提交 dcfcf2c2 编写于 作者: X Xiubo Li 提交者: Mark Brown

ASoC: fsl: fix typos for sound/soc/fsl/*

There are too much noise about the typos for fsl's drivers. So I fix
all the typos here in this patch in almost every file I touched.
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 0d69e0dd
......@@ -182,7 +182,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev)
);
} else {
if (np) {
/* The eukrea,asoc-tlv320 driver was explicitely
/* The eukrea,asoc-tlv320 driver was explicitly
* requested (through the device tree).
*/
dev_err(&pdev->dev,
......
......@@ -45,7 +45,7 @@
#define FSL_SAI_xFR(tx) (tx ? FSL_SAI_TFR : FSL_SAI_RFR)
#define FSL_SAI_xMR(tx) (tx ? FSL_SAI_TMR : FSL_SAI_RMR)
/* SAI Transmit/Recieve Control Register */
/* SAI Transmit/Receive Control Register */
#define FSL_SAI_CSR_TERE BIT(31)
#define FSL_SAI_CSR_FR BIT(25)
#define FSL_SAI_CSR_SR BIT(24)
......@@ -67,10 +67,10 @@
#define FSL_SAI_CSR_FRIE BIT(8)
#define FSL_SAI_CSR_FRDE BIT(0)
/* SAI Transmit and Recieve Configuration 1 Register */
/* SAI Transmit and Receive Configuration 1 Register */
#define FSL_SAI_CR1_RFW_MASK 0x1f
/* SAI Transmit and Recieve Configuration 2 Register */
/* SAI Transmit and Receive Configuration 2 Register */
#define FSL_SAI_CR2_SYNC BIT(30)
#define FSL_SAI_CR2_MSEL_MASK (0x3 << 26)
#define FSL_SAI_CR2_MSEL_BUS 0
......@@ -82,12 +82,12 @@
#define FSL_SAI_CR2_BCD_MSTR BIT(24)
#define FSL_SAI_CR2_DIV_MASK 0xff
/* SAI Transmit and Recieve Configuration 3 Register */
/* SAI Transmit and Receive Configuration 3 Register */
#define FSL_SAI_CR3_TRCE BIT(16)
#define FSL_SAI_CR3_WDFL(x) (x)
#define FSL_SAI_CR3_WDFL_MASK 0x1f
/* SAI Transmit and Recieve Configuration 4 Register */
/* SAI Transmit and Receive Configuration 4 Register */
#define FSL_SAI_CR4_FRSZ(x) (((x) - 1) << 16)
#define FSL_SAI_CR4_FRSZ_MASK (0x1f << 16)
#define FSL_SAI_CR4_SYWD(x) (((x) - 1) << 8)
......@@ -97,7 +97,7 @@
#define FSL_SAI_CR4_FSP BIT(1)
#define FSL_SAI_CR4_FSD_MSTR BIT(0)
/* SAI Transmit and Recieve Configuration 5 Register */
/* SAI Transmit and Receive Configuration 5 Register */
#define FSL_SAI_CR5_WNW(x) (((x) - 1) << 24)
#define FSL_SAI_CR5_WNW_MASK (0x1f << 24)
#define FSL_SAI_CR5_W0W(x) (((x) - 1) << 16)
......
......@@ -707,7 +707,7 @@ static int fsl_spdif_subcode_get(struct snd_kcontrol *kcontrol,
return ret;
}
/* Q-subcode infomation. The byte size is SPDIF_UBITS_SIZE/8 */
/* Q-subcode information. The byte size is SPDIF_UBITS_SIZE/8 */
static int fsl_spdif_qinfo(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
......@@ -739,7 +739,7 @@ static int fsl_spdif_qget(struct snd_kcontrol *kcontrol,
return ret;
}
/* Valid bit infomation */
/* Valid bit information */
static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
......@@ -767,7 +767,7 @@ static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol,
return 0;
}
/* DPLL lock infomation */
/* DPLL lock information */
static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
......
......@@ -156,7 +156,7 @@ struct fsl_ssi_soc_data {
*
* @dbg_stats: Debugging statistics
*
* @soc: SoC specifc data
* @soc: SoC specific data
*/
struct fsl_ssi_private {
struct regmap *regs;
......@@ -1210,7 +1210,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
}
}
/* For those SLAVE implementations, we ingore non-baudclk cases
/* For those SLAVE implementations, we ignore non-baudclk cases
* and, instead, abandon MASTER mode that needs baud clock.
*/
ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册