
 			operating-points = <
 				/* kHz    uV */
 				666667  1000000
@@ -54,6 +55,28 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		i2c0: zynq-i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: zynq-i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;

arch/arm/boot/dts/zynq-zc702.dts

@@ -34,6 +34,82 @@
 	phy-mode = "rgmii";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@52 {
+				compatible = "ti,ucd9248";
+				reg = <52>;
+			};
+			hwmon@53 {
+				compatible = "ti,ucd9248";
+				reg = <53>;
+			};
+			hwmon@54 {
+				compatible = "ti,ucd9248";
+				reg = <54>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
 };

arch/arm/boot/dts/zynq-zc706.dts

@@ -35,6 +35,74 @@
 	phy-mode = "rgmii";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
 };

arch/arm/common/bL_switcher.c

@@ -797,10 +797,8 @@ static int __init bL_switcher_init(void)
 {
 	int ret;
 
-	if (MAX_NR_CLUSTERS != 2) {
-		pr_err("%s: only dual cluster systems are supported\n", __func__);
-		return -EINVAL;
-	}
+	if (!mcpm_is_available())
+		return -ENODEV;
 
 	cpu_notifier(bL_switcher_hotplug_callback, 0);
 

arch/arm/common/mcpm_entry.c

@@ -48,6 +48,11 @@ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
 	return 0;
 }
 
+bool mcpm_is_available(void)
+{
+	return (platform_ops) ? true : false;
+}
+
 int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
 {
 	if (!platform_ops)

arch/arm/configs/multi_v7_defconfig

@@ -20,6 +20,7 @@ CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
+CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HI3xxx=y
@@ -112,6 +113,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -191,6 +193,7 @@ CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_GPIO_PALMAS=y

arch/arm/configs/omap2plus_defconfig

@@ -226,7 +226,7 @@ CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y
-CONFIG_OMAP_USB3=y
+CONFIG_TI_PIPE3=y
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y

arch/arm/configs/shmobile_defconfig

@@ -25,6 +25,7 @@ CONFIG_SCHED_MC=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -43,6 +44,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
+CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_RCAR=y
@@ -75,9 +77,11 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C_GPIO=y
+CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
@@ -88,10 +92,14 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_PLATFORM=y
 CONFIG_VIDEO_RCAR_VIN=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_VSP1=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
 CONFIG_DRM=y
@@ -100,7 +108,13 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_RCAR=y
+CONFIG_USB=y
 CONFIG_USB_RCAR_GEN2_PHY=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y

arch/arm/configs/tegra_defconfig

@@ -73,6 +73,11 @@ CONFIG_INET6_IPCOMP=y
 CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -90,6 +95,7 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_AD525X_DPOT=y
@@ -97,6 +103,7 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
@@ -112,6 +119,7 @@ CONFIG_USB_NET_SMSC95XX=y
 CONFIG_BRCMFMAC=m
 CONFIG_RT2X00=y
 CONFIG_RT2800USB=m
+CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
@@ -181,6 +189,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -222,6 +231,7 @@ CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TPS6586X=y

arch/arm/configs/u300_defconfig

@@ -11,6 +11,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_U300=y
@@ -21,7 +22,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
@@ -64,8 +64,8 @@ CONFIG_TMPFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y

arch/arm/configs/u8500_defconfig

 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_UX500_DT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
@@ -34,16 +34,22 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_PHONET=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEBUGFS=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
+CONFIG_CW1200=y
+CONFIG_CW1200_WLAN_SDIO=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -85,15 +91,12 @@ CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LP5521=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -103,6 +106,11 @@ CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_HSEM_U8500=y
+CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=y
+CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_IIO_ST_MAGN_3AXIS=y
+CONFIG_IIO_ST_PRESS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -110,8 +118,6 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set

arch/arm/include/asm/cputype.h

@@ -222,22 +222,22 @@ static inline int cpu_is_xsc3(void)
 #endif
 
 /*
- * Marvell's PJ4 core is based on V7 version. It has some modification
- * for coprocessor setting. For this reason, we need a way to distinguish
- * it.
+ * Marvell's PJ4 and PJ4B cores are based on V7 version,
+ * but require a specical sequence for enabling coprocessors.
+ * For this reason, we need a way to distinguish them.
  */
-#ifndef CONFIG_CPU_PJ4
-#define cpu_is_pj4()	0
-#else
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 static inline int cpu_is_pj4(void)
 {
 	unsigned int id;
 
