Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 dc2af52c 编写于 作者: M Mark Brown
浏览文件
操作

Merge tag 'v3.4-rc7' into for-3.5 

Linux 3.4-rc7

Conflicts):
	drivers/base/regmap/regmap.c         (overlap with bug fixes)
	sound/soc/blackfin/bf5xx-ssm2602.c   (overlap with bug fixes)
上级 f1992dde 36be5051
展开全部 隐藏空白更改
内联 并排
Showing with 7355 addition and 4758 deletion
Documentation/ABI/testing/sysfs-bus-hsi 0 → 100644
浏览文件 @ dc2af52c
What: /sys/bus/hsi
Date: April 2012
KernelVersion: 3.4
Contact: Carlos Chinea <carlos.chinea@nokia.com>
Description:
High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.
The bus will be populated with devices (hsi_clients) representing
the protocols available in the system. Bus drivers implement
those protocols.
What: /sys/bus/hsi/devices/.../modalias
Date: April 2012
KernelVersion: 3.4
Contact: Carlos Chinea <carlos.chinea@nokia.com>
Description: Stores the same MODALIAS value emitted by uevent
Format: hsi:<hsi_client device name>
Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
浏览文件 @ dc2af52c
<refentry id="V4L2-PIX-FMT-NV12M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
......
Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
浏览文件 @ dc2af52c
<refentry id="V4L2-PIX-FMT-YUV420M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
......
Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt
浏览文件 @ dc2af52c
* Calxeda SATA Controller
* AHCI SATA Controller
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : compatible list, contains "calxeda,hb-ahci"
- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
......@@ -14,4 +14,3 @@ Example:
reg = <0xffe08000 0x1000>;
interrupts = <115>;
};
Documentation/devicetree/bindings/sound/sgtl5000.txt
浏览文件 @ dc2af52c
......@@ -3,6 +3,8 @@
Required properties:
- compatible : "fsl,sgtl5000".
- reg : the I2C address of the device
Example:
codec: sgtl5000@0a {
......
Documentation/networking/ip-sysctl.txt
浏览文件 @ dc2af52c
......@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
Possible values are [-31, 31], inclusive.
Default: 2
Default: 1
tcp_allowed_congestion_control - STRING
Show/set the congestion control choices available to non-privileged
......@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables
automatic tuning of that socket's receive buffer size, in which
case this value is ignored.
Default: between 87380B and 4MB, depending on RAM size.
Default: between 87380B and 6MB, depending on RAM size.
tcp_sack - BOOLEAN
Enable select acknowledgments (SACKS).
......
Documentation/power/freezing-of-tasks.txt
浏览文件 @ dc2af52c
......@@ -9,7 +9,7 @@ architectures).
II. How does it work?
There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
and PF_FREEZER_SKIP (the last one is auxiliary). The tasks that have
PF_NOFREEZE unset (all user space processes and some kernel threads) are
regarded as 'freezable' and treated in a special way before the system enters a
......@@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows
we only consider hibernation, but the description also applies to suspend).
Namely, as the first step of the hibernation procedure the function
freeze_processes() (defined in kernel/power/process.c) is called. It executes
try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
either wakes them up, if they are kernel threads, or sends fake signals to them,
if they are user space processes. A task that has TIF_FREEZE set, should react
to it by calling the function called __refrigerator() (defined in
kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
Then, we say that the task is 'frozen' and therefore the set of functions
handling this mechanism is referred to as 'the freezer' (these functions are
defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
User space processes are generally frozen before kernel threads.
freeze_processes() (defined in kernel/power/process.c) is called. A system-wide
variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
whether the system is to undergo a freezing operation. And freeze_processes()
sets this variable. After this, it executes try_to_freeze_tasks() that sends a
fake signal to all user space processes, and wakes up all the kernel threads.
All freezable tasks must react to that by calling try_to_freeze(), which
results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
it loop until PF_FROZEN is cleared for it. Then, we say that the task is
'frozen' and therefore the set of functions handling this mechanism is referred
to as 'the freezer' (these functions are defined in kernel/power/process.c,
kernel/freezer.c & include/linux/freezer.h). User space processes are generally
frozen before kernel threads.
__refrigerator() must not be called directly. Instead, use the
try_to_freeze() function (defined in include/linux/freezer.h), that checks
the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
flag is set.
if the task is to be frozen and makes the task enter __refrigerator().
For user space processes try_to_freeze() is called automatically from the
signal-handling code, but the freezable kernel threads need to call it
explicitly in suitable places or use the wait_event_freezable() or
wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
that combine interruptible sleep with checking if TIF_FREEZE is set and calling
try_to_freeze(). The main loop of a freezable kernel thread may look like the
following one:
that combine interruptible sleep with checking if the task is to be frozen and
calling try_to_freeze(). The main loop of a freezable kernel thread may look
like the following one:
set_freezable();
do {
......@@ -53,7 +54,7 @@ following one:
(from drivers/usb/core/hub.c::hub_thread()).
If a freezable kernel thread fails to call try_to_freeze() after the freezer has
set TIF_FREEZE for it, the freezing of tasks will fail and the entire
initiated a freezing operation, the freezing of tasks will fail and the entire
hibernation operation will be cancelled. For this reason, freezable kernel
threads must call try_to_freeze() somewhere or use one of the
wait_event_freezable() and wait_event_freezable_timeout() macros.
......
Documentation/security/keys.txt
浏览文件 @ dc2af52c
......@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
The key service provides a number of features besides keys:
(*) The key service defines two special key types:
(*) The key service defines three special key types:
(+) "keyring"
......@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
blobs of data. These can be created, updated and read by userspace,
and aren't intended for use by kernel services.
(+) "logon"
Like a "user" key, a "logon" key has a payload that is an arbitrary
blob of data. It is intended as a place to store secrets which are
accessible to the kernel but not to userspace programs.
The description can be arbitrary, but must be prefixed with a non-zero
length string that describes the key "subclass". The subclass is
separated from the rest of the description by a ':'. "logon" keys can
be created and updated from userspace, but the payload is only
readable from kernel space.
