Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 e019630e 编写于 作者: A Adrian Bunk 提交者： Linus Torvalds
浏览文件
操作

[PATCH] remove broken video drivers 

Remove some video drivers that:

- had already been marked as BROKEN in 2.6.0 three years ago and
- are still marked as BROKEN.

These are the following drivers:
- FB_CYBER
- FB_VIRGE
- FB_RETINAZ3
- FB_SUN3

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive any of these drivers, the code is
still present in the older kernel releases.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-By: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 a268422d
展开全部 隐藏空白更改
内联 并排
Showing with 3 addition and 8147 deletion
drivers/video/Kconfig
浏览文件 @ e019630e
......@@ -354,42 +354,6 @@ config FB_AMIGA_AGA
and CD32. If you intend to run Linux on any of these systems, say Y;
otherwise say N.
config FB_CYBER
tristate "Amiga CyberVision 64 support"
depends on FB && ZORRO && BROKEN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
you have any questions, be sure to ask!). Say N unless you have a
Cybervision 64 or plan to get one before you next recompile the
kernel. Please note that this driver DOES NOT support the
Cybervision 64/3D card, as they use incompatible video chips.
config FB_VIRGE
bool "Amiga CyberVision 64/3D support "
depends on (FB = y) && ZORRO && BROKEN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
you have any questions, be sure to ask!). Say N unless you have a
Cybervision 64/3D or plan to get one before you next recompile the
kernel. Please note that this driver DOES NOT support the older
Cybervision 64 card, as they use incompatible video chips.
config FB_RETINAZ3
tristate "Amiga Retina Z3 support"
depends on (FB = y) && ZORRO && BROKEN
help
This enables support for the Retina Z3 graphics card. Say N unless
you have a Retina Z3 or plan to get one before you next recompile
the kernel.
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on (FB = y) && ZORRO
......@@ -625,10 +589,6 @@ config FB_GBE_MEM
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
config FB_SUN3
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on (FB = y) && SPARC
......@@ -637,7 +597,7 @@ config FB_SBUS
config FB_BW2
bool "BWtwo support"
depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
......@@ -646,7 +606,7 @@ config FB_BW2
config FB_CG3
bool "CGthree support"
depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
......@@ -655,7 +615,7 @@ config FB_CG3
config FB_CG6
bool "CGsix (GX,TurboGX) support"
depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
......
drivers/video/Makefile
浏览文件 @ e019630e
......@@ -22,11 +22,9 @@ obj-$(CONFIG_FB_MACMODES) += macmodes.o
obj-$(CONFIG_FB_DDC) += fb_ddc.o
# Hardware specific drivers go first
obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER) += cyberfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
......@@ -44,7 +42,6 @@ obj-$(CONFIG_FB_GEODE) += geode/
obj-$(CONFIG_FB_MBX) += mbx/
obj-$(CONFIG_FB_I810) += vgastate.o
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
obj-$(CONFIG_FB_CONTROL) += controlfb.o
obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
......@@ -77,7 +74,6 @@ obj-$(CONFIG_FB_TGA) += tgafb.o
obj-$(CONFIG_FB_HP300) += hpfb.o
obj-$(CONFIG_FB_G364) += g364fb.o
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_SUN3) += sun3fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
......
drivers/video/cyberfb.c 已删除 100644 → 0
浏览文件 @ a268422d
此差异已折叠。
drivers/video/cyberfb.h 已删除 100644 → 0
浏览文件 @ a268422d
/*
* linux/arch/m68k/console/cvision.h -- CyberVision64 definitions for the
* text console driver.
*
* Copyright (c) 1998 Alan Bair
*
* This file is based on the initial port to Linux of grf_cvreg.h:
*
* Copyright (c) 1997 Antonio Santos
*
* The original work is from the NetBSD CyberVision 64 framebuffer driver
* and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
* Permission to use the source of this driver was obtained from the
* author Michael Teske by Alan Bair.
*
* Copyright (c) 1995 Michael Teske
*
* History:
*
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* s3 commands */
#define S3_BITBLT 0xc011
#define S3_TWOPOINTLINE 0x2811
#define S3_FILLEDRECT 0x40b1
#define S3_FIFO_EMPTY 0x0400
#define S3_HDW_BUSY 0x0200