 	id = read_cpuid_id();
-	if ((id & 0xfffffff0) == 0x562f5840)
+	if ((id & 0xff0fff00) == 0x560f5800)
 		return 1;
 
 	return 0;
 }
+#else
+#define cpu_is_pj4()	0
 #endif
 #endif

arch/arm/include/asm/div64.h

@@ -156,7 +156,7 @@
 		/* Select the best insn combination to perform the   */	\
 		/* actual __m * __n / (__p << 64) operation.         */	\
 		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
 				: "=&r" (__res)				\
 				: "r" (__m), "r" (__n)			\

arch/arm/include/asm/mcpm.h

@@ -53,6 +53,13 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
  * CPU/cluster power operations API for higher subsystems to use.
  */
 
+/**
+ * mcpm_is_available - returns whether MCPM is initialized and available
+ *
+ * This returns true or false accordingly.
+ */
+bool mcpm_is_available(void);
+
 /**
  * mcpm_cpu_power_up - make given CPU in given cluster runable
  *

arch/arm/include/asm/tlb.h

@@ -98,15 +98,25 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 	}
 }
 
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
 {
 	tlb_flush(tlb);
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
 	free_pages_and_swap_cache(tlb->pages, tlb->nr);
 	tlb->nr = 0;
 	if (tlb->pages == tlb->local)
 		__tlb_alloc_page(tlb);
 }
 
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+	tlb_flush_mmu_tlbonly(tlb);
+	tlb_flush_mmu_free(tlb);
+}
+
 static inline void
 tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {

arch/arm/include/uapi/asm/unistd.h

@@ -408,6 +408,7 @@
 #define __NR_finit_module		(__NR_SYSCALL_BASE+379)
 #define __NR_sched_setattr		(__NR_SYSCALL_BASE+380)
 #define __NR_sched_getattr		(__NR_SYSCALL_BASE+381)
+#define __NR_renameat2			(__NR_SYSCALL_BASE+382)
 
 /*
  * This may need to be greater than __NR_last_syscall+1 in order to

arch/arm/kernel/Makefile

@@ -79,6 +79,7 @@ obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
+obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o

arch/arm/kernel/calls.S

@@ -391,6 +391,7 @@
 		CALL(sys_finit_module)
 /* 380 */	CALL(sys_sched_setattr)
 		CALL(sys_sched_getattr)
+		CALL(sys_renameat2)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/head.S

@@ -587,7 +587,7 @@ __fixup_pv_table:
 	add	r6, r6, r3	@ adjust __pv_phys_pfn_offset address
 	add	r7, r7, r3	@ adjust __pv_offset address
 	mov	r0, r8, lsr #12	@ convert to PFN
-	str	r0, [r6, #LOW_OFFSET]	@ save computed PHYS_OFFSET to __pv_phys_pfn_offset
+	str	r0, [r6]	@ save computed PHYS_OFFSET to __pv_phys_pfn_offset
 	strcc	ip, [r7, #HIGH_OFFSET]	@ save to __pv_offset high bits
 	mov	r6, r3, lsr #24	@ constant for add/sub instructions
 	teq	r3, r6, lsl #24 @ must be 16MiB aligned

arch/arm/kernel/iwmmxt.S

@@ -19,12 +19,16 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 
-#if defined(CONFIG_CPU_PJ4)
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 #define PJ4(code...)		code
 #define XSC(code...)
-#else
+#elif defined(CONFIG_CPU_MOHAWK) || \
+	defined(CONFIG_CPU_XSC3) || \
+	defined(CONFIG_CPU_XSCALE)
 #define PJ4(code...)
 #define XSC(code...)		code
+#else
+#error "Unsupported iWMMXt architecture"
 #endif
 
 #define MMX_WR0		 	(0x00)

arch/arm/kernel/machine_kexec.c

@@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image)
 
 	soft_restart(reboot_entry_phys);
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+	VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}

arch/arm/kernel/pj4-cp0.c

@@ -45,7 +45,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block iwmmxt_notifier_block = {
+static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
 	.notifier_call	= iwmmxt_do,
 };
 
@@ -72,6 +72,33 @@ static void __init pj4_cp_access_write(u32 value)
 		: "=r" (temp) : "r" (value));
 }
 