(*) Each process subscribes to three keyrings: a thread-specific keyring, a
process-specific keyring, and a session-specific keyring.
......
MAINTAINERS
浏览文件 @ dc2af52c
......@@ -1968,10 +1968,9 @@ S: Maintained
F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
M: Dave Jones <davej@redhat.com>
M: Rafael J. Wysocki <rjw@sisk.pl>
L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
L: linux-pm@vger.kernel.org
S: Maintained
F: drivers/cpufreq/
F: include/linux/cpufreq.h
......@@ -2321,9 +2320,9 @@ S: Supported
F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
M: Rob Landley <rob@landley.net>
L: linux-doc@vger.kernel.org
T: quilt http://xenotime.net/kernel-doc-patches/current/
T: TBD
S: Maintained
F: Documentation/
......@@ -3592,6 +3591,7 @@ S: Supported
F: drivers/net/wireless/iwlegacy/
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com>
M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
......@@ -4036,6 +4036,7 @@ F: Documentation/scsi/53c700.txt
F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Bryan Wu <bryan.wu@canonical.com>
M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
F: drivers/leds/
......@@ -5891,11 +5892,11 @@ F: Documentation/scsi/st.txt
F: drivers/scsi/st*
SCTP PROTOCOL
M: Vlad Yasevich <vladislav.yasevich@hp.com>
M: Vlad Yasevich <vyasevich@gmail.com>
M: Sridhar Samudrala <sri@us.ibm.com>
L: linux-sctp@vger.kernel.org
W: http://lksctp.sourceforge.net
S: Supported
S: Maintained
F: Documentation/networking/sctp.txt
F: include/linux/sctp.h
F: include/net/sctp/
......@@ -7584,8 +7585,8 @@ F: Documentation/filesystems/xfs.txt
F: fs/xfs/
XILINX AXI ETHERNET DRIVER
M: Ariane Keller <ariane.keller@tik.ee.ethz.ch>
M: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
M: Anirudha Sarangi <anirudh@xilinx.com>
M: John Linn <John.Linn@xilinx.com>
S: Maintained
F: drivers/net/ethernet/xilinx/xilinx_axienet*
......
Makefile
浏览文件 @ dc2af52c
VERSION = 3
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
......
arch/alpha/Kconfig
浏览文件 @ dc2af52c
......@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
config VGA_HOSE
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
default y
help
Support VGA on an arbitrary hose; needed for several platforms
......
arch/alpha/include/asm/rtc.h
浏览文件 @ dc2af52c
#ifndef _ALPHA_RTC_H
#define _ALPHA_RTC_H
#if defined(CONFIG_ALPHA_GENERIC)
#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
|| defined(CONFIG_ALPHA_GENERIC)
# define get_rtc_time alpha_mv.rtc_get_time
# define set_rtc_time alpha_mv.rtc_set_time
#else
# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
# define get_rtc_time marvel_get_rtc_time
# define set_rtc_time marvel_set_rtc_time
# endif
#endif
#include <asm-generic/rtc.h>
......
arch/alpha/kernel/core_tsunami.c
浏览文件 @ dc2af52c
......@@ -11,6 +11,7 @@
#include <asm/core_tsunami.h>
#undef __EXTERN_INLINE
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
......
arch/alpha/kernel/sys_marvel.c
浏览文件 @ dc2af52c
......@@ -317,7 +317,7 @@ marvel_init_irq(void)
}
static int
marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_controller *hose = dev->sysdata;
struct io7_port *io7_port = hose->sysdata;
......
arch/arm/Kconfig
浏览文件 @ dc2af52c
......@@ -1186,6 +1186,15 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
config ARM_ERRATA_326103
bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
depends on CPU_V6
help
Executing a SWP instruction to read-only memory does not set bit 11
of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
treat the access as a read, preventing a COW from occurring and
causing the faulting task to livelock.
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
depends on CPU_V6 || CPU_V6K
......
arch/arm/boot/dts/msm8660-surf.dts
浏览文件 @ dc2af52c
......@@ -10,7 +10,7 @@
intc: interrupt-controller@02080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
......@@ -19,6 +19,6 @@
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
interrupts = <195>;
interrupts = <0 195 0x0>;
};
};
arch/arm/boot/dts/versatile-ab.dts
浏览文件 @ dc2af52c
......@@ -173,7 +173,7 @@
mmc@5000 {
compatible = "arm,primecell";
reg = < 0x5000 0x1000>;
interrupts = <22>;
interrupts = <22 34>;
};
kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
......
arch/arm/boot/dts/versatile-pb.dts
浏览文件 @ dc2af52c
......@@ -41,7 +41,7 @@
mmc@b000 {
compatible = "arm,primecell";
reg = <0xb000 0x1000>;
interrupts = <23>;
interrupts = <23 34>;
};
};
};
......
arch/arm/configs/imx_v4_v5_defconfig
浏览文件 @ dc2af52c
......@@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y
......
arch/arm/configs/mini2440_defconfig
浏览文件 @ dc2af52c
......@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_ARCH_S3C24XX=y
# CONFIG_CPU_S3C2410 is not set
CONFIG_CPU_S3C2440=y
CONFIG_S3C_ADC=y
CONFIG_S3C24XX_PWM=y
CONFIG_MACH_MINI2440=y
......
arch/arm/configs/u8500_defconfig
浏览文件 @ dc2af52c
......@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
......@@ -39,7 +37,6 @@ CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
......@@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_POWER_SUPPLY=y
CONFIG_AB8500_BM=y
CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
......
arch/arm/include/asm/thread_info.h
浏览文件 @ dc2af52c
......@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
extern void vfp_sync_hwstate(struct thread_info *);
extern void vfp_flush_hwstate(struct thread_info *);
struct user_vfp;
struct user_vfp_exc;
extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
struct user_vfp_exc __user *);
extern int vfp_restore_user_hwstate(struct user_vfp __user *,
struct user_vfp_exc __user *);
#endif
/*
......