/* Enhanced register mapping (MMIO mode) */
#define S3_READ_SEL 0xbee8 /* offset f */
#define S3_MULT_MISC 0xbee8 /* offset e */
#define S3_ERR_TERM 0x92e8
#define S3_FRGD_COLOR 0xa6e8
#define S3_BKGD_COLOR 0xa2e8
#define S3_PIXEL_CNTL 0xbee8 /* offset a */
#define S3_FRGD_MIX 0xbae8
#define S3_BKGD_MIX 0xb6e8
#define S3_CUR_Y 0x82e8
#define S3_CUR_X 0x86e8
#define S3_DESTY_AXSTP 0x8ae8
#define S3_DESTX_DIASTP 0x8ee8
#define S3_MIN_AXIS_PCNT 0xbee8 /* offset 0 */
#define S3_MAJ_AXIS_PCNT 0x96e8
#define S3_CMD 0x9ae8
#define S3_GP_STAT 0x9ae8
#define S3_ADVFUNC_CNTL 0x4ae8
#define S3_WRT_MASK 0xaae8
#define S3_RD_MASK 0xaee8
/* Enhanced register mapping (Packed MMIO mode, write only) */
#define S3_ALT_CURXY 0x8100
#define S3_ALT_CURXY2 0x8104
#define S3_ALT_STEP 0x8108
#define S3_ALT_STEP2 0x810c
#define S3_ALT_ERR 0x8110
#define S3_ALT_CMD 0x8118
#define S3_ALT_MIX 0x8134
#define S3_ALT_PCNT 0x8148
#define S3_ALT_PAT 0x8168
/* Drawing modes */
#define S3_NOTCUR 0x0000
#define S3_LOGICALZERO 0x0001
#define S3_LOGICALONE 0x0002
#define S3_LEAVEASIS 0x0003
#define S3_NOTNEW 0x0004
#define S3_CURXORNEW 0x0005
#define S3_NOT_CURXORNEW 0x0006
#define S3_NEW 0x0007
#define S3_NOTCURORNOTNEW 0x0008
#define S3_CURORNOTNEW 0x0009
#define S3_NOTCURORNEW 0x000a
#define S3_CURORNEW 0x000b
#define S3_CURANDNEW 0x000c
#define S3_NOTCURANDNEW 0x000d
#define S3_CURANDNOTNEW 0x000e
#define S3_NOTCURANDNOTNEW 0x000f
#define S3_CRTC_ADR 0x03d4
#define S3_CRTC_DATA 0x03d5
#define S3_REG_LOCK2 0x39
#define S3_HGC_MODE 0x45
#define S3_HWGC_ORGX_H 0x46
#define S3_HWGC_ORGX_L 0x47
#define S3_HWGC_ORGY_H 0x48
#define S3_HWGC_ORGY_L 0x49
#define S3_HWGC_DX 0x4e
#define S3_HWGC_DY 0x4f
#define S3_LAW_CTL 0x58
/**************************************************/
/* support for a BitBlt operation. The op-codes are identical
to X11 GCs */
#define GRFBBOPclear 0x0 /* 0 */
#define GRFBBOPand 0x1 /* src AND dst */
#define GRFBBOPandReverse 0x2 /* src AND NOT dst */
#define GRFBBOPcopy 0x3 /* src */
#define GRFBBOPandInverted 0x4 /* NOT src AND dst */
#define GRFBBOPnoop 0x5 /* dst */
#define GRFBBOPxor 0x6 /* src XOR dst */
#define GRFBBOPor 0x7 /* src OR dst */
#define GRFBBOPnor 0x8 /* NOT src AND NOT dst */
#define GRFBBOPequiv 0x9 /* NOT src XOR dst */
#define GRFBBOPinvert 0xa /* NOT dst */
#define GRFBBOPorReverse 0xb /* src OR NOT dst */
#define GRFBBOPcopyInverted 0xc /* NOT src */
#define GRFBBOPorInverted 0xd /* NOT src OR dst */
#define GRFBBOPnand 0xe /* NOT src OR NOT dst */
#define GRFBBOPset 0xf /* 1 */
/* Write 16 Bit VGA register */
#define vgaw16(ba, reg, val) \
*((unsigned short *) (((volatile unsigned char *)ba)+reg)) = val
/*
* Defines for the used register addresses (mw)
*
* NOTE: There are some registers that have different addresses when
* in mono or color mode. We only support color mode, and thus
* some addresses won't work in mono-mode!
*
* General and VGA-registers taken from retina driver. Fixed a few
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
*
*/
/* General Registers: */
#define GREG_MISC_OUTPUT_R 0x03CC
#define GREG_MISC_OUTPUT_W 0x03C2
#define GREG_FEATURE_CONTROL_R 0x03CA
#define GREG_FEATURE_CONTROL_W 0x03DA
#define GREG_INPUT_STATUS0_R 0x03C2
#define GREG_INPUT_STATUS1_R 0x03DA
/* Setup Registers: */
#define SREG_OPTION_SELECT 0x0102
#define SREG_VIDEO_SUBS_ENABLE 0x46E8
/* Attribute Controller: */
#define ACT_ADDRESS 0x03C0
#define ACT_ADDRESS_R 0x03C1
#define ACT_ADDRESS_W 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_ID_PALETTE0 0x00
#define ACT_ID_PALETTE1 0x01
#define ACT_ID_PALETTE2 0x02
#define ACT_ID_PALETTE3 0x03
#define ACT_ID_PALETTE4 0x04
#define ACT_ID_PALETTE5 0x05
#define ACT_ID_PALETTE6 0x06
#define ACT_ID_PALETTE7 0x07
#define ACT_ID_PALETTE8 0x08
#define ACT_ID_PALETTE9 0x09
#define ACT_ID_PALETTE10 0x0A
#define ACT_ID_PALETTE11 0x0B
#define ACT_ID_PALETTE12 0x0C
#define ACT_ID_PALETTE13 0x0D
#define ACT_ID_PALETTE14 0x0E
#define ACT_ID_PALETTE15 0x0F
#define ACT_ID_ATTR_MODE_CNTL 0x10
#define ACT_ID_OVERSCAN_COLOR 0x11
#define ACT_ID_COLOR_PLANE_ENA 0x12
#define ACT_ID_HOR_PEL_PANNING 0x13
#define ACT_ID_COLOR_SELECT 0x14
/* Graphics Controller: */
#define GCT_ADDRESS 0x03CE
#define GCT_ADDRESS_R 0x03CF
