Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 dffc5837 编写于 作者: P Paul Bolle 提交者： Geert Uytterhoeven
浏览文件
操作

m68k: Remove five unused headers 

There are five entirely unused headers in arch/m68k/include/asm. Nothing
includes these headers. And a few tests found no hits for the things
they provide (which makes sense).

MC68332.h, mac_mouse.h, and mcfmbus.h are all unused since at least
v2.6.12-rc2 (I didn't bother looking further back than that).

apollodma.h is unused since v2.6.19: commit
2ed0ce5b ("m68k/Apollo: Remove obsolete
arch/m68k/apollo/dma.c") removed the last file interested in that
header.

And everything interested in <asm/sbus.h> was removed in the v2.6.28
release cycle. The last occurrence of "sbus.h" was deleted with commit
0c0db98b ("sparc: Remove
Documentation/sparc/sbus_drivers.txt"). I'm not sure whether anything
relevant for m68k was included in v2.6.27, but it doesn't really matter.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: Greg Ungerer<gerg@uclinux.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
上级 7df0d27f
隐藏空白更改
内联 并排
Showing with 0 addition and 545 deletion
arch/m68k/include/asm/MC68332.h 已删除 100644 → 0
浏览文件 @ 7df0d27f
/* include/asm-m68knommu/MC68332.h: '332 control registers
*
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
*
*/
#ifndef _MC68332_H_
#define _MC68332_H_
#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
#define WORD_REF(addr) (*((volatile unsigned short*)addr))
#define PORTE_ADDR 0xfffa11
#define PORTE BYTE_REF(PORTE_ADDR)
#define DDRE_ADDR 0xfffa15
#define DDRE BYTE_REF(DDRE_ADDR)
#define PEPAR_ADDR 0xfffa17
#define PEPAR BYTE_REF(PEPAR_ADDR)
#define PORTF_ADDR 0xfffa19
#define PORTF BYTE_REF(PORTF_ADDR)
#define DDRF_ADDR 0xfffa1d
#define DDRF BYTE_REF(DDRF_ADDR)
#define PFPAR_ADDR 0xfffa1f
#define PFPAR BYTE_REF(PFPAR_ADDR)
#define PORTQS_ADDR 0xfffc15
#define PORTQS BYTE_REF(PORTQS_ADDR)
#define DDRQS_ADDR 0xfffc17
#define DDRQS BYTE_REF(DDRQS_ADDR)
#define PQSPAR_ADDR 0xfffc16
#define PQSPAR BYTE_REF(PQSPAR_ADDR)
#define CSPAR0_ADDR 0xFFFA44
#define CSPAR0 WORD_REF(CSPAR0_ADDR)
#define CSPAR1_ADDR 0xFFFA46
#define CSPAR1 WORD_REF(CSPAR1_ADDR)
#define CSARBT_ADDR 0xFFFA48
#define CSARBT WORD_REF(CSARBT_ADDR)
#define CSOPBT_ADDR 0xFFFA4A
#define CSOPBT WORD_REF(CSOPBT_ADDR)
#define CSBAR0_ADDR 0xFFFA4C
#define CSBAR0 WORD_REF(CSBAR0_ADDR)
#define CSOR0_ADDR 0xFFFA4E
#define CSOR0 WORD_REF(CSOR0_ADDR)
#define CSBAR1_ADDR 0xFFFA50
#define CSBAR1 WORD_REF(CSBAR1_ADDR)
#define CSOR1_ADDR 0xFFFA52
#define CSOR1 WORD_REF(CSOR1_ADDR)
#define CSBAR2_ADDR 0xFFFA54
#define CSBAR2 WORD_REF(CSBAR2_ADDR)
#define CSOR2_ADDR 0xFFFA56
#define CSOR2 WORD_REF(CSOR2_ADDR)
#define CSBAR3_ADDR 0xFFFA58
#define CSBAR3 WORD_REF(CSBAR3_ADDR)
#define CSOR3_ADDR 0xFFFA5A
#define CSOR3 WORD_REF(CSOR3_ADDR)
#define CSBAR4_ADDR 0xFFFA5C
#define CSBAR4 WORD_REF(CSBAR4_ADDR)
#define CSOR4_ADDR 0xFFFA5E
#define CSOR4 WORD_REF(CSOR4_ADDR)
#define CSBAR5_ADDR 0xFFFA60
#define CSBAR5 WORD_REF(CSBAR5_ADDR)
#define CSOR5_ADDR 0xFFFA62
#define CSOR5 WORD_REF(CSOR5_ADDR)
#define CSBAR6_ADDR 0xFFFA64
#define CSBAR6 WORD_REF(CSBAR6_ADDR)