arch/arm/include/asm/tls.h
浏览文件 @ dc2af52c
......@@ -7,6 +7,8 @@
.macro set_tls_v6k, tp, tmp1, tmp2
mcr p15, 0, \tp, c13, c0, 3 @ set TLS register
mov \tmp1, #0
mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
.endm
.macro set_tls_v6, tp, tmp1, tmp2
......@@ -15,6 +17,8 @@
mov \tmp2, #0xffff0fff
tst \tmp1, #HWCAP_TLS @ hardware TLS available?
mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
movne \tmp1, #0
mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0
.endm
......
arch/arm/kernel/irq.c
浏览文件 @ dc2af52c
......@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
}
c = irq_data_get_irq_chip(d);
if (c->irq_set_affinity)
c->irq_set_affinity(d, affinity, true);
else
if (!c->irq_set_affinity)
pr_debug("IRQ%u: unable to set affinity\n", d->irq);
else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
cpumask_copy(d->affinity, affinity);
return ret;
}
......
arch/arm/kernel/ptrace.c
浏览文件 @ dc2af52c
......@@ -906,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request,
return ret;
}
#ifdef __ARMEB__
#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
#else
#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
#endif
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
/*
* Save IP. IP is used to denote syscall entry/exit:
* IP = 0 -> entry, = 1 -> exit
*/
ip = regs->ARM_ip;
regs->ARM_ip = why;
if (!ip)
if (why)
audit_syscall_exit(regs);
else
audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))
......@@ -936,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
current_thread_info()->syscall = scno;
/*
* IP is used to denote syscall entry/exit:
* IP = 0 -> entry, =1 -> exit
*/
ip = regs->ARM_ip;
regs->ARM_ip = why;
/* the 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
......
arch/arm/kernel/signal.c
浏览文件 @ dc2af52c
......@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
static int preserve_vfp_context(struct vfp_sigframe __user *frame)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *h = &thread->vfpstate.hard;
const unsigned long magic = VFP_MAGIC;
const unsigned long size = VFP_STORAGE_SIZE;
int err = 0;
vfp_sync_hwstate(thread);
__put_user_error(magic, &frame->magic, err);
__put_user_error(size, &frame->size, err);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
sizeof(h->fpregs));
/*
* Copy the status and control register.
*/
__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
/*
* Copy the exception registers.
*/
__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
if (err)
return -EFAULT;
return err ? -EFAULT : 0;
return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
}
static int restore_vfp_context(struct vfp_sigframe __user *frame)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *h = &thread->vfpstate.hard;
unsigned long magic;
unsigned long size;
unsigned long fpexc;
int err = 0;
__get_user_error(magic, &frame->magic, err);
......@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
vfp_flush_hwstate(thread);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
sizeof(h->fpregs));
/*
* Copy the status and control register.
*/
__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
/*
* Sanitise and restore the exception registers.
*/
__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
/* Ensure the VFP is enabled. */
fpexc |= FPEXC_EN;
/* Ensure FPINST2 is invalid and the exception flag is cleared. */
fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
h->fpexc = fpexc;
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
return err ? -EFAULT : 0;
return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
}
#endif
......
arch/arm/kernel/smp.c
浏览文件 @ dc2af52c
......@@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
printk("CPU%u: Booted secondary processor\n", cpu);
/*
* All kernel threads share the same mm context; grab a
* reference and switch to it.
......@@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
enter_lazy_tlb(mm, current);
local_flush_tlb_all();
printk("CPU%u: Booted secondary processor\n", cpu);
cpu_init();
preempt_disable();
trace_hardirqs_off();
......@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
local_fiq_disable();
local_irq_disable();
#ifdef CONFIG_HOTPLUG_CPU
platform_cpu_kill(cpu);
#endif
while (1)
cpu_relax();
}
......@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
}
#ifdef CONFIG_HOTPLUG_CPU
static void smp_kill_cpus(cpumask_t *mask)
{
unsigned int cpu;
for_each_cpu(cpu, mask)
platform_cpu_kill(cpu);
}
#else
static void smp_kill_cpus(cpumask_t *mask) { }
#endif
void smp_send_stop(void)
{
unsigned long timeout;
struct cpumask mask;
if (num_online_cpus() > 1) {
struct cpumask mask;
cpumask_copy(&mask, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &mask);
smp_cross_call(&mask, IPI_CPU_STOP);
}
cpumask_copy(&mask, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &mask);
smp_cross_call(&mask, IPI_CPU_STOP);
/* Wait up to one second for other CPUs to stop */
timeout = USEC_PER_SEC;
......@@ -595,6 +599,8 @@ void smp_send_stop(void)
if (num_online_cpus() > 1)
pr_warning("SMP: failed to stop secondary CPUs\n");
smp_kill_cpus(&mask);
}
/*
......
arch/arm/kernel/smp_twd.c
浏览文件 @ dc2af52c
......@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
* The twd clock events must be reprogrammed to account for the new
* frequency. The timer is local to a cpu, so cross-call to the
* changing cpu.
*
* Only wait for it to finish, if the cpu is active to avoid
* deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
* booting of that cpu.
*/
if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
smp_call_function_single(freqs->cpu, twd_update_frequency,
NULL, cpu_active(freqs->cpu));
NULL, 1);
return NOTIFY_OK;
}
......
arch/arm/kernel/sys_arm.c
浏览文件 @ dc2af52c
......@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
"Ir" (THREAD_START_SP - sizeof(regs)),
"r" (&regs),
"Ir" (sizeof(regs))
: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
out:
return ret;
......
arch/arm/mach-at91/at91rm9200_devices.c
浏览文件 @ dc2af52c
......@@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
......
arch/arm/mach-at91/at91rm9200_time.c
浏览文件 @ dc2af52c
......@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <asm/mach/time.h>
......@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
};
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
void __init at91rm9200_ioremap_st(u32 addr)
{
......
arch/arm/mach-at91/board-rm9200ek.c
浏览文件 @ dc2af52c
......@@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE SZ_2M
#define EK_FLASH_SIZE SZ_8M
static struct physmap_flash_data ek_flash_data = {
.width = 2,
......