#define GCT_ADDRESS_W 0x03CF
#define GCT_ID_SET_RESET 0x00
#define GCT_ID_ENABLE_SET_RESET 0x01
#define GCT_ID_COLOR_COMPARE 0x02
#define GCT_ID_DATA_ROTATE 0x03
#define GCT_ID_READ_MAP_SELECT 0x04
#define GCT_ID_GRAPHICS_MODE 0x05
#define GCT_ID_MISC 0x06
#define GCT_ID_COLOR_XCARE 0x07
#define GCT_ID_BITMASK 0x08
/* Sequencer: */
#define SEQ_ADDRESS 0x03C4
#define SEQ_ADDRESS_R 0x03C5
#define SEQ_ADDRESS_W 0x03C5
#define SEQ_ID_RESET 0x00
#define SEQ_ID_CLOCKING_MODE 0x01
#define SEQ_ID_MAP_MASK 0x02
#define SEQ_ID_CHAR_MAP_SELECT 0x03
#define SEQ_ID_MEMORY_MODE 0x04
#define SEQ_ID_UNKNOWN1 0x05
#define SEQ_ID_UNKNOWN2 0x06
#define SEQ_ID_UNKNOWN3 0x07
/* S3 extensions */
#define SEQ_ID_UNLOCK_EXT 0x08
#define SEQ_ID_EXT_SEQ_REG9 0x09
#define SEQ_ID_BUS_REQ_CNTL 0x0A
#define SEQ_ID_EXT_MISC_SEQ 0x0B
#define SEQ_ID_UNKNOWN4 0x0C
#define SEQ_ID_EXT_SEQ 0x0D
#define SEQ_ID_UNKNOWN5 0x0E
#define SEQ_ID_UNKNOWN6 0x0F
#define SEQ_ID_MCLK_LO 0x10
#define SEQ_ID_MCLK_HI 0x11
#define SEQ_ID_DCLK_LO 0x12
#define SEQ_ID_DCLK_HI 0x13
#define SEQ_ID_CLKSYN_CNTL_1 0x14
#define SEQ_ID_CLKSYN_CNTL_2 0x15
#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
#define SEQ_ID_RAMDAC_CNTL 0x18
#define SEQ_ID_MORE_MAGIC 0x1A
/* CRT Controller: */
#define CRT_ADDRESS 0x03D4
#define CRT_ADDRESS_R 0x03D5
#define CRT_ADDRESS_W 0x03D5
#define CRT_ID_HOR_TOTAL 0x00
#define CRT_ID_HOR_DISP_ENA_END 0x01
#define CRT_ID_START_HOR_BLANK 0x02
#define CRT_ID_END_HOR_BLANK 0x03
#define CRT_ID_START_HOR_RETR 0x04
#define CRT_ID_END_HOR_RETR 0x05
#define CRT_ID_VER_TOTAL 0x06
#define CRT_ID_OVERFLOW 0x07
#define CRT_ID_PRESET_ROW_SCAN 0x08
#define CRT_ID_MAX_SCAN_LINE 0x09
#define CRT_ID_CURSOR_START 0x0A
#define CRT_ID_CURSOR_END 0x0B
#define CRT_ID_START_ADDR_HIGH 0x0C
#define CRT_ID_START_ADDR_LOW 0x0D
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
#define CRT_ID_CURSOR_LOC_LOW 0x0F
#define CRT_ID_START_VER_RETR 0x10
#define CRT_ID_END_VER_RETR 0x11
#define CRT_ID_VER_DISP_ENA_END 0x12
#define CRT_ID_SCREEN_OFFSET 0x13
#define CRT_ID_UNDERLINE_LOC 0x14
#define CRT_ID_START_VER_BLANK 0x15
#define CRT_ID_END_VER_BLANK 0x16
#define CRT_ID_MODE_CONTROL 0x17
#define CRT_ID_LINE_COMPARE 0x18
#define CRT_ID_GD_LATCH_RBACK 0x22
#define CRT_ID_ACT_TOGGLE_RBACK 0x24
#define CRT_ID_ACT_INDEX_RBACK 0x26
/* S3 extensions: S3 VGA Registers */
#define CRT_ID_DEVICE_HIGH 0x2D
#define CRT_ID_DEVICE_LOW 0x2E
#define CRT_ID_REVISION 0x2F
#define CRT_ID_CHIP_ID_REV 0x30
#define CRT_ID_MEMORY_CONF 0x31
#define CRT_ID_BACKWAD_COMP_1 0x32
#define CRT_ID_BACKWAD_COMP_2 0x33
#define CRT_ID_BACKWAD_COMP_3 0x34
#define CRT_ID_REGISTER_LOCK 0x35
#define CRT_ID_CONFIG_1 0x36
#define CRT_ID_CONFIG_2 0x37
#define CRT_ID_REGISTER_LOCK_1 0x38
#define CRT_ID_REGISTER_LOCK_2 0x39
#define CRT_ID_MISC_1 0x3A
#define CRT_ID_DISPLAY_FIFO 0x3B
#define CRT_ID_LACE_RETR_START 0x3C
/* S3 extensions: System Control Registers */
#define CRT_ID_SYSTEM_CONFIG 0x40
#define CRT_ID_BIOS_FLAG 0x41
#define CRT_ID_LACE_CONTROL 0x42
#define CRT_ID_EXT_MODE 0x43
#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
#define CRT_ID_HWGC_FG_STACK 0x4A
#define CRT_ID_HWGC_BG_STACK 0x4B
#define CRT_ID_HWGC_START_AD_HI 0x4C
#define CRT_ID_HWGC_START_AD_LO 0x4D
#define CRT_ID_HWGC_DSTART_X 0x4E
#define CRT_ID_HWGC_DSTART_Y 0x4F
/* S3 extensions: System Extension Registers */
#define CRT_ID_EXT_SYS_CNTL_1 0x50
#define CRT_ID_EXT_SYS_CNTL_2 0x51
#define CRT_ID_EXT_BIOS_FLAG_1 0x52
#define CRT_ID_EXT_MEM_CNTL_1 0x53
#define CRT_ID_EXT_MEM_CNTL_2 0x54
#define CRT_ID_EXT_DAC_CNTL 0x55
#define CRT_ID_EX_SYNC_1 0x56
#define CRT_ID_EX_SYNC_2 0x57
#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
#define CRT_ID_LAW_POS_HI 0x59
#define CRT_ID_LAW_POS_LO 0x5A
#define CRT_ID_GOUT_PORT 0x5C
#define CRT_ID_EXT_HOR_OVF 0x5D
#define CRT_ID_EXT_VER_OVF 0x5E
#define CRT_ID_EXT_MEM_CNTL_3 0x60
#define CRT_ID_EX_SYNC_3 0x63
#define CRT_ID_EXT_MISC_CNTL 0x65
#define CRT_ID_EXT_MISC_CNTL_1 0x66
#define CRT_ID_EXT_MISC_CNTL_2 0x67
#define CRT_ID_CONFIG_3 0x68
#define CRT_ID_EXT_SYS_CNTL_3 0x69
#define CRT_ID_EXT_SYS_CNTL_4 0x6A
#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
/* Enhanced Commands Registers: */
#define ECR_SUBSYSTEM_STAT 0x42E8
