usb: ehci-orion: avoid double PHY initialization

No need to initialize the PHY from the driver's probe. It is done by
the core automatically and doing it twice would increment the
phy->powercount counter to 2 instead of 1. During later suspend
operation, the counter will be decremented to one, no phy->power_off()
will occur and worse than that, the following phy->power_on() at
resume time will also be skipped, failing the whole S2RAM operation.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/ehci-orion.c

@@ -257,15 +257,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->phy)) {
 		err = PTR_ERR(priv->phy);
 		if (err != -ENOSYS)
-			goto err_phy_get;
-	} else {
-		err = phy_init(priv->phy);
-		if (err)
-			goto err_phy_init;
-
-		err = phy_power_on(priv->phy);
-		if (err)
-			goto err_phy_power_on;
+			goto err_dis_clk;
 	}
 
 	/*
@@ -297,19 +289,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_add_hcd;
+		goto err_dis_clk;
 
 	device_wakeup_enable(hcd->self.controller);
 	return 0;
 
-err_add_hcd:
-	if (!IS_ERR(priv->phy))
-		phy_power_off(priv->phy);
-err_phy_power_on:
-	if (!IS_ERR(priv->phy))
-		phy_exit(priv->phy);
-err_phy_init:
-err_phy_get:
+err_dis_clk:
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
 	usb_put_hcd(hcd);
@@ -327,11 +312,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 
-	if (!IS_ERR(priv->phy)) {
-		phy_power_off(priv->phy);
-		phy_exit(priv->phy);
-	}
-
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);