arch/arm/mach-at91/board-sam9261ek.c
浏览文件 @ dc2af52c
......@@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
......@@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
struct resource *r = &dm9000_resource[2];
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(0, 2, &dm9000_smc_config);
......@@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
platform_device_register(&dm9000_device);
}
#else
......
arch/arm/mach-at91/clock.c
浏览文件 @ dc2af52c
......@@ -35,6 +35,7 @@
#include "generic.h"
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
/*
* There's a lot more which can be done with clocks, including cpufreq
......
arch/arm/mach-at91/include/mach/at91_pmc.h
浏览文件 @ dc2af52c
......@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
#define at91_pmc_write(field, value) \
__raw_writel(value, at91_pmc_base + field)
#else
.extern at91_aic_base
.extern at91_pmc_base
#endif
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
......
arch/arm/mach-at91/setup.c
浏览文件 @ dc2af52c
......@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
}
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
......@@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
......
arch/arm/mach-bcmring/core.c
浏览文件 @ dc2af52c
......@@ -52,8 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
......
arch/arm/mach-exynos/Kconfig
浏览文件 @ dc2af52c
......@@ -232,6 +232,9 @@ config MACH_ARMLEX4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
select S5P_HRT
select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
select S5P_GPIO_INT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
......
arch/arm/mach-exynos/clock-exynos4.c
浏览文件 @ dc2af52c
......@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
.ctrlbit = (1 << 3),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.devname = "exynos4-sdhci.0",
.parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.1",
.devname = "exynos4-sdhci.1",
.parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.2",
.devname = "exynos4-sdhci.2",
.parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.3",
.devname = "exynos4-sdhci.3",
.parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 8),
......@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.0",
.devname = "exynos4-sdhci.0",
.parent = &exynos4_clk_dout_mmc0.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 0),
......@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.1",
.devname = "exynos4-sdhci.1",
.parent = &exynos4_clk_dout_mmc1.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 4),
......@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.2",
.devname = "exynos4-sdhci.2",
.parent = &exynos4_clk_dout_mmc2.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 8),
......@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.3",
.devname = "exynos4-sdhci.3",
.parent = &exynos4_clk_dout_mmc3.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 12),
......@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
......
arch/arm/mach-exynos/clock-exynos5.c
浏览文件 @ dc2af52c
......@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
.ctrlbit = (1 << 20),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.devname = "exynos4-sdhci.0",
.parent = &exynos5_clk_aclk_200.clk,
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 12),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.1",
.devname = "exynos4-sdhci.1",
.parent = &exynos5_clk_aclk_200.clk,
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 13),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.2",
.devname = "exynos4-sdhci.2",
.parent = &exynos5_clk_aclk_200.clk,
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 14),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.3",
.devname = "exynos4-sdhci.3",
.parent = &exynos5_clk_aclk_200.clk,
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 15),
......@@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = {
.name = "dma",
.devname = "dma-pl330.1",
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
.ctrlbit = (1 << 2),
};
static struct clk exynos5_clk_mdma1 = {
......@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.0",
.devname = "exynos4-sdhci.0",
.parent = &exynos5_clk_dout_mmc0.clk,
.enable = exynos5_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 0),
......@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.1",
.devname = "exynos4-sdhci.1",
.parent = &exynos5_clk_dout_mmc1.clk,
.enable = exynos5_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 4),
......@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.2",
.devname = "exynos4-sdhci.2",
.parent = &exynos5_clk_dout_mmc2.clk,
.enable = exynos5_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 8),
......@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
.clk = {
.name = "sclk_mmc",
.devname = "s3c-sdhci.3",
.devname = "exynos4-sdhci.3",
.parent = &exynos5_clk_dout_mmc3.clk,
.enable = exynos5_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 12),
......@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
......
arch/arm/mach-exynos/common.c
浏览文件 @ dc2af52c
......@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
s3c_fimc_setname(2, "exynos4-fimc");
s3c_fimc_setname(3, "exynos4-fimc");
s3c_sdhci_setname(0, "exynos4-sdhci");
s3c_sdhci_setname(1, "exynos4-sdhci");
s3c_sdhci_setname(2, "exynos4-sdhci");
s3c_sdhci_setname(3, "exynos4-sdhci");
/* The I2C bus controllers are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
......@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
s3c_sdhci_setname(0, "exynos4-sdhci");
s3c_sdhci_setname(1, "exynos4-sdhci");
s3c_sdhci_setname(2, "exynos4-sdhci");
s3c_sdhci_setname(3, "exynos4-sdhci");
/* The I2C bus controllers are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
......@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
{
int irq;
gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
#ifdef CONFIG_OF
of_irq_init(exynos4_dt_irq_match);
#endif
for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
......
arch/arm/mach-exynos/dev-dwmci.c
浏览文件 @ dc2af52c
......@@ -16,6 +16,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mmc/dw_mmc.h>
#include <plat/devs.h>
......@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
}
static struct resource exynos4_dwmci_resource[] = {
[0] = {
.start = EXYNOS4_PA_DWMCI,
.end = EXYNOS4_PA_DWMCI + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_DWMCI,
.end = IRQ_DWMCI,
.flags = IORESOURCE_IRQ,
}
[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
};
static struct dw_mci_board exynos4_dwci_pdata = {
......
arch/arm/mach-exynos/mach-nuri.c
浏览文件 @ dc2af52c
......@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_ERASE),
.host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
......
arch/arm/mach-exynos/mach-universal_c210.c
浏览文件 @ dc2af52c
......@@ -40,6 +40,7 @@
#include <plat/pd.h>
#include <plat/regs-fb-v4.h>
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
#include <plat/mipi_csis.h>
......@@ -747,6 +748,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
.host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
......@@ -1062,6 +1064,7 @@ static void __init universal_map_io(void)
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
static void s5p_tv_setup(void)
......@@ -1112,7 +1115,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
.timer = &s5p_timer,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
arch/arm/mach-imx/imx27-dt.c
浏览文件 @ dc2af52c
......@@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
static int __init imx27_avic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
......@@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base -= 32;
irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
NULL);
return 0;
}
......