#define ECR_SUBSYSTEM_CNTL 0x42E8
#define ECR_ADV_FUNC_CNTL 0x4AE8
#define ECR_CURRENT_Y_POS 0x82E8
#define ECR_CURRENT_Y_POS2 0x82EA /* Trio64 only */
#define ECR_CURRENT_X_POS 0x86E8
#define ECR_CURRENT_X_POS2 0x86EA /* Trio64 only */
#define ECR_DEST_Y__AX_STEP 0x8AE8
#define ECR_DEST_Y2__AX_STEP2 0x8AEA /* Trio64 only */
#define ECR_DEST_X__DIA_STEP 0x8EE8
#define ECR_DEST_X2__DIA_STEP2 0x8EEA /* Trio64 only */
#define ECR_ERR_TERM 0x92E8
#define ECR_ERR_TERM2 0x92EA /* Trio64 only */
#define ECR_MAJ_AXIS_PIX_CNT 0x96E8
#define ECR_MAJ_AXIS_PIX_CNT2 0x96EA /* Trio64 only */
#define ECR_GP_STAT 0x9AE8 /* GP = Graphics Processor */
#define ECR_DRAW_CMD 0x9AE8
#define ECR_DRAW_CMD2 0x9AEA /* Trio64 only */
#define ECR_SHORT_STROKE 0x9EE8
#define ECR_BKGD_COLOR 0xA2E8 /* BKGD = Background */
#define ECR_FRGD_COLOR 0xA6E8 /* FRGD = Foreground */
#define ECR_BITPLANE_WRITE_MASK 0xAAE8
#define ECR_BITPLANE_READ_MASK 0xAEE8
#define ECR_COLOR_COMPARE 0xB2E8
#define ECR_BKGD_MIX 0xB6E8
#define ECR_FRGD_MIX 0xBAE8
#define ECR_READ_REG_DATA 0xBEE8
#define ECR_ID_MIN_AXIS_PIX_CNT 0x00
#define ECR_ID_SCISSORS_TOP 0x01
#define ECR_ID_SCISSORS_LEFT 0x02
#define ECR_ID_SCISSORS_BUTTOM 0x03
#define ECR_ID_SCISSORS_RIGHT 0x04
#define ECR_ID_PIX_CNTL 0x0A
#define ECR_ID_MULT_CNTL_MISC_2 0x0D
#define ECR_ID_MULT_CNTL_MISC 0x0E
#define ECR_ID_READ_SEL 0x0F
#define ECR_PIX_TRANS 0xE2E8
#define ECR_PIX_TRANS_EXT 0xE2EA
#define ECR_PATTERN_Y 0xEAE8 /* Trio64 only */
#define ECR_PATTERN_X 0xEAEA /* Trio64 only */
/* Pass-through */
#define PASS_ADDRESS 0x40001
#define PASS_ADDRESS_W 0x40001
/* Video DAC */
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
#define WGfx(ba, idx, val) \
do { wb_64(ba, GCT_ADDRESS, idx); wb_64(ba, GCT_ADDRESS_W , val); } while (0)
#define WSeq(ba, idx, val) \
do { wb_64(ba, SEQ_ADDRESS, idx); wb_64(ba, SEQ_ADDRESS_W , val); } while (0)
#define WCrt(ba, idx, val) \
do { wb_64(ba, CRT_ADDRESS, idx); wb_64(ba, CRT_ADDRESS_W , val); } while (0)
#define WAttr(ba, idx, val) \
do { \
unsigned char tmp;\
tmp = rb_64(ba, ACT_ADDRESS_RESET);\
wb_64(ba, ACT_ADDRESS_W, idx);\
wb_64(ba, ACT_ADDRESS_W, val);\
} while (0)
#define SetTextPlane(ba, m) \
do { \
WGfx(ba, GCT_ID_READ_MAP_SELECT, m & 3 );\
WSeq(ba, SEQ_ID_MAP_MASK, (1 << (m & 3)));\
} while (0)
/* --------------------------------- */
/* prototypes */
/* --------------------------------- */
inline unsigned char RAttr(volatile unsigned char * board, short idx);
inline unsigned char RSeq(volatile unsigned char * board, short idx);
inline unsigned char RCrt(volatile unsigned char * board, short idx);
inline unsigned char RGfx(volatile unsigned char * board, short idx);
inline void cv64_write_port(unsigned short bits,
volatile unsigned char *board);
inline void cvscreen(int toggle, volatile unsigned char *board);
inline void gfx_on_off(int toggle, volatile unsigned char *board);
#if 0
unsigned short cv64_compute_clock(unsigned long freq);
int cv_has_4mb(volatile unsigned char * fb);
void cv64_board_init(void);
void cv64_load_video_mode(struct fb_var_screeninfo *video_mode);
#endif
void cvision_bitblt(u_short sx, u_short sy, u_short dx, u_short dy, u_short w,
u_short h);
void cvision_clear(u_short dx, u_short dy, u_short w, u_short h, u_short bg);
drivers/video/retz3fb.c 已删除 100644 → 0
浏览文件 @ a268422d
此差异已折叠。
drivers/video/retz3fb.h 已删除 100644 → 0
浏览文件 @ a268422d
/*
* linux/drivers/video/retz3fb.h -- Defines and macros for the RetinaZ3 frame
* buffer device
*
* Copyright (C) 1997 Jes Sorensen
*
* History:
* - 22 Jan 97: Initial work
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Macros to read and write to registers.
*/
#define reg_w(regs, reg,dat) (*(regs + reg) = dat)
#define reg_r(regs, reg) (*(regs + reg))
/*
* Macro to access the sequencer.
*/
#define seq_w(regs, sreg, sdat) \
do{ reg_w(regs, SEQ_IDX, sreg); reg_w(regs, SEQ_DATA, sdat); } while(0)
/*
* Macro to access the CRT controller.
*/
#define crt_w(regs, creg, cdat) \
do{ reg_w(regs, CRT_IDX, creg); reg_w(regs, CRT_DATA, cdat); } while(0)
/*
* Macro to access the graphics controller.
*/
#define gfx_w(regs, greg, gdat) \
do{ reg_w(regs, GFX_IDX, greg); reg_w(regs, GFX_DATA, gdat); } while(0)
/*
* Macro to access the attribute controller.
