Documentation: dt: net: fix spelling mistakes

Signed-off-by: NEric Engestrom <eric@engestrom.ch>
Signed-off-by: NRob Herring <robh@kernel.org>

Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt

@@ -8,7 +8,7 @@ Required properties:
   specifies a reference to the associating hardware driver node.
   see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
-  connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
+  connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
   are called debug ports.
 
   The remaining 6 PHYs are taken according to the mode of DSAF.

Documentation/devicetree/bindings/net/stmmac.txt

@@ -51,8 +51,8 @@ Optional properties:
 			   AXI register inside the DMA module:
 	- snps,lpi_en: enable Low Power Interface
 	- snps,xit_frm: unlock on WoL
-	- snps,wr_osr_lmt: max write oustanding req. limit
-	- snps,rd_osr_lmt: max read oustanding req. limit
+	- snps,wr_osr_lmt: max write outstanding req. limit
+	- snps,rd_osr_lmt: max read outstanding req. limit
 	- snps,kbbe: do not cross 1KiB boundary.
 	- snps,axi_all: align address
 	- snps,blen: this is a vector of supported burst length.

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -2,7 +2,7 @@
 
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
-	- ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
+	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
 		for applicable values
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
 		for applicable values