mtd: gpmi: add device tree support to gpmi-nand

This patch just adds the DT support to gpmi-nand.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NHuang Shijie <shijie8@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Documentation/devicetree/bindings/mtd/gpmi-nand.txt

+* Freescale General-Purpose Media Interface (GPMI)
+
+The GPMI nand controller provides an interface to control the
+NAND flash chips. We support only one NAND chip now.
+
+Required properties:
+  - compatible : should be "fsl,<chip>-gpmi-nand"
+  - reg : should contain registers location and length for gpmi and bch.
+  - reg-names: Should contain the reg names "gpmi-nand" and "bch"
+  - interrupts : The first is the DMA interrupt number for GPMI.
+                 The second is the BCH interrupt number.
+  - interrupt-names : The interrupt names "gpmi-dma", "bch";
+  - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+gpmi-nand@8000c000 {
+	compatible = "fsl,imx28-gpmi-nand";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x8000c000 2000>, <0x8000a000 2000>;
+	reg-names = "gpmi-nand", "bch";
+	interrupts = <88>, <41>;
+	interrupt-names = "gpmi-dma", "bch";
+	fsl,gpmi-dma-channel = <4>;
+
+	partition@0 {
+	...
+	};
+};

drivers/mtd/nand/gpmi-nand/gpmi-lib.c

@@ -256,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time,
 	return max(k, min);
 }
 
+#define DEF_MIN_PROP_DELAY	5
+#define DEF_MAX_PROP_DELAY	9
 /* Apply timing to current hardware conditions. */
 static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 					struct gpmi_nfc_hardware_timing *hw)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct timing_threshod *nfc = &timing_default_threshold;
 	struct nand_chip *nand = &this->nand;
 	struct nand_timing target = this->timing;
@@ -277,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 	int ideal_sample_delay_in_ns;
 	unsigned int sample_delay_factor;
 	int tEYE;
-	unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
-	unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+	unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+	unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
 
 	/*
 	 * If there are multiple chips, we need to relax the timings to allow

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -24,6 +24,8 @@
 #include <linux/module.h>
 #include <linux/mtd/gpmi-nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "gpmi-nand.h"
 
 /* add our owner bbt descriptor */
@@ -386,7 +388,7 @@ static void release_bch_irq(struct gpmi_nand_data *this)
 static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 {
 	struct gpmi_nand_data *this = param;
-	struct resource *r = this->private;
+	int dma_channel = (int)this->private;
 
 	if (!mxs_dma_is_apbh(chan))
 		return false;
@@ -398,7 +400,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 	 *	for mx28 :	MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
 	 *		(These eight channels share the same IRQ!)
 	 */
-	if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+	if (dma_channel == chan->chan_id) {
 		chan->private = &this->dma_data;
 		return true;
 	}
@@ -418,57 +420,45 @@ static void release_dma_channels(struct gpmi_nand_data *this)
 static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
-	struct gpmi_nand_platform_data *pdata = this->pdata;
-	struct resources *res = &this->resources;
-	struct resource *r, *r_dma;
-	unsigned int i;
+	struct resource *r_dma;
+	struct device_node *dn;
+	int dma_channel;
+	unsigned int ret;
+	struct dma_chan *dma_chan;
+	dma_cap_mask_t mask;
+
+	/* dma channel, we only use the first one. */
+	dn = pdev->dev.of_node;
+	ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
+	if (ret) {
+		pr_err("unable to get DMA channel from dt.\n");
+		goto acquire_err;
+	}
+	this->private = (void *)dma_channel;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME);
+	/* gpmi dma interrupt */
 	r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
 					GPMI_NAND_DMA_INTERRUPT_RES_NAME);
-	if (!r || !r_dma) {
+	if (!r_dma) {
 		pr_err("Can't get resource for DMA\n");
-		return -ENXIO;
+		goto acquire_err;
 	}
+	this->dma_data.chan_irq = r_dma->start;
 