*/
#define attr_w(regs, areg, adat) \
do{ reg_w(regs, ACT_IDX, areg); reg_w(regs, ACT_DATA, adat); } while(0)
/*
* Macro to access the pll.
*/
#define pll_w(regs, preg, pdat) \
do{ reg_w(regs, PLL_IDX, preg); \
reg_w(regs, PLL_DATA, (pdat & 0xff)); \
reg_w(regs, PLL_DATA, (pdat >> 8));\
} while(0)
/*
* Offsets
*/
#define VIDEO_MEM_OFFSET 0x00c00000
#define ACM_OFFSET 0x00b00000
/*
* Accelerator Control Menu
*/
#define ACM_PRIMARY_OFFSET 0x00
#define ACM_SECONDARY_OFFSET 0x04
#define ACM_MODE_CONTROL 0x08
#define ACM_CURSOR_POSITION 0x0c
#define ACM_START_STATUS 0x30
#define ACM_CONTROL 0x34
#define ACM_RASTEROP_ROTATION 0x38
#define ACM_BITMAP_DIMENSION 0x3c
#define ACM_DESTINATION 0x40
#define ACM_SOURCE 0x44
#define ACM_PATTERN 0x48
#define ACM_FOREGROUND 0x4c
#define ACM_BACKGROUND 0x50
/*
* Video DAC addresses
*/
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
/*
* Sequencer
*/
#define SEQ_IDX 0x03c4 /* Sequencer Index */
#define SEQ_DATA 0x03c5
#define SEQ_RESET 0x00
#define SEQ_CLOCKING_MODE 0x01
#define SEQ_MAP_MASK 0x02
#define SEQ_CHAR_MAP_SELECT 0x03
#define SEQ_MEMORY_MODE 0x04
#define SEQ_EXTENDED_ENABLE 0x05 /* NCR extensions */
#define SEQ_UNKNOWN1 0x06
#define SEQ_UNKNOWN2 0x07
#define SEQ_CHIP_ID 0x08
#define SEQ_UNKNOWN3 0x09
#define SEQ_CURSOR_COLOR1 0x0a
#define SEQ_CURSOR_COLOR0 0x0b
#define SEQ_CURSOR_CONTROL 0x0c
#define SEQ_CURSOR_X_LOC_HI 0x0d
#define SEQ_CURSOR_X_LOC_LO 0x0e
#define SEQ_CURSOR_Y_LOC_HI 0x0f
#define SEQ_CURSOR_Y_LOC_LO 0x10
#define SEQ_CURSOR_X_INDEX 0x11
#define SEQ_CURSOR_Y_INDEX 0x12
#define SEQ_CURSOR_STORE_HI 0x13
#define SEQ_CURSOR_STORE_LO 0x14
#define SEQ_CURSOR_ST_OFF_HI 0x15
#define SEQ_CURSOR_ST_OFF_LO 0x16
#define SEQ_CURSOR_PIXELMASK 0x17
#define SEQ_PRIM_HOST_OFF_HI 0x18
#define SEQ_PRIM_HOST_OFF_LO 0x19
#define SEQ_LINEAR_0 0x1a
#define SEQ_LINEAR_1 0x1b
#define SEQ_SEC_HOST_OFF_HI 0x1c
#define SEQ_SEC_HOST_OFF_LO 0x1d
#define SEQ_EXTENDED_MEM_ENA 0x1e
#define SEQ_EXT_CLOCK_MODE 0x1f
#define SEQ_EXT_VIDEO_ADDR 0x20
#define SEQ_EXT_PIXEL_CNTL 0x21
#define SEQ_BUS_WIDTH_FEEDB 0x22
#define SEQ_PERF_SELECT 0x23
#define SEQ_COLOR_EXP_WFG 0x24
#define SEQ_COLOR_EXP_WBG 0x25
#define SEQ_EXT_RW_CONTROL 0x26
#define SEQ_MISC_FEATURE_SEL 0x27
#define SEQ_COLOR_KEY_CNTL 0x28
#define SEQ_COLOR_KEY_MATCH0 0x29
#define SEQ_COLOR_KEY_MATCH1 0x2a
#define SEQ_COLOR_KEY_MATCH2 0x2b
#define SEQ_UNKNOWN6 0x2c
#define SEQ_CRC_CONTROL 0x2d
#define SEQ_CRC_DATA_LOW 0x2e
#define SEQ_CRC_DATA_HIGH 0x2f
#define SEQ_MEMORY_MAP_CNTL 0x30
#define SEQ_ACM_APERTURE_1 0x31
#define SEQ_ACM_APERTURE_2 0x32
#define SEQ_ACM_APERTURE_3 0x33
#define SEQ_BIOS_UTILITY_0 0x3e
#define SEQ_BIOS_UTILITY_1 0x3f
/*
* Graphics Controller
*/
#define GFX_IDX 0x03ce
#define GFX_DATA 0x03cf
#define GFX_SET_RESET 0x00
#define GFX_ENABLE_SET_RESET 0x01
#define GFX_COLOR_COMPARE 0x02
#define GFX_DATA_ROTATE 0x03
#define GFX_READ_MAP_SELECT 0x04
#define GFX_GRAPHICS_MODE 0x05
#define GFX_MISC 0x06
#define GFX_COLOR_XCARE 0x07
#define GFX_BITMASK 0x08
/*
* CRT Controller
*/
#define CRT_IDX 0x03d4
#define CRT_DATA 0x03d5
#define CRT_HOR_TOTAL 0x00
#define CRT_HOR_DISP_ENA_END 0x01
#define CRT_START_HOR_BLANK 0x02
#define CRT_END_HOR_BLANK 0x03
#define CRT_START_HOR_RETR 0x04
#define CRT_END_HOR_RETR 0x05
#define CRT_VER_TOTAL 0x06
#define CRT_OVERFLOW 0x07
#define CRT_PRESET_ROW_SCAN 0x08
#define CRT_MAX_SCAN_LINE 0x09
#define CRT_CURSOR_START 0x0a
#define CRT_CURSOR_END 0x0b
#define CRT_START_ADDR_HIGH 0x0c
#define CRT_START_ADDR_LOW 0x0d
#define CRT_CURSOR_LOC_HIGH 0x0e
#define CRT_CURSOR_LOC_LOW 0x0f
#define CRT_START_VER_RETR 0x10
#define CRT_END_VER_RETR 0x11
#define CRT_VER_DISP_ENA_END 0x12
#define CRT_OFFSET 0x13
#define CRT_UNDERLINE_LOC 0x14
#define CRT_START_VER_BLANK 0x15
#define CRT_END_VER_BLANK 0x16
#define CRT_MODE_CONTROL 0x17
#define CRT_LINE_COMPARE 0x18
#define CRT_UNKNOWN1 0x19
