MIPS: Alchemy: use the OHCI platform driver

Convert the Alchemy platform to register the ohci-platform driver, now that
the ohci-platform driver properly handles the specific ohci-au1xxx resume
from suspend case.

This also greatly simplifies the power_{on,off} callbacks and make them
work on platform device id instead of checking the OHCI controller base
address like what was done in ohci-au1xxx.c.

Impacted defconfigs are also updated accordingly to select the OHCI platform
driver.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/mips/alchemy/common/platform.c

@@ -18,6 +18,7 @@
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
 #include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -142,6 +143,34 @@ static struct usb_ehci_pdata alchemy_ehci_pdata = {
 	.power_suspend	= alchemy_ehci_power_off,
 };
 
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+	.power_on		= alchemy_ohci_power_on,
+	.power_off		= alchemy_ohci_power_off,
+	.power_suspend		= alchemy_ohci_power_off,
+};
+
 static unsigned long alchemy_ohci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
@@ -189,9 +218,10 @@ static void __init alchemy_setup_usb(int ctype)
 	res[1].start = alchemy_ohci_data[ctype][1];
 	res[1].end = res[1].start;
 	res[1].flags = IORESOURCE_IRQ;
-	pdev->name = "au1xxx-ohci";
+	pdev->name = "ohci-platform";
 	pdev->id = 0;
 	pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+	pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 	if (platform_device_register(pdev))
 		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
@@ -228,9 +258,10 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].start = AU1300_USB_INT;
 		res[1].end = res[1].start;
 		res[1].flags = IORESOURCE_IRQ;
-		pdev->name = "au1xxx-ohci";
+		pdev->name = "ohci-platform";
 		pdev->id = 1;
 		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+		pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");

arch/mips/configs/db1000_defconfig

@@ -233,6 +233,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y

arch/mips/configs/gpr_defconfig

@@ -291,6 +291,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=m
 CONFIG_USB_LIBUSUAL=y
 CONFIG_USB_SERIAL=y

arch/mips/configs/mtx1_defconfig

@@ -581,6 +581,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_UHCI_HCD=m
 CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m