#define CSOR6_ADDR 0xFFFA66
#define CSOR6 WORD_REF(CSOR6_ADDR)
#define CSBAR7_ADDR 0xFFFA68
#define CSBAR7 WORD_REF(CSBAR7_ADDR)
#define CSOR7_ADDR 0xFFFA6A
#define CSOR7 WORD_REF(CSOR7_ADDR)
#define CSBAR8_ADDR 0xFFFA6C
#define CSBAR8 WORD_REF(CSBAR8_ADDR)
#define CSOR8_ADDR 0xFFFA6E
#define CSOR8 WORD_REF(CSOR8_ADDR)
#define CSBAR9_ADDR 0xFFFA70
#define CSBAR9 WORD_REF(CSBAR9_ADDR)
#define CSOR9_ADDR 0xFFFA72
#define CSOR9 WORD_REF(CSOR9_ADDR)
#define CSBAR10_ADDR 0xFFFA74
#define CSBAR10 WORD_REF(CSBAR10_ADDR)
#define CSOR10_ADDR 0xFFFA76
#define CSOR10 WORD_REF(CSOR10_ADDR)
#define CSOR_MODE_ASYNC 0x0000
#define CSOR_MODE_SYNC 0x8000
#define CSOR_MODE_MASK 0x8000
#define CSOR_BYTE_DISABLE 0x0000
#define CSOR_BYTE_UPPER 0x4000
#define CSOR_BYTE_LOWER 0x2000
#define CSOR_BYTE_BOTH 0x6000
#define CSOR_BYTE_MASK 0x6000
#define CSOR_RW_RSVD 0x0000
#define CSOR_RW_READ 0x0800
#define CSOR_RW_WRITE 0x1000
#define CSOR_RW_BOTH 0x1800
#define CSOR_RW_MASK 0x1800
#define CSOR_STROBE_DS 0x0400
#define CSOR_STROBE_AS 0x0000
#define CSOR_STROBE_MASK 0x0400
#define CSOR_DSACK_WAIT(x) (wait << 6)
#define CSOR_DSACK_FTERM (14 << 6)
#define CSOR_DSACK_EXTERNAL (15 << 6)
#define CSOR_DSACK_MASK 0x03c0
#define CSOR_SPACE_CPU 0x0000
#define CSOR_SPACE_USER 0x0010
#define CSOR_SPACE_SU 0x0020
#define CSOR_SPACE_BOTH 0x0030
#define CSOR_SPACE_MASK 0x0030
#define CSOR_IPL_ALL 0x0000
#define CSOR_IPL_PRIORITY(x) (x << 1)
#define CSOR_IPL_MASK 0x000e
#define CSOR_AVEC_ON 0x0001
#define CSOR_AVEC_OFF 0x0000
#define CSOR_AVEC_MASK 0x0001
#define CSBAR_ADDR(x) ((addr >> 11) << 3)
#define CSBAR_ADDR_MASK 0xfff8
#define CSBAR_BLKSIZE_2K 0x0000
#define CSBAR_BLKSIZE_8K 0x0001
#define CSBAR_BLKSIZE_16K 0x0002
#define CSBAR_BLKSIZE_64K 0x0003
#define CSBAR_BLKSIZE_128K 0x0004
#define CSBAR_BLKSIZE_256K 0x0005
#define CSBAR_BLKSIZE_512K 0x0006
#define CSBAR_BLKSIZE_1M 0x0007
#define CSBAR_BLKSIZE_MASK 0x0007
#define CSPAR_DISC 0
#define CSPAR_ALT 1
#define CSPAR_CS8 2
#define CSPAR_CS16 3
#define CSPAR_MASK 3
#define CSPAR0_CSBOOT(x) (x << 0)
#define CSPAR0_CS0(x) (x << 2)
#define CSPAR0_CS1(x) (x << 4)
#define CSPAR0_CS2(x) (x << 6)
#define CSPAR0_CS3(x) (x << 8)
#define CSPAR0_CS4(x) (x << 10)
#define CSPAR0_CS5(x) (x << 12)
#define CSPAR1_CS6(x) (x << 0)
#define CSPAR1_CS7(x) (x << 2)
#define CSPAR1_CS8(x) (x << 4)
#define CSPAR1_CS9(x) (x << 6)
#define CSPAR1_CS10(x) (x << 8)
#endif
arch/m68k/include/asm/apollodma.h 已删除 100644 → 0
浏览文件 @ 7df0d27f
/*
* linux/include/asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
*/
#ifndef _ASM_APOLLO_DMA_H
#define _ASM_APOLLO_DMA_H
#include <asm/apollohw.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
/*
* NOTES about DMA transfers:
*
* controller 1: channels 0-3, byte operations, ports 00-1F
* controller 2: channels 4-7, word operations, ports C0-DF
*
* - ALL registers are 8 bits only, regardless of transfer size
* - channel 4 is not used - cascades 1 into 2.
* - channels 0-3 are byte - addresses/counts are for physical bytes
* - channels 5-7 are word - addresses/counts are for physical words
* - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