#define CRT_UNKNOWN2 0x1a
#define CRT_UNKNOWN3 0x1b
#define CRT_UNKNOWN4 0x1c
#define CRT_UNKNOWN5 0x1d
#define CRT_UNKNOWN6 0x1e
#define CRT_UNKNOWN7 0x1f
#define CRT_UNKNOWN8 0x20
#define CRT_UNKNOWN9 0x21
#define CRT_UNKNOWN10 0x22
#define CRT_UNKNOWN11 0x23
#define CRT_UNKNOWN12 0x24
#define CRT_UNKNOWN13 0x25
#define CRT_UNKNOWN14 0x26
#define CRT_UNKNOWN15 0x27
#define CRT_UNKNOWN16 0x28
#define CRT_UNKNOWN17 0x29
#define CRT_UNKNOWN18 0x2a
#define CRT_UNKNOWN19 0x2b
#define CRT_UNKNOWN20 0x2c
#define CRT_UNKNOWN21 0x2d
#define CRT_UNKNOWN22 0x2e
#define CRT_UNKNOWN23 0x2f
#define CRT_EXT_HOR_TIMING1 0x30 /* NCR crt extensions */
#define CRT_EXT_START_ADDR 0x31
#define CRT_EXT_HOR_TIMING2 0x32
#define CRT_EXT_VER_TIMING 0x33
#define CRT_MONITOR_POWER 0x34
/*
* General Registers
*/
#define GREG_STATUS0_R 0x03c2
#define GREG_STATUS1_R 0x03da
#define GREG_MISC_OUTPUT_R 0x03cc
#define GREG_MISC_OUTPUT_W 0x03c2
#define GREG_FEATURE_CONTROL_R 0x03ca
#define GREG_FEATURE_CONTROL_W 0x03da
#define GREG_POS 0x0102
/*
* Attribute Controller
*/
#define ACT_IDX 0x03C0
#define ACT_ADDRESS_R 0x03C0
#define ACT_DATA 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_PALETTE0 0x00
#define ACT_PALETTE1 0x01
#define ACT_PALETTE2 0x02
#define ACT_PALETTE3 0x03
#define ACT_PALETTE4 0x04
#define ACT_PALETTE5 0x05
#define ACT_PALETTE6 0x06
#define ACT_PALETTE7 0x07
#define ACT_PALETTE8 0x08
#define ACT_PALETTE9 0x09
#define ACT_PALETTE10 0x0A
#define ACT_PALETTE11 0x0B
#define ACT_PALETTE12 0x0C
#define ACT_PALETTE13 0x0D
#define ACT_PALETTE14 0x0E
#define ACT_PALETTE15 0x0F
#define ACT_ATTR_MODE_CNTL 0x10
#define ACT_OVERSCAN_COLOR 0x11
#define ACT_COLOR_PLANE_ENA 0x12
#define ACT_HOR_PEL_PANNING 0x13
#define ACT_COLOR_SELECT 0x14
/*
* PLL
*/
#define PLL_IDX 0x83c8
#define PLL_DATA 0x83c9
/*
* Blitter operations
*/
#define Z3BLTclear 0x00 /* 0 */
#define Z3BLTand 0x80 /* src AND dst */
#define Z3BLTandReverse 0x40 /* src AND NOT dst */
#define Z3BLTcopy 0xc0 /* src */
#define Z3BLTandInverted 0x20 /* NOT src AND dst */
#define Z3BLTnoop 0xa0 /* dst */
#define Z3BLTxor 0x60 /* src XOR dst */
#define Z3BLTor 0xe0 /* src OR dst */
#define Z3BLTnor 0x10 /* NOT src AND NOT dst */
#define Z3BLTequiv 0x90 /* NOT src XOR dst */
#define Z3BLTinvert 0x50 /* NOT dst */
#define Z3BLTorReverse 0xd0 /* src OR NOT dst */
#define Z3BLTcopyInverted 0x30 /* NOT src */
#define Z3BLTorInverted 0xb0 /* NOT src OR dst */
#define Z3BLTnand 0x70 /* NOT src OR NOT dst */
#define Z3BLTset 0xf0 /* 1 */
drivers/video/sun3fb.c 已删除 100644 → 0
浏览文件 @ a268422d
此差异已折叠。
drivers/video/virgefb.c 已删除 100644 → 0
浏览文件 @ a268422d
此差异已折叠。
drivers/video/virgefb.h 已删除 100644 → 0
浏览文件 @ a268422d
/*
* linux/drivers/video/virgefb.h -- CyberVision64 definitions for the
* text console driver.
*
* Copyright (c) 1998 Alan Bair
*
* This file is based on the initial port to Linux of grf_cvreg.h:
*
* Copyright (c) 1997 Antonio Santos
*
* The original work is from the NetBSD CyberVision 64 framebuffer driver
* and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
* Permission to use the source of this driver was obtained from the
* author Michael Teske by Alan Bair.
*
* Copyright (c) 1995 Michael Teske
*
* History:
*
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* Enhanced register mapping (MMIO mode) */
#define S3_CRTC_ADR 0x03d4
#define S3_CRTC_DATA 0x03d5
#define S3_REG_LOCK2 0x39
#define S3_HGC_MODE 0x45
#define S3_HWGC_ORGX_H 0x46
#define S3_HWGC_ORGX_L 0x47
#define S3_HWGC_ORGY_H 0x48
#define S3_HWGC_ORGY_L 0x49
#define S3_HWGC_DX 0x4e
#define S3_HWGC_DY 0x4f
#define S3_LAW_CTL 0x58
/**************************************************/
/*
* Defines for the used register addresses (mw)
*
* NOTE: There are some registers that have different addresses when
* in mono or color mode. We only support color mode, and thus
* some addresses won't work in mono-mode!
