提交 e181dce8 编写于 作者: M Marc Pignat 提交者: Pierre Ossman

mmc: at91_mci: show timeouts

Detect command timeout (or mci controller hangs).
Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch>
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
上级 80f92546
......@@ -125,8 +125,33 @@ struct at91mci_host
/* Latest in the scatterlist that has been enabled for transfer */
int transfer_index;
/* Timer for timeouts */
struct timer_list timer;
};
static void at91_timeout_timer(unsigned long data)
{
struct at91mci_host *host;
host = (struct at91mci_host *)data;
if (host->request) {
dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
if (host->cmd && host->cmd->data) {
host->cmd->data->error = -ETIMEDOUT;
} else {
if (host->cmd)
host->cmd->error = -ETIMEDOUT;
else
host->request->cmd->error = -ETIMEDOUT;
}
mmc_request_done(host->mmc, host->request);
}
}
/*
* Copy from sg to a dma block - used for transfers
*/
......@@ -557,9 +582,10 @@ static void at91_mci_process_next(struct at91mci_host *host)
else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
host->flags |= FL_SENT_STOP;
at91_mci_send_command(host, host->request->stop);
}
else
} else {
del_timer(&host->timer);
mmc_request_done(host->mmc, host->request);
}
}
/*
......@@ -618,6 +644,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->request = mrq;
host->flags = 0;
mod_timer(&host->timer, jiffies + HZ);
at91_mci_process_next(host);
}
......@@ -936,6 +964,8 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc_add_host(mmc);
setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
/*
* monitor card insertion/removal if we can
*/
......@@ -996,6 +1026,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
}
at91_mci_disable(host);
del_timer_sync(&host->timer);
mmc_remove_host(mmc);
free_irq(host->irq, host);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册