提交 e06cea4c 编写于 作者: H Hartmut Hackmann 提交者: Mauro Carvalho Chehab

V4L/DVB (5445): Added / corrected support for some ASUS hybrid boards

There are 2 new entries for p7131 boards and one correction for a board
with LNA.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 cf83ac43
......@@ -76,7 +76,7 @@
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862,1043:4876]
78 -> ASUSTeK P7131 Dual [1043:4862,1043:4857]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]
......@@ -109,3 +109,5 @@
108 -> Terratec Cinergy HT PCI [153b:1175]
109 -> Philips Tiger - S Reference design
110 -> Avermedia M102 [1461:f31e]
111 -> ASUS P7131 4871 [1043:4871]
112 -> ASUSTeK P7131 Dual LNA [1043:4876]
......@@ -3351,6 +3351,62 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE2,
}},
},
[SAA7134_BOARD_ASUS_P7131_4871] = {
.name = "ASUS P7131 4871",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 2,
.mpeg = SAA7134_MPEG_DVB,
.gpiomask = 0x0200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x0200000,
}},
},
[SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA] = {
.name = "ASUSTeK P7131 Dual LNA",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 2,
.gpiomask = 1 << 21,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x0000000,
},{
.name = name_comp1,
.vmux = 3,
.amux = LINE2,
.gpio = 0x0200000,
},{
.name = name_comp2,
.vmux = 0,
.amux = LINE2,
.gpio = 0x0200000,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
.gpio = 0x0200000,
}},
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0200000,
},
},
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
......@@ -3976,7 +4032,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1043,
.subdevice = 0x4876,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
......@@ -4031,6 +4087,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x4E42, /* MSI */
.subdevice = 0x0306, /* TV@nywhere DUO */
.driver_data = SAA7134_BOARD_FLYDVBTDUO,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1043,
.subdevice = 0x4871,
.driver_data = SAA7134_BOARD_ASUS_P7131_4871,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1043,
.subdevice = 0x4857,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -4136,6 +4204,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA:
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_PROTEUS_2309:
case SAA7134_BOARD_AVERMEDIA_A16AR:
......@@ -4359,6 +4428,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
......
......@@ -858,6 +858,35 @@ static struct tda1004x_config md8800_dvbt_config = {
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config asus_p7131_4871_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config asus_p7131_dual_lna_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
......@@ -1121,6 +1150,12 @@ static int dvb_init(struct saa7134_dev *dev)
case SAA7134_BOARD_PHILIPS_TIGER_S:
configure_tda827x_fe(dev, &philips_tiger_s_config);
break;
case SAA7134_BOARD_ASUS_P7131_4871:
configure_tda827x_fe(dev, &asus_p7131_4871_config);
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA:
configure_tda827x_fe(dev, &asus_p7131_dual_lna_config);
break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
......
......@@ -233,6 +233,8 @@ struct saa7134_format {
#define SAA7134_BOARD_CINERGY_HT_PCI 108
#define SAA7134_BOARD_PHILIPS_TIGER_S 109
#define SAA7134_BOARD_AVERMEDIA_M102 110
#define SAA7134_BOARD_ASUS_P7131_4871 111
#define SAA7134_BOARD_ASUSTeK_P7131_DUAL_LNA 112
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册