arch/arm/mach-imx/mm-imx5.c
浏览文件 @ dc2af52c
......@@ -35,7 +35,7 @@ static void imx5_idle(void)
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake() != 0)
if (!tzic_enable_wake())
cpu_do_idle();
clk_disable(gpc_dvfs_clk);
}
......
arch/arm/mach-kirkwood/board-dt.c
浏览文件 @ dc2af52c
......@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
......
arch/arm/mach-msm/board-msm8x60.c
浏览文件 @ dc2af52c
......@@ -17,6 +17,7 @@
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/memblock.h>
......@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
msm_map_msm8x60_io();
}
#ifdef CONFIG_OF
static struct of_device_id msm_dt_gic_match[] __initdata = {
{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
{}
};
#endif
static void __init msm8x60_init_irq(void)
{
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
if (!of_have_populated_dt())
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
#ifdef CONFIG_OF
else
of_irq_init(msm_dt_gic_match);
#endif
/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
......@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
{}
};
static struct of_device_id msm_dt_gic_match[] __initdata = {
{ .compatible = "qcom,msm-8660-qgic", },
{}
};
static void __init msm8x60_dt_init(void)
{
irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
GIC_SPI_START);
if (of_machine_is_compatible("qcom,msm8660-surf")) {
printk(KERN_INFO "Init surf UART registers\n");
msm8x60_init_uart12dm();
......
arch/arm/mach-omap1/ams-delta-fiq.c
浏览文件 @ dc2af52c
......@@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
struct irq_chip *irq_chip = NULL;
int gpio, irq_num, fiq_count;
irq_desc = irq_to_desc(IH_GPIO_BASE);
irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
if (irq_desc)
irq_chip = irq_desc->irq_data.chip;
......
arch/arm/mach-omap1/mux.c
浏览文件 @ dc2af52c
......@@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <plat/mux.h>
......
arch/arm/mach-omap1/timer.c
浏览文件 @ dc2af52c
......@@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
int n = (pdev->id - 1) << 1;
u32 l;
l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
__raw_writel(l, MOD_CONF_CTRL_1);
omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}
......
arch/arm/mach-omap2/board-4430sdp.c
浏览文件 @ dc2af52c
......@@ -20,6 +20,7 @@
#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
......@@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
......@@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_vibra_data twl6040_vibra = {
static struct twl6040_vibra_data twl6040_vibra = {
.vibldrv_res = 8,
.vibrdrv_res = 3,
.viblmotor_res = 10,
......@@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
.vddvibr_uV = 0, /* fixed volt supply - VBAT */
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
.audio = &twl6040_audio,
/* Regulators */
.vusim = &sdp4430_vusim,
.vaux1 = &sdp4430_vaux1,
......@@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
......
arch/arm/mach-omap2/board-generic.c
浏览文件 @ dc2af52c
......@@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
static void __init omap4_i2c_init(void)
{
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
}
static void __init omap4_init(void)
......
arch/arm/mach-omap2/board-igep0020.c
浏览文件 @ dc2af52c
......@@ -641,7 +641,7 @@ static struct regulator_consumer_supply dummy_supplies[] = {
static void __init igep_init(void)
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Get IGEP2 hardware revision */
......
arch/arm/mach-omap2/board-omap4panda.c
浏览文件 @ dc2af52c
......@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
......@@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
......@@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata = {
.audio = &twl6040_audio,
};
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
......@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
......
arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
浏览文件 @ dc2af52c
......@@ -941,10 +941,10 @@
#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
#define OMAP4_DSI1_LANEENABLE_SHIFT 24
#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
#define OMAP4_DSI2_PIPD_SHIFT 19
#define OMAP4_DSI2_PIPD_MASK (0x1f << 19)
#define OMAP4_DSI1_PIPD_SHIFT 14
#define OMAP4_DSI1_PIPD_MASK (0x1f << 14)
#define OMAP4_DSI1_PIPD_SHIFT 19
#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
#define OMAP4_DSI2_PIPD_SHIFT 14
#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
/* CONTROL_MCBSPLP */
#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
......
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ dc2af52c
......@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
......@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
if (!oh)
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
return _ocp_softreset(oh);
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**
......
arch/arm/mach-omap2/omap_hwmod_2420_data.c
浏览文件 @ dc2af52c
......@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
......
arch/arm/mach-omap2/omap_hwmod_2430_data.c
浏览文件 @ dc2af52c
......@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
......
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
浏览文件 @ dc2af52c
......@@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
......
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
浏览文件 @ dc2af52c
......@@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
/*
* ISS needs 100 OCP clk cycles delay after a softreset before
* accessing sysconfig again.
* The lowest frequency at the moment for L3 bus is 100 MHz, so
* 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
*
* TODO: Indicate errata when available.
*/
.srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
......
arch/arm/mach-omap2/serial.c
浏览文件 @ dc2af52c
......@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
}
#else
......@@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static struct omap_device_pad default_uart1_pads[] __initdata = {
{
.name = "uart1_cts.uart1_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart1_rts.uart1_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_tx.uart1_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_rx.uart1_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart2_pads[] __initdata = {
{
.name = "uart2_cts.uart2_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart2_rts.uart2_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_tx.uart2_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_rx.uart2_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart3_pads[] __initdata = {
{
.name = "uart3_cts_rctx.uart3_cts_rctx",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart3_rts_sd.uart3_rts_sd",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_tx_irtx.uart3_tx_irtx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
{
.name = "gpmc_wait2.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "gpmc_wait3.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
},
};
static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
{
.name = "uart4_tx.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart4_rx.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
switch (bdata->id) {
case 0:
bdata->pads = default_uart1_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
break;
case 1:
bdata->pads = default_uart2_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
break;
case 2:
bdata->pads = default_uart3_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
break;
case 3:
if (cpu_is_omap44xx()) {
bdata->pads = default_omap4_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap4_uart4_pads);
} else if (cpu_is_omap3630()) {
bdata->pads = default_omap36xx_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap36xx_uart4_pads);
}
break;
default:
break;
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
......