* - transfer count loaded to registers is 1 less than actual count
* - controller 2 offsets are all even (2x offsets for controller 1)
* - page registers for 5-7 don't use data bit 0, represent 128K pages
* - page registers for 0-3 use bit 0, represent 64K pages
*
* DMA transfers are limited to the lower 16MB of _physical_ memory.
* Note that addresses loaded into registers must be _physical_ addresses,
* not logical addresses (which may differ if paging is active).
*
* Address mapping for channels 0-3:
*
* A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* P7 ... P0 A7 ... A0 A7 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Address mapping for channels 5-7:
*
* A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
* | ... | \ \ ... \ \ \ ... \ \
* | ... | \ \ ... \ \ \ ... \ (not used)
* | ... | \ \ ... \ \ \ ... \
* P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
* and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
* the hardware level, so odd-byte transfers aren't possible).
*
* Transfer count (_not # bytes_) is limited to 64K, represented as actual
* count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
* and up to 128K bytes may be transferred on channels 5-7 in one operation.
*
*/
#define MAX_DMA_CHANNELS 8
/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
/* DMA controller registers */
#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
#define DMA_AUTOINIT 0x10
#define DMA_8BIT 0
#define DMA_16BIT 1
#define DMA_BUSMASTER 2
extern spinlock_t dma_spin_lock;
static __inline__ unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
static __inline__ void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
/* enable/disable a specific DMA channel */
static __inline__ void enable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr, DMA1_MASK_REG);
else
dma_outb(dmanr & 3, DMA2_MASK_REG);
}
static __inline__ void disable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr | 4, DMA1_MASK_REG);
else
dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
}
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
* Use this once to initialize the FF to a known state.
* After that, keep track of it. :-)
* --- In order to do that, the DMA routines below should ---
* --- only be used while holding the DMA lock ! ---
*/
static __inline__ void clear_dma_ff(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(0, DMA1_CLEAR_FF_REG);
else
dma_outb(0, DMA2_CLEAR_FF_REG);
}
/* set mode (above) for a specific DMA channel */
static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
{
if (dmanr<=3)
dma_outb(mode | dmanr, DMA1_MODE_REG);
else
dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
}
/* Set transfer address & page bits for specific DMA channel.
* Assumes dma flipflop is clear.
*/
static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
{
if (dmanr <= 3) {
dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
} else {
dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
}
}
/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
* a specific DMA channel.
* You must ensure the parameters are valid.
