[PATCH] sl82c105: straighten up IDE control/status register caching

Straighten up the IDE control/status register caching -- you *really* can't
cache the shared register per-channel and hope that it won't get out ouf
sync.

Set the PIO fallback mode to PIO0 for the slave drive as well as master --
there was no point in having them different (most probably a resutl of
typo).

Do a bit of reformat and cleanup while at it...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/ide/pci/sl82c105.c

@@ -299,14 +299,14 @@ static void sl82c105_selectproc(ide_drive_t *drive)
 	//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));
 
 	mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
-	old = val = *((u32 *)&hwif->hwif_data);
+	old = val = (u32)pci_get_drvdata(dev);
 	if (drive->using_dma)
 		val &= ~mask;
 	else
 		val |= mask;
 	if (old != val) {
 		pci_write_config_dword(dev, 0x40, val);	
-		*((u32 *)&hwif->hwif_data) = val;
+		pci_set_drvdata(dev, (void *)val);
 	}
 }
 
@@ -316,14 +316,13 @@ static void sl82c105_selectproc(ide_drive_t *drive)
  */
 static void sl82c105_resetproc(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = HWIF(drive);
-	struct pci_dev *dev = hwif->pci_dev;
+	struct pci_dev *dev = HWIF(drive)->pci_dev;
 	u32 val;
 
 	DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
 
 	pci_read_config_dword(dev, 0x40, &val);
-	*((u32 *)&hwif->hwif_data) = val;
+	pci_set_drvdata(dev, (void *)val);
 }
 	
 /*
@@ -394,6 +393,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
 	pci_read_config_dword(dev, 0x40, &val);
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
+	pci_set_drvdata(dev, (void *)val);
 
 	return dev->irq;
 }
@@ -404,30 +404,25 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
 
 static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = hwif->pci_dev;
 	unsigned int rev;
 	u8 dma_state;
-	u32 val;
-	
+
 	DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
 
 	hwif->tuneproc = tune_sl82c105;
 	hwif->selectproc = sl82c105_selectproc;
 	hwif->resetproc = sl82c105_resetproc;
-	
-	/* Default to PIO 0 for fallback unless tuned otherwise,
-	 * we always autotune PIO, this is done before DMA is
-	 * checked, so there is no risk of accidentally disabling
-	 * DMA
-	  */
+
+	/*
+	 * Default to PIO 0 for fallback unless tuned otherwise.
+	 * We always autotune PIO,  this is done before DMA is checked,
+	 * so there's no risk of accidentally disabling DMA
+	 */
 	hwif->drives[0].pio_speed = XFER_PIO_0;
 	hwif->drives[0].autotune = 1;
-	hwif->drives[1].pio_speed = XFER_PIO_1;
+	hwif->drives[1].pio_speed = XFER_PIO_0;
 	hwif->drives[1].autotune = 1;
 
-	pci_read_config_dword(dev, 0x40, &val);
-	*((u32 *)&hwif->hwif_data) = val;
-	
 	hwif->atapi_dma = 0;
 	hwif->mwdma_mask = 0;
 	hwif->swdma_mask = 0;