arch/arm/mach-omap2/twl-common.c
浏览文件 @ dc2af52c
......@@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
.flags = I2C_CLIENT_WAKE,
};
static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
{
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
},
{
I2C_BOARD_INFO("twl6040", 0x4b),
},
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
......@@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
void __init omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
omap4_i2c1_board_info[0].platform_data = pmic_data;
/* TWL6040 audio IC part */
omap4_i2c1_board_info[1].irq = twl6040_irq;
omap4_i2c1_board_info[1].platform_data = twl6040_data;
omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
}
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
if (!pmic_i2c_board_info.irq)
return;
omap3_twl_init();
omap4_twl_init();
if (pmic_i2c_board_info.irq)
omap3_twl_init();
if (omap4_i2c1_board_info[0].irq)
omap4_twl_init();
}
#if defined(CONFIG_ARCH_OMAP3)
......
arch/arm/mach-omap2/twl-common.h
浏览文件 @ dc2af52c
......@@ -29,6 +29,7 @@
struct twl4030_platform_data;
struct twl6040_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
......@@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *audio_data, int twl6040_irq);
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
......
arch/arm/mach-orion5x/mpp.h
浏览文件 @ dc2af52c
......@@ -65,8 +65,8 @@
#define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1)
#define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1)
#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1)
#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1)
#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1, 1, 1)
#define MPP9_GIGE MPP(9, 0x1, 0, 0, 1, 1, 1)
#define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1)
#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1)
......
arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
浏览文件 @ dc2af52c
......@@ -17,6 +17,7 @@
*
* bit 23 - Input/Output (PXA2xx specific)
* bit 24 - Wakeup Enable(PXA2xx specific)
* bit 25 - Keep Output (PXA2xx specific)
*/
#define MFP_DIR_IN (0x0 << 23)
......@@ -25,6 +26,12 @@
#define MFP_DIR(x) (((x) >> 23) & 0x1)
#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
/*
* MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
* retain their last output level (low or high).
* Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
*/
#define MFP_LPM_KEEP_OUTPUT (0x1 << 25)
#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
......
arch/arm/mach-pxa/mfp-pxa2xx.c
浏览文件 @ dc2af52c
......@@ -33,6 +33,8 @@
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
#define PWER_WE35 (1 << 24)
......@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
static unsigned long saved_gplr[4];
static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(void)
......@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
}
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
saved_gplr[i] = GPLR(i * 32);
saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
GPSR(i * 32) = PGSR(i);
GPCR(i * 32) = ~PGSR(i);
}
/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
for (i = 0; i < pxa_last_gpio; i++) {
if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
(saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
GPDR(i) |= GPIO_bit(i);
else
GPDR(i) &= ~GPIO_bit(i);
}
return 0;
}
......@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPSR(i * 32) = saved_gplr[i];
GPCR(i * 32) = ~saved_gplr[i];
GPDR(i * 32) = saved_gpdr[i];
PGSR(i) = saved_pgsr[i];
}
......
arch/arm/mach-pxa/pxa27x.c
浏览文件 @ dc2af52c
......@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
pxa_register_device(&pxa27x_device_i2c_power, info);
}
static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
.gpio_set_wake = gpio_set_wake,
};
static struct platform_device *devices[] __initdata = {
&pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
......@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
......
arch/arm/mach-s3c24xx/Kconfig
浏览文件 @ dc2af52c
......@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
help
Compile in platform device definition for Samsung TouchScreen.
# cpu-specific sections
if CPU_S3C2410
config S3C2410_DMA
bool
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
......@@ -127,6 +123,10 @@ config S3C2410_PM
help
Power Management code common to S3C2410 and better
# cpu-specific sections
if CPU_S3C2410
config S3C24XX_SIMTEC_NOR
bool
help
......
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ dc2af52c
......@@ -25,6 +25,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/interrupt.h>
#include <asm/hardware/vic.h>
......@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
/* MoviNAND */
static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
.max_width = 4,
.host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
......
arch/arm/mach-sa1100/generic.c
浏览文件 @ dc2af52c
......@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
}
static struct resource sa1100_rtc_resources[] = {
DEFINE_RES_MEM(0x90010000, 0x9001003f),
DEFINE_RES_MEM(0x90010000, 0x40),
DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
};
......
arch/arm/mach-shmobile/board-ag5evm.c
浏览文件 @ dc2af52c
......@@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = {
};
/* SDHI0 */
static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
{
struct device *dev = arg;
struct sh_mobile_sdhi_info *info = dev->platform_data;
struct tmio_mmc_data *pdata = info->pdata;
tmio_mmc_cd_wakeup(pdata);
return IRQ_HANDLED;
}
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = GPIO_PORT251,
};
static struct resource sdhi0_resources[] = {
......@@ -557,7 +547,6 @@ static void __init ag5evm_init(void)
lcd_backlight_reset();
/* enable SDHI0 on CN15 [SD I/F] */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
......@@ -566,13 +555,6 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhi0 cd", &sdhi0_device.dev))
sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
else
pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
......
arch/arm/mach-shmobile/board-mackerel.c
浏览文件 @ dc2af52c
......@@ -1038,21 +1038,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
}
/* SDHI0 */
static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
{
struct device *dev = arg;
struct sh_mobile_sdhi_info *info = dev->platform_data;
struct tmio_mmc_data *pdata = info->pdata;
tmio_mmc_cd_wakeup(pdata);
return IRQ_HANDLED;
}
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.cd_gpio = GPIO_PORT172,
};
static struct resource sdhi0_resources[] = {
......@@ -1411,7 +1402,6 @@ static void __init mackerel_init(void)
{
u32 srcr4;
struct clk *clk;
int ret;
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
......@@ -1508,7 +1498,6 @@ static void __init mackerel_init(void)
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
/* enable SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
......@@ -1517,13 +1506,6 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
if (!ret)
sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
else
pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
......
arch/arm/mach-shmobile/headsmp.S
浏览文件 @ dc2af52c
......@@ -16,6 +16,59 @@
__CPUINIT
/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
*
* The secondary kernel init calls v7_flush_dcache_all before it enables
* the L1; however, the L1 comes out of reset in an undefined state, so
* the clean + invalidate performed by v7_flush_dcache_all causes a bunch
* of cache lines with uninitialized data and uninitialized tags to get
* written out to memory, which does really unpleasant things to the main
* processor. We fix this by performing an invalidate, rather than a
* clean + invalidate, before jumping into the kernel.
