提交 e0a37f85 编写于 作者: R Roy Spliet 提交者: Ben Skeggs

drm/nouveau/fb/ramgt215: Transform GPIO ramfuc method from FBVREF-specific to generic

In preparation of changing FBVDDQ, as observed on at least one GDDR3 card.
While at it, adhere to func.log[1] properly for consistency.
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
上级 b4f2bf33
......@@ -34,9 +34,6 @@
#include <subdev/clk/gt215.h>
#include <subdev/gpio.h>
/* XXX: Remove when memx gains GPIO support */
extern int nv50_gpio_location(int line, u32 *reg, u32 *shift);
struct gt215_ramfuc {
struct ramfuc base;
struct ramfuc_reg r_0x001610;
......@@ -75,7 +72,7 @@ struct gt215_ramfuc {
struct ramfuc_reg r_0x111400;
struct ramfuc_reg r_0x611200;
struct ramfuc_reg r_mr[4];
struct ramfuc_reg r_gpioFBVREF;
struct ramfuc_reg r_gpio[4];
};
struct gt215_ltrain {
......@@ -466,24 +463,27 @@ gt215_ram_lock_pll(struct gt215_ramfuc *fuc, struct gt215_clk_info *mclk)
}
static void
gt215_ram_fbvref(struct gt215_ramfuc *fuc, u32 val)
gt215_ram_gpio(struct gt215_ramfuc *fuc, u8 tag, u32 val)
{
struct nvkm_gpio *gpio = fuc->base.fb->subdev.device->gpio;
struct dcb_gpio_func func;
u32 reg, sh, gpio_val;
int ret;
if (nvkm_gpio_get(gpio, 0, 0x2e, DCB_GPIO_UNUSED) != val) {
ret = nvkm_gpio_find(gpio, 0, 0x2e, DCB_GPIO_UNUSED, &func);
if (nvkm_gpio_get(gpio, 0, tag, DCB_GPIO_UNUSED) != val) {
ret = nvkm_gpio_find(gpio, 0, tag, DCB_GPIO_UNUSED, &func);
if (ret)
return;
nv50_gpio_location(func.line, &reg, &sh);
gpio_val = ram_rd32(fuc, gpioFBVREF);
reg = func.line >> 3;
sh = (func.line & 0x7) << 2;
gpio_val = ram_rd32(fuc, gpio[reg]);
if (gpio_val & (8 << sh))
val = !val;
if (!(func.log[1] & 1))
val = !val;
ram_mask(fuc, gpioFBVREF, (0x3 << sh), ((val | 0x2) << sh));
ram_mask(fuc, gpio[reg], (0x3 << sh), ((val | 0x2) << sh));
ram_nsec(fuc, 20000);
}
}
......@@ -642,8 +642,8 @@ gt215_ram_calc(struct nvkm_ram *base, u32 freq)
break;
}
if (fuc->r_gpioFBVREF.addr && next->bios.timing_10_ODT)
gt215_ram_fbvref(fuc, 0);
if (next->bios.timing_10_ODT)
gt215_ram_gpio(fuc, 0x2e, 1);
/* Brace RAM for impact */
ram_wr32(fuc, 0x1002d4, 0x00000001);
......@@ -809,8 +809,8 @@ gt215_ram_calc(struct nvkm_ram *base, u32 freq)
ram_mask(fuc, 0x100718, 0xffffffff, unk718);
ram_mask(fuc, 0x111100, 0xffffffff, r111100);
if (fuc->r_gpioFBVREF.addr && !next->bios.timing_10_ODT)
gt215_ram_fbvref(fuc, 1);
if (!next->bios.timing_10_ODT)
gt215_ram_gpio(fuc, 0x2e, 0);
/* Reset DLL */
if (!next->bios.ramcfg_DLLoff)
......@@ -919,10 +919,7 @@ gt215_ram_func = {
int
gt215_ram_new(struct nvkm_fb *fb, struct nvkm_ram **pram)
{
struct nvkm_gpio *gpio = fb->subdev.device->gpio;
struct dcb_gpio_func func;
struct gt215_ram *ram;
u32 reg, shift;
int ret, i;
if (!(ram = kzalloc(sizeof(*ram), GFP_KERNEL)))
......@@ -981,12 +978,10 @@ gt215_ram_new(struct nvkm_fb *fb, struct nvkm_ram **pram)
ram->fuc.r_mr[2] = ramfuc_reg(0x1002e0);
ram->fuc.r_mr[3] = ramfuc_reg(0x1002e4);
}
ret = nvkm_gpio_find(gpio, 0, 0x2e, DCB_GPIO_UNUSED, &func);
if (ret == 0) {
nv50_gpio_location(func.line, &reg, &shift);
ram->fuc.r_gpioFBVREF = ramfuc_reg(reg);
}
ram->fuc.r_gpio[0] = ramfuc_reg(0x00e104);
ram->fuc.r_gpio[1] = ramfuc_reg(0x00e108);
ram->fuc.r_gpio[2] = ramfuc_reg(0x00e120);
ram->fuc.r_gpio[3] = ramfuc_reg(0x00e124);
return 0;
}
......@@ -54,7 +54,7 @@ nv50_gpio_reset(struct nvkm_gpio *gpio, u8 match)
}
}
int
static int
nv50_gpio_location(int line, u32 *reg, u32 *shift)
{
const u32 nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册