+static int __init pj4_get_iwmmxt_version(void)
+{
+	u32 cp_access, wcid;
+
+	cp_access = pj4_cp_access_read();
+	pj4_cp_access_write(cp_access | 0xf);
+
+	/* check if coprocessor 0 and 1 are available */
+	if ((pj4_cp_access_read() & 0xf) != 0xf) {
+		pj4_cp_access_write(cp_access);
+		return -ENODEV;
+	}
+
+	/* read iWMMXt coprocessor id register p1, c0 */
+	__asm__ __volatile__ ("mrc    p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
+
+	pj4_cp_access_write(cp_access);
+
+	/* iWMMXt v1 */
+	if ((wcid & 0xffffff00) == 0x56051000)
+		return 1;
+	/* iWMMXt v2 */
+	if ((wcid & 0xffffff00) == 0x56052000)
+		return 2;
+
+	return -EINVAL;
+}
 
 /*
  * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
@@ -79,17 +106,26 @@ static void __init pj4_cp_access_write(u32 value)
  */
 static int __init pj4_cp0_init(void)
 {
-	u32 cp_access;
+	u32 __maybe_unused cp_access;
+	int vers;
 
 	if (!cpu_is_pj4())
 		return 0;
 
+	vers = pj4_get_iwmmxt_version();
+	if (vers < 0)
+		return 0;
+
+#ifndef CONFIG_IWMMXT
+	pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
+#else
 	cp_access = pj4_cp_access_read() & ~0xf;
 	pj4_cp_access_write(cp_access);
 
-	printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
 	elf_hwcap |= HWCAP_IWMMXT;
 	thread_register_notifier(&iwmmxt_notifier_block);
+#endif
 
 	return 0;
 }

arch/arm/kernel/sys_oabi-compat.c

@@ -203,9 +203,9 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	int ret;
 
 	switch (cmd) {
-	case F_GETLKP:
-	case F_SETLKP:
-	case F_SETLKPW:
+	case F_OFD_GETLK:
+	case F_OFD_SETLK:
+	case F_OFD_SETLKW:
 	case F_GETLK64:
 	case F_SETLK64:
 	case F_SETLKW64:

arch/arm/kvm/Kconfig

@@ -23,7 +23,7 @@ config KVM
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_ARM_HOST
-	depends on ARM_VIRT_EXT && ARM_LPAE
+	depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN
 	---help---
 	  Support hosting virtualized guest machines. You will also
 	  need to select one or more of the processor modules below.

arch/arm/kvm/mmu.c

@@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
+
 #define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
@@ -293,14 +295,14 @@ void free_boot_hyp_pgd(void)
 	if (boot_hyp_pgd) {
 		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
-		kfree(boot_hyp_pgd);
+		free_pages((unsigned long)boot_hyp_pgd, pgd_order);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd)
 		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 
-	kfree(init_bounce_page);
+	free_page((unsigned long)init_bounce_page);
 	init_bounce_page = NULL;
 
 	mutex_unlock(&kvm_hyp_pgd_mutex);
@@ -330,7 +332,7 @@ void free_hyp_pgds(void)
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
 			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
 
-		kfree(hyp_pgd);
+		free_pages((unsigned long)hyp_pgd, pgd_order);
 		hyp_pgd = NULL;
 	}
 
@@ -1024,7 +1026,7 @@ int kvm_mmu_init(void)
 		size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
 		phys_addr_t phys_base;
 
-		init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		init_bounce_page = (void *)__get_free_page(GFP_KERNEL);
 		if (!init_bounce_page) {
 			kvm_err("Couldn't allocate HYP init bounce page\n");
 			err = -ENOMEM;
@@ -1050,8 +1052,9 @@ int kvm_mmu_init(void)
 			 (unsigned long)phys_base);
 	}
 
-	hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
-	boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
+	hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+	boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+
 	if (!hyp_pgd || !boot_hyp_pgd) {
 		kvm_err("Hyp mode PGD not allocated\n");
 		err = -ENOMEM;

arch/arm/mach-at91/at91sam9260_devices.c

@@ -1296,7 +1296,7 @@ static struct resource adc_resources[] = {
 };
 
 static struct platform_device at91_adc_device = {
-	.name		= "at91_adc",
+	.name		= "at91sam9260-adc",
 	.id		= -1,
 	.dev		= {
 				.platform_data		= &adc_data,