*
* This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
* to be called for both secondary cores startup and primary core resume
* procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(v7_invalidate_l1)
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(shmobile_invalidate_start)
/*
* Reset vector for secondary CPUs.
* This will be mapped at address 0 by SBAR register.
......@@ -24,4 +77,5 @@
.align 12
ENTRY(shmobile_secondary_vector)
ldr pc, 1f
1: .long secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
ENDPROC(shmobile_secondary_vector)
arch/arm/mach-shmobile/include/mach/common.h
浏览文件 @ dc2af52c
......@@ -4,7 +4,6 @@
extern void shmobile_earlytimer_init(void);
extern struct sys_timer shmobile_timer;
struct twd_local_timer;
void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
extern int shmobile_platform_cpu_kill(unsigned int cpu);
......@@ -82,5 +81,6 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu);
extern void r8a7779_secondary_init(unsigned int cpu);
extern int r8a7779_boot_secondary(unsigned int cpu);
extern void r8a7779_smp_prepare_cpus(void);
extern void r8a7779_register_twd(void);
#endif /* __ARCH_MACH_COMMON_H */
arch/arm/mach-shmobile/setup-r8a7779.c
浏览文件 @ dc2af52c
......@@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void)
ARRAY_SIZE(r8a7779_late_devices));
}
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
static void __init r8a7779_earlytimer_init(void)
{
r8a7779_clock_init();
shmobile_earlytimer_init();
r8a7779_register_twd();
}
void __init r8a7779_add_early_devices(void)
......
arch/arm/mach-shmobile/setup-sh73a0.c
浏览文件 @ dc2af52c
......@@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void)
ARRAY_SIZE(sh73a0_late_devices));
}
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak sh73a0_register_twd(void) { }
static void __init sh73a0_earlytimer_init(void)
{
sh73a0_clock_init();
shmobile_earlytimer_init();
sh73a0_register_twd();
}
void __init sh73a0_add_early_devices(void)
......
arch/arm/mach-shmobile/smp-r8a7779.c
浏览文件 @ dc2af52c
......@@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(scu_lock);
static unsigned long tmp;
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
void __init r8a7779_register_twd(void)
{
twd_local_timer_register(&twd_local_timer);
}
#endif
static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
{
void __iomem *scu_base = scu_base_addr();
......@@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
shmobile_twd_init(&twd_local_timer);
return scu_get_core_count(scu_base);
}
......
arch/arm/mach-shmobile/smp-sh73a0.c
浏览文件 @ dc2af52c
......@@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(scu_lock);
static unsigned long tmp;
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
void __init sh73a0_register_twd(void)
{
twd_local_timer_register(&twd_local_timer);
}
#endif
static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
{
......@@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
shmobile_twd_init(&twd_local_timer);
return scu_get_core_count(scu_base);
}
......
arch/arm/mach-shmobile/timer.c
浏览文件 @ dc2af52c
......@@ -46,15 +46,6 @@ static void __init shmobile_timer_init(void)
{
}
void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
{
#ifdef CONFIG_HAVE_ARM_TWD
int err = twd_local_timer_register(twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
#endif
}
struct sys_timer shmobile_timer = {
.init = shmobile_timer_init,
};
arch/arm/mach-u300/core.c
浏览文件 @ dc2af52c
......@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
mask[1], mask[1]);
}
......
arch/arm/mach-u300/i2c.c
浏览文件 @ dc2af52c
......@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
......@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
.min_uV = 2500000,
.max_uV = 2500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
......@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
......
arch/arm/mach-u300/include/mach/irqs.h
浏览文件 @ dc2af52c
......@@ -12,101 +12,101 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define IRQ_U300_INTCON0_START 0
#define IRQ_U300_INTCON1_START 32
#define IRQ_U300_INTCON0_START 1
#define IRQ_U300_INTCON1_START 33
/* These are on INTCON0 - 30 lines */
#define IRQ_U300_IRQ0_EXT 0
#define IRQ_U300_IRQ1_EXT 1
#define IRQ_U300_DMA 2
#define IRQ_U300_VIDEO_ENC_0 3
#define IRQ_U300_VIDEO_ENC_1 4
#define IRQ_U300_AAIF_RX 5
#define IRQ_U300_AAIF_TX 6
#define IRQ_U300_AAIF_VGPIO 7
