regulator: mp886x: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Message-Id: <20210525102708.2519323-1-axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@sirena.org.uk>

drivers/regulator/mp886x.c

@@ -26,7 +26,7 @@
 
 struct mp886x_cfg_info {
 	const struct regulator_ops *rops;
-	const int slew_rates[8];
+	const unsigned int slew_rates[8];
 	const int switch_freq[4];
 	const u8 fs_reg;
 	const u8 fs_shift;
@@ -42,28 +42,6 @@ struct mp886x_device_info {
 	unsigned int sel;
 };
 
-static int mp886x_set_ramp(struct regulator_dev *rdev, int ramp)
-{
-	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
-	const struct mp886x_cfg_info *ci = di->ci;
-	int reg = -1, i;
-
-	for (i = 0; i < ARRAY_SIZE(ci->slew_rates); i++) {
-		if (ramp <= ci->slew_rates[i])
-			reg = i;
-		else
-			break;
-	}
-
-	if (reg < 0) {
-		dev_err(di->dev, "unsupported ramp value %d\n", ramp);
-		return -EINVAL;
-	}
-
-	return regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
-				  MP886X_SLEW_MASK, reg << MP886X_SLEW_SHIFT);
-}
-
 static void mp886x_set_switch_freq(struct mp886x_device_info *di,
 				   struct regmap *regmap,
 				   u32 freq)
@@ -169,7 +147,7 @@ static const struct regulator_ops mp8869_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
-	.set_ramp_delay = mp886x_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 static const struct mp886x_cfg_info mp8869_ci = {
@@ -248,7 +226,7 @@ static const struct regulator_ops mp8867_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
-	.set_ramp_delay = mp886x_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 static const struct mp886x_cfg_info mp8867_ci = {
@@ -290,6 +268,10 @@ static int mp886x_regulator_register(struct mp886x_device_info *di,
 	rdesc->uV_step = 10000;
 	rdesc->vsel_reg = MP886X_VSEL;
 	rdesc->vsel_mask = 0x3f;
+	rdesc->ramp_reg = MP886X_SYSCNTLREG1;
+	rdesc->ramp_mask = MP886X_SLEW_MASK;
+	rdesc->ramp_delay_table = di->ci->slew_rates;
+	rdesc->n_ramp_values = ARRAY_SIZE(di->ci->slew_rates);
 	rdesc->owner = THIS_MODULE;
 
 	rdev = devm_regulator_register(di->dev, &di->desc, config);