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1204,7 +1204,7 @@ static struct resource adc_resources[] = {
 };
 
 static struct platform_device at91_adc_device = {
-	.name		= "at91_adc",
+	.name		= "at91sam9g45-adc",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &adc_data,

arch/arm/mach-imx/clk-imx6q.c

@@ -208,8 +208,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * the "output_enable" bit as a gate, even though it's really just
 	 * enabling clock output.
 	 */
-	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
-	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
 
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
@@ -258,14 +258,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
 	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
 	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di0_sel]     = imx_clk_mux("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels));
-	clk[ipu1_di1_sel]     = imx_clk_mux("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels));
-	clk[ipu2_di0_sel]     = imx_clk_mux("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels));
-	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
+	clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di0_sel]     = imx_clk_mux_flags("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_sel]     = imx_clk_mux_flags("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_sel]     = imx_clk_mux_flags("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_sel]     = imx_clk_mux_flags("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
 	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
@@ -445,6 +445,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
 
+	clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
+	clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
+	clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
+	clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.

arch/arm/mach-omap2/board-rx51-video.c

@@ -48,7 +48,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
 
 static int __init rx51_video_init(void)
 {
-	if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
+	if (!machine_is_nokia_rx51())
 		return 0;
 
 	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {

arch/arm/mach-omap2/clkt_dpll.c

@@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return 1;
-	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return __clk_get_rate(dd->clk_bypass);
-	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)

arch/arm/mach-omap2/gpmc.c

@@ -501,7 +501,7 @@ static int gpmc_cs_delete_mem(int cs)
 	int r;
 
 	spin_lock(&gpmc_mem_lock);
-	r = release_resource(&gpmc_cs_mem[cs]);
+	r = release_resource(res);
 	res->start = 0;
 	res->end = 0;
 	spin_unlock(&gpmc_mem_lock);
@@ -527,6 +527,14 @@ static int gpmc_cs_remap(int cs, u32 base)
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
+
+	/*
+	 * Make sure we ignore any device offsets from the GPMC partition
+	 * allocated for the chip select and that the new base confirms
+	 * to the GPMC 16MB minimum granularity.
+	 */ 
+	base &= ~(SZ_16M - 1);
+
 	gpmc_cs_get_memconf(cs, &old_base, &size);
 	if (base == old_base)
 		return 0;
@@ -586,6 +594,8 @@ EXPORT_SYMBOL(gpmc_cs_request);
 
 void gpmc_cs_free(int cs)
 {
+	struct resource	*res = &gpmc_cs_mem[cs];
+
 	spin_lock(&gpmc_mem_lock);
 	if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
 		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
@@ -594,7 +604,8 @@ void gpmc_cs_free(int cs)
 		return;
 	}
 	gpmc_cs_disable_mem(cs);
-	release_resource(&gpmc_cs_mem[cs]);
+	if (res->flags)
+		release_resource(res);
 	gpmc_cs_set_reserved(cs, 0);
 	spin_unlock(&gpmc_mem_lock);
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -2546,11 +2546,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 		return -EINVAL;
 	}
 
-	if (np)
+	if (np) {
 		if (of_find_property(np, "ti,no-reset-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_RESET;
 		if (of_find_property(np, "ti,no-idle-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_IDLE;
+	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1964,7 +1964,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
 static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	.name		= "usb_host_hs",
 	.class		= &omap3xxx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
+	.clkdm_name	= "usbhost_clkdm",
 	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
 	.main_clk	= "usbhost_48m_fck",
 	.prcm = {
@@ -2047,7 +2047,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
 static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
 	.name		= "usb_tll_hs",
 	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
+	.clkdm_name	= "core_l4_clkdm",
 	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
 	.main_clk	= "usbtll_fck",
 	.prcm = {

arch/arm/mach-omap2/pm34xx.c

@@ -330,10 +330,6 @@ void omap_sram_idle(void)
 			omap3_sram_restore_context();
 			omap2_sms_restore_context();
 		}
-		if (core_next_state == PWRDM_POWER_OFF)
-			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
-					       OMAP3430_GR_MOD,
-					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
 	omap3_intc_resume_idle();
 

arch/arm/mach-pxa/include/mach/hx4700.h

@@ -14,6 +14,7 @@
 
 #include <linux/gpio.h>
 #include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
 
 #define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)