*
* General and VGA-registers taken from retina driver. Fixed a few
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
*
*/
/* General Registers: */
#define GREG_MISC_OUTPUT_R 0x03CC
#define GREG_MISC_OUTPUT_W 0x03C2
#define GREG_FEATURE_CONTROL_R 0x03CA
#define GREG_FEATURE_CONTROL_W 0x03DA
#define GREG_INPUT_STATUS0_R 0x03C2
#define GREG_INPUT_STATUS1_R 0x03DA
/* Setup Registers: */
#define SREG_VIDEO_SUBS_ENABLE 0x03C3 /* virge */
/* Attribute Controller: */
#define ACT_ADDRESS 0x03C0
#define ACT_ADDRESS_R 0x03C1
#define ACT_ADDRESS_W 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_ID_PALETTE0 0x00
#define ACT_ID_PALETTE1 0x01
#define ACT_ID_PALETTE2 0x02
#define ACT_ID_PALETTE3 0x03
#define ACT_ID_PALETTE4 0x04
#define ACT_ID_PALETTE5 0x05
#define ACT_ID_PALETTE6 0x06
#define ACT_ID_PALETTE7 0x07
#define ACT_ID_PALETTE8 0x08
#define ACT_ID_PALETTE9 0x09
#define ACT_ID_PALETTE10 0x0A
#define ACT_ID_PALETTE11 0x0B
#define ACT_ID_PALETTE12 0x0C
#define ACT_ID_PALETTE13 0x0D
#define ACT_ID_PALETTE14 0x0E
#define ACT_ID_PALETTE15 0x0F
#define ACT_ID_ATTR_MODE_CNTL 0x10
#define ACT_ID_OVERSCAN_COLOR 0x11
#define ACT_ID_COLOR_PLANE_ENA 0x12
#define ACT_ID_HOR_PEL_PANNING 0x13
#define ACT_ID_COLOR_SELECT 0x14 /* virge PX_PADD pixel padding register */
/* Graphics Controller: */
#define GCT_ADDRESS 0x03CE
#define GCT_ADDRESS_R 0x03CF
#define GCT_ADDRESS_W 0x03CF
#define GCT_ID_SET_RESET 0x00
#define GCT_ID_ENABLE_SET_RESET 0x01
#define GCT_ID_COLOR_COMPARE 0x02
#define GCT_ID_DATA_ROTATE 0x03
#define GCT_ID_READ_MAP_SELECT 0x04
#define GCT_ID_GRAPHICS_MODE 0x05
#define GCT_ID_MISC 0x06
#define GCT_ID_COLOR_XCARE 0x07
#define GCT_ID_BITMASK 0x08
/* Sequencer: */
#define SEQ_ADDRESS 0x03C4
#define SEQ_ADDRESS_R 0x03C5
#define SEQ_ADDRESS_W 0x03C5
#define SEQ_ID_RESET 0x00
#define SEQ_ID_CLOCKING_MODE 0x01
#define SEQ_ID_MAP_MASK 0x02
#define SEQ_ID_CHAR_MAP_SELECT 0x03
#define SEQ_ID_MEMORY_MODE 0x04
#define SEQ_ID_UNKNOWN1 0x05
#define SEQ_ID_UNKNOWN2 0x06
#define SEQ_ID_UNKNOWN3 0x07
/* S3 extensions */
#define SEQ_ID_UNLOCK_EXT 0x08
#define SEQ_ID_EXT_SEQ_REG9 0x09 /* b7 = 1 extended reg access by MMIO only */
#define SEQ_ID_BUS_REQ_CNTL 0x0A
#define SEQ_ID_EXT_MISC_SEQ 0x0B
#define SEQ_ID_UNKNOWN4 0x0C
#define SEQ_ID_EXT_SEQ 0x0D
#define SEQ_ID_UNKNOWN5 0x0E
#define SEQ_ID_UNKNOWN6 0x0F
#define SEQ_ID_MCLK_LO 0x10
#define SEQ_ID_MCLK_HI 0x11
#define SEQ_ID_DCLK_LO 0x12
#define SEQ_ID_DCLK_HI 0x13
#define SEQ_ID_CLKSYN_CNTL_1 0x14
#define SEQ_ID_CLKSYN_CNTL_2 0x15
#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
#define SEQ_ID_RAMDAC_CNTL 0x18
#define SEQ_ID_MORE_MAGIC 0x1A
#define SEQ_ID_SIGNAL_SELECT 0x1C /* new for virge */
/* CRT Controller: */
#define CRT_ADDRESS 0x03D4
#define CRT_ADDRESS_R 0x03D5
#define CRT_ADDRESS_W 0x03D5
#define CRT_ID_HOR_TOTAL 0x00
#define CRT_ID_HOR_DISP_ENA_END 0x01
#define CRT_ID_START_HOR_BLANK 0x02
#define CRT_ID_END_HOR_BLANK 0x03
#define CRT_ID_START_HOR_RETR 0x04
#define CRT_ID_END_HOR_RETR 0x05
#define CRT_ID_VER_TOTAL 0x06
#define CRT_ID_OVERFLOW 0x07
#define CRT_ID_PRESET_ROW_SCAN 0x08
#define CRT_ID_MAX_SCAN_LINE 0x09
#define CRT_ID_CURSOR_START 0x0A
#define CRT_ID_CURSOR_END 0x0B
#define CRT_ID_START_ADDR_HIGH 0x0C
#define CRT_ID_START_ADDR_LOW 0x0D
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
#define CRT_ID_CURSOR_LOC_LOW 0x0F
#define CRT_ID_START_VER_RETR 0x10
#define CRT_ID_END_VER_RETR 0x11
#define CRT_ID_VER_DISP_ENA_END 0x12
#define CRT_ID_SCREEN_OFFSET 0x13
#define CRT_ID_UNDERLINE_LOC 0x14
#define CRT_ID_START_VER_BLANK 0x15
#define CRT_ID_END_VER_BLANK 0x16