-	/* used in gpmi_dma_filter() */
-	this->private = r;
-
-	for (i = r->start; i <= r->end; i++) {
-		struct dma_chan *dma_chan;
-		dma_cap_mask_t mask;
+	/* request dma channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		if (i - r->start >= pdata->max_chip_count)
-			break;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		/* get the DMA interrupt */
-		if (r_dma->start == r_dma->end) {
-			/* only register the first. */
-			if (i == r->start)
-				this->dma_data.chan_irq = r_dma->start;
-			else
-				this->dma_data.chan_irq = NO_IRQ;
-		} else
-			this->dma_data.chan_irq = r_dma->start + (i - r->start);
-
-		dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
-		if (!dma_chan)
-			goto acquire_err;
-
-		/* fill the first empty item */
-		this->dma_chans[i - r->start] = dma_chan;
+	dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+	if (!dma_chan) {
+		pr_err("dma_request_channel failed.\n");
+		goto acquire_err;
 	}
 
-	res->dma_low_channel = r->start;
-	res->dma_high_channel = i;
+	this->dma_chans[0] = dma_chan;
 	return 0;
 
 acquire_err:
-	pr_err("Can't acquire DMA channel %u\n", i);
 	release_dma_channels(this);
 	return -EINVAL;
 }
@@ -1465,9 +1455,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this)
 
 static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct mtd_info  *mtd = &this->mtd;
 	struct nand_chip *chip = &this->nand;
+	struct mtd_part_parser_data ppdata = {};
 	int ret;
 
 	/* init current chip */
@@ -1505,14 +1495,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan(mtd, pdata->max_chip_count);
+	ret = nand_scan(mtd, 1);
 	if (ret) {
 		pr_err("Chip scan failed\n");
 		goto err_out;
 	}
 
-	ret = mtd_device_parse_register(mtd, NULL, NULL,
-			pdata->partitions, pdata->partition_count);
+	ppdata.of_node = this->pdev->dev.of_node;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (ret)
 		goto err_out;
 	return 0;
@@ -1522,12 +1512,37 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	return ret;
 }
 
+static const struct platform_device_id gpmi_ids[] = {
+	{ .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
+	{ .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
+	{},
+};
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+	{
+		.compatible = "fsl,imx23-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX23]
+	}, {
+		.compatible = "fsl,imx28-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX28]
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
 static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 {
-	struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct gpmi_nand_data *this;
+	const struct of_device_id *of_id;
 	int ret;
 
+	of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+	if (of_id) {
+		pdev->id_entry = of_id->data;
+	} else {
+		pr_err("Failed to find the right device id.\n");
+		return -ENOMEM;
+	}
+
 	this = kzalloc(sizeof(*this), GFP_KERNEL);
 	if (!this) {
 		pr_err("Failed to allocate per-device memory\n");
@@ -1537,13 +1552,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, this);
 	this->pdev  = pdev;
 	this->dev   = &pdev->dev;
-	this->pdata = pdata;
-
-	if (pdata->platform_init) {
-		ret = pdata->platform_init();
-		if (ret)
-			goto platform_init_error;
-	}
 
 	ret = acquire_resources(this);
 	if (ret)
@@ -1561,7 +1569,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 
 exit_nfc_init:
 	release_resources(this);
-platform_init_error:
 exit_acquire_resources:
 	platform_set_drvdata(pdev, NULL);
 	kfree(this);
@@ -1579,19 +1586,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id gpmi_ids[] = {
-	{
-		.name = "imx23-gpmi-nand",
-		.driver_data = IS_MX23,
-	}, {
-		.name = "imx28-gpmi-nand",
-		.driver_data = IS_MX28,
-	}, {},
-};
-
 static struct platform_driver gpmi_nand_driver = {
 	.driver = {
 		.name = "gpmi-nand",
+		.of_match_table = gpmi_nand_id_table,
 	},
 	.probe   = gpmi_nand_probe,
 	.remove  = __exit_p(gpmi_nand_remove),

drivers/mtd/nand/gpmi-nand/gpmi-nand.h

@@ -266,8 +266,8 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
 #define STATUS_UNCORRECTABLE	0xfe
 
 /* Use the platform_id to distinguish different Archs. */
-#define IS_MX23			0x1
-#define IS_MX28			0x2
+#define IS_MX23			0x0
+#define IS_MX28			0x1
 #define GPMI_IS_MX23(x)		((x)->pdev->id_entry->driver_data == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->pdev->id_entry->driver_data == IS_MX28)
 #endif

include/linux/mtd/gpmi-nand.h

@@ -23,12 +23,12 @@
 #define GPMI_NAND_RES_SIZE	6
 
 /* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
 #define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
 #define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
 
 /**
  * struct gpmi_nand_platform_data - GPMI NAND driver platform data.