* NOTE: from a manual: "the number of transfers is one more
* than the initial word count"! This is taken into account.
* Assumes dma flip-flop is clear.
* NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
*/
static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
{
count--;
if (dmanr <= 3) {
dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
} else {
dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
}
}
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
* still in progress will return unpredictable results.
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*
* Assumes DMA flip-flop is clear.
*/
static __inline__ int get_dma_residue(unsigned int dmanr)
{
unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
: ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
/* using short to get 16-bit wrap around */
unsigned short count;
count = 1 + dma_inb(io_port);
count += dma_inb(io_port) << 8;
return (dmanr<=3)? count : (count<<1);
}
/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
/* These are in arch/m68k/apollo/dma.c: */
extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
extern void dma_unmap_page(unsigned short dma_addr);
#endif /* _ASM_APOLLO_DMA_H */
arch/m68k/include/asm/mac_mouse.h 已删除 100644 → 0
浏览文件 @ 7df0d27f
#ifndef _ASM_MAC_MOUSE_H
#define _ASM_MAC_MOUSE_H
/*
* linux/include/asm-m68k/mac_mouse.h
* header file for Macintosh ADB mouse driver
* 27-10-97 Michael Schmitz
* copied from:
* header file for Atari Mouse driver
* by Robert de Vries (robert@and.nl) on 19Jul93
*/
struct mouse_status {
char buttons;
short dx;
short dy;
int ready;
int active;
wait_queue_head_t wait;
struct fasync_struct *fasyncptr;
};
#endif
arch/m68k/include/asm/mcfmbus.h 已删除 100644 → 0
浏览文件 @ 7df0d27f
/****************************************************************************/
/*
* mcfmbus.h -- Coldfire MBUS support defines.
*
* (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
*/
/****************************************************************************/
#ifndef mcfmbus_h
#define mcfmbus_h
#define MCFMBUS_BASE 0x280
#define MCFMBUS_IRQ_VECTOR 0x19
#define MCFMBUS_IRQ 0x1
#define MCFMBUS_CLK 0x3f
#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
#define MCFMBUS_ADDRESS 0x01
/*
* Define the 5307 MBUS register set addresses
*/
#define MCFMBUS_MADR 0x00
#define MCFMBUS_MFDR 0x04
#define MCFMBUS_MBCR 0x08
#define MCFMBUS_MBSR 0x0C
#define MCFMBUS_MBDR 0x10
#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
/*
* Define bit flags in Control Register
*/
#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
/*
* Define bit flags in Status Register
*/
#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
/*
* Define bit flags in DATA I/O Register
*/
#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
#define MBUSIOCSCLOCK 1
#define MBUSIOCGCLOCK 2
#define MBUSIOCSADDR 3
#define MBUSIOCGADDR 4
#define MBUSIOCSSLADDR 5
#define MBUSIOCGSLADDR 6
#define MBUSIOCSSUBADDR 7
#define MBUSIOCGSUBADDR 8
#endif
arch/m68k/include/asm/sbus.h 已删除 100644 → 0
浏览文件 @ 7df0d27f
/*
* some sbus structures and macros to make usage of sbus drivers possible
*/
#ifndef __M68K_SBUS_H
#define __M68K_SBUS_H
struct sbus_dev {
struct {
unsigned int which_io;
unsigned int phys_addr;
} reg_addrs[1];
};
/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
/* No SBUS on the Sun3, kludge -- sam */
static inline void _sbus_writeb(unsigned char val, unsigned long addr)
{
*(volatile unsigned char *)addr = val;
}
static inline unsigned char _sbus_readb(unsigned long addr)
{
return *(volatile unsigned char *)addr;
}
static inline void _sbus_writel(unsigned long val, unsigned long addr)
{
*(volatile unsigned long *)addr = val;
}
extern inline unsigned long _sbus_readl(unsigned long addr)
{
return *(volatile unsigned long *)addr;
}
#define sbus_readb(a) _sbus_readb((unsigned long)a)
#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
#define sbus_readl(a) _sbus_readl((unsigned long)a)
#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或