#define CRT_ID_MODE_CONTROL 0x17
#define CRT_ID_LINE_COMPARE 0x18
#define CRT_ID_GD_LATCH_RBACK 0x22
#define CRT_ID_ACT_TOGGLE_RBACK 0x24
#define CRT_ID_ACT_INDEX_RBACK 0x26
/* S3 extensions: S3 VGA Registers */
#define CRT_ID_DEVICE_HIGH 0x2D
#define CRT_ID_DEVICE_LOW 0x2E
#define CRT_ID_REVISION 0x2F
#define CRT_ID_CHIP_ID_REV 0x30
#define CRT_ID_MEMORY_CONF 0x31
#define CRT_ID_BACKWAD_COMP_1 0x32
#define CRT_ID_BACKWAD_COMP_2 0x33
#define CRT_ID_BACKWAD_COMP_3 0x34
#define CRT_ID_REGISTER_LOCK 0x35
#define CRT_ID_CONFIG_1 0x36
#define CRT_ID_CONFIG_2 0x37
#define CRT_ID_REGISTER_LOCK_1 0x38
#define CRT_ID_REGISTER_LOCK_2 0x39
#define CRT_ID_MISC_1 0x3A
#define CRT_ID_DISPLAY_FIFO 0x3B
#define CRT_ID_LACE_RETR_START 0x3C
/* S3 extensions: System Control Registers */
#define CRT_ID_SYSTEM_CONFIG 0x40
#define CRT_ID_BIOS_FLAG 0x41
#define CRT_ID_LACE_CONTROL 0x42
#define CRT_ID_EXT_MODE 0x43
#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
#define CRT_ID_HWGC_FG_STACK 0x4A
#define CRT_ID_HWGC_BG_STACK 0x4B
#define CRT_ID_HWGC_START_AD_HI 0x4C
#define CRT_ID_HWGC_START_AD_LO 0x4D
#define CRT_ID_HWGC_DSTART_X 0x4E
#define CRT_ID_HWGC_DSTART_Y 0x4F
/* S3 extensions: System Extension Registers */
#define CRT_ID_EXT_SYS_CNTL_1 0x50 /* NOT a virge register */
#define CRT_ID_EXT_SYS_CNTL_2 0x51
#define CRT_ID_EXT_BIOS_FLAG_1 0x52
#define CRT_ID_EXT_MEM_CNTL_1 0x53
#define CRT_ID_EXT_MEM_CNTL_2 0x54
#define CRT_ID_EXT_DAC_CNTL 0x55
#define CRT_ID_EX_SYNC_1 0x56
#define CRT_ID_EX_SYNC_2 0x57
#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
#define CRT_ID_LAW_POS_HI 0x59
#define CRT_ID_LAW_POS_LO 0x5A
#define CRT_ID_GOUT_PORT 0x5C
#define CRT_ID_EXT_HOR_OVF 0x5D
#define CRT_ID_EXT_VER_OVF 0x5E
#define CRT_ID_EXT_MEM_CNTL_3 0x60 /* NOT a virge register */
#define CRT_ID_EXT_MEM_CNTL_4 0x61
#define CRT_ID_EX_SYNC_3 0x63 /* NOT a virge register */
#define CRT_ID_EXT_MISC_CNTL 0x65
#define CRT_ID_EXT_MISC_CNTL_1 0x66
#define CRT_ID_EXT_MISC_CNTL_2 0x67
#define CRT_ID_CONFIG_3 0x68
#define CRT_ID_EXT_SYS_CNTL_3 0x69
#define CRT_ID_EXT_SYS_CNTL_4 0x6A
#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
/* S3 virge extensions: more System Extension Registers */
#define CRT_ID_EXT_BIOS_FLAG_5 0x6D
#define CRT_ID_EXT_DAC_TEST 0x6E
#define CRT_ID_CONFIG_4 0x6F
/* Video DAC */
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
/* Miscellaneous Registers */
#define MR_SUBSYSTEM_STATUS_R 0x8504 /* new for virge */
#define MR_SUBSYSTEM_CNTL_W 0x8504 /* new for virge */
#define MR_ADVANCED_FUNCTION_CONTROL 0x850C /* new for virge */
/* Blitter */
#define BLT_COMMAND_SET 0xA500
#define BLT_SIZE_X_Y 0xA504
#define BLT_SRC_X_Y 0xA508
#define BLT_DEST_X_Y 0xA50C
#define BLT_SRC_BASE 0xa4d4
#define BLT_DEST_BASE 0xa4d8
#define BLT_CLIP_LEFT_RIGHT 0xa4dc
#define BLT_CLIP_TOP_BOTTOM 0xa4e0
#define BLT_SRC_DEST_STRIDE 0xa4e4
#define BLT_MONO_PATTERN_0 0xa4e8
#define BLT_MONO_PATTERN_1 0xa4ec
#define BLT_PATTERN_COLOR 0xa4f4
#define L2D_COMMAND_SET 0xA900
#define L2D_CLIP_LEFT_RIGHT 0xA8DC
#define L2D_CLIP_TOP_BOTTOM 0xA8E0
#define P2D_COMMAND_SET 0xAD00
#define P2D_CLIP_LEFT_RIGHT 0xACDC
#define P2D_CLIP_TOP_BOTTOM 0xACE0
#define CMD_NOP (0xf << 27) /* %1111 << 27, was 0x07 */
#define S3V_BITBLT (0x0 << 27)
#define S3V_RECTFILL (0x2 << 27)
#define S3V_AUTOEXE 0x01
#define S3V_HWCLIP 0x02
#define S3V_DRAW 0x20
#define S3V_DST_8BPP 0x00
#define S3V_DST_16BPP 0x04
#define S3V_DST_24BPP 0x08
#define S3V_MONO_PAT 0x100
#define S3V_BLT_COPY (0xcc<<17)
#define S3V_BLT_CLEAR (0x00<<17)
#define S3V_BLT_SET (0xff<<17)
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或