#define IRQ_U300_AAIF_WAKEUP 8
#define IRQ_U300_PCM_I2S0_FRAME 9
#define IRQ_U300_PCM_I2S0_FIFO 10
#define IRQ_U300_PCM_I2S1_FRAME 11
#define IRQ_U300_PCM_I2S1_FIFO 12
#define IRQ_U300_XGAM_GAMCON 13
#define IRQ_U300_XGAM_CDI 14
#define IRQ_U300_XGAM_CDICON 15
#define IRQ_U300_IRQ0_EXT 1
#define IRQ_U300_IRQ1_EXT 2
#define IRQ_U300_DMA 3
#define IRQ_U300_VIDEO_ENC_0 4
#define IRQ_U300_VIDEO_ENC_1 5
#define IRQ_U300_AAIF_RX 6
#define IRQ_U300_AAIF_TX 7
#define IRQ_U300_AAIF_VGPIO 8
#define IRQ_U300_AAIF_WAKEUP 9
#define IRQ_U300_PCM_I2S0_FRAME 10
#define IRQ_U300_PCM_I2S0_FIFO 11
#define IRQ_U300_PCM_I2S1_FRAME 12
#define IRQ_U300_PCM_I2S1_FIFO 13
#define IRQ_U300_XGAM_GAMCON 14
#define IRQ_U300_XGAM_CDI 15
#define IRQ_U300_XGAM_CDICON 16
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
/* MMIACC not used on the DB3210 or DB3350 chips */
#define IRQ_U300_XGAM_MMIACC 16
#define IRQ_U300_XGAM_MMIACC 17
#endif
#define IRQ_U300_XGAM_PDI 17
#define IRQ_U300_XGAM_PDICON 18
#define IRQ_U300_XGAM_GAMEACC 19
#define IRQ_U300_XGAM_MCIDCT 20
#define IRQ_U300_APEX 21
#define IRQ_U300_UART0 22
#define IRQ_U300_SPI 23
#define IRQ_U300_TIMER_APP_OS 24
#define IRQ_U300_TIMER_APP_DD 25
#define IRQ_U300_TIMER_APP_GP1 26
#define IRQ_U300_TIMER_APP_GP2 27
#define IRQ_U300_TIMER_OS 28
#define IRQ_U300_TIMER_MS 29
#define IRQ_U300_KEYPAD_KEYBF 30
#define IRQ_U300_KEYPAD_KEYBR 31
#define IRQ_U300_XGAM_PDI 18
#define IRQ_U300_XGAM_PDICON 19
#define IRQ_U300_XGAM_GAMEACC 20
#define IRQ_U300_XGAM_MCIDCT 21
#define IRQ_U300_APEX 22
#define IRQ_U300_UART0 23
#define IRQ_U300_SPI 24
#define IRQ_U300_TIMER_APP_OS 25
#define IRQ_U300_TIMER_APP_DD 26
#define IRQ_U300_TIMER_APP_GP1 27
#define IRQ_U300_TIMER_APP_GP2 28
#define IRQ_U300_TIMER_OS 29
#define IRQ_U300_TIMER_MS 30
#define IRQ_U300_KEYPAD_KEYBF 31
#define IRQ_U300_KEYPAD_KEYBR 32
/* These are on INTCON1 - 32 lines */
#define IRQ_U300_GPIO_PORT0 32
#define IRQ_U300_GPIO_PORT1 33
#define IRQ_U300_GPIO_PORT2 34
#define IRQ_U300_GPIO_PORT0 33
#define IRQ_U300_GPIO_PORT1 34
#define IRQ_U300_GPIO_PORT2 35
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
defined(CONFIG_MACH_U300_BS335)
/* These are for DB3150, DB3200 and DB3350 */
#define IRQ_U300_WDOG 35
#define IRQ_U300_EVHIST 36
#define IRQ_U300_MSPRO 37
#define IRQ_U300_MMCSD_MCIINTR0 38
#define IRQ_U300_MMCSD_MCIINTR1 39
#define IRQ_U300_I2C0 40
#define IRQ_U300_I2C1 41
#define IRQ_U300_RTC 42
#define IRQ_U300_NFIF 43
#define IRQ_U300_NFIF2 44
#define IRQ_U300_WDOG 36
#define IRQ_U300_EVHIST 37
#define IRQ_U300_MSPRO 38
#define IRQ_U300_MMCSD_MCIINTR0 39
#define IRQ_U300_MMCSD_MCIINTR1 40
#define IRQ_U300_I2C0 41
#define IRQ_U300_I2C1 42
#define IRQ_U300_RTC 43
#define IRQ_U300_NFIF 44
#define IRQ_U300_NFIF2 45
#endif
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
#define U300_VIC_IRQS_END 45
#define U300_VIC_IRQS_END 46
#endif
/* The DB3350-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS335
#define IRQ_U300_ISP_F0 45
#define IRQ_U300_ISP_F1 46
#define IRQ_U300_ISP_F2 47
#define IRQ_U300_ISP_F3 48
#define IRQ_U300_ISP_F4 49
#define IRQ_U300_GPIO_PORT3 50
#define IRQ_U300_SYSCON_PLL_LOCK 51
#define IRQ_U300_UART1 52
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
#define U300_VIC_IRQS_END 56
#define IRQ_U300_ISP_F0 46
#define IRQ_U300_ISP_F1 47
#define IRQ_U300_ISP_F2 48
#define IRQ_U300_ISP_F3 49
#define IRQ_U300_ISP_F4 50
#define IRQ_U300_GPIO_PORT3 51
#define IRQ_U300_SYSCON_PLL_LOCK 52
#define IRQ_U300_UART1 53
#define IRQ_U300_GPIO_PORT4 54
#define IRQ_U300_GPIO_PORT5 55
#define IRQ_U300_GPIO_PORT6 56
#define U300_VIC_IRQS_END 57
#endif
/* The DB3210-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS365
#define IRQ_U300_GPIO_PORT3 35
#define IRQ_U300_GPIO_PORT4 36
#define IRQ_U300_WDOG 37
#define IRQ_U300_EVHIST 38
#define IRQ_U300_MSPRO 39
#define IRQ_U300_MMCSD_MCIINTR0 40
#define IRQ_U300_MMCSD_MCIINTR1 41
#define IRQ_U300_I2C0 42
#define IRQ_U300_I2C1 43
#define IRQ_U300_RTC 44
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
#define U300_VIC_IRQS_END 48
#define IRQ_U300_GPIO_PORT3 36
#define IRQ_U300_GPIO_PORT4 37
#define IRQ_U300_WDOG 38
#define IRQ_U300_EVHIST 39
#define IRQ_U300_MSPRO 40
#define IRQ_U300_MMCSD_MCIINTR0 41
#define IRQ_U300_MMCSD_MCIINTR1 42
#define IRQ_U300_I2C0 43
#define IRQ_U300_I2C1 44
#define IRQ_U300_RTC 45
#define IRQ_U300_NFIF 46
#define IRQ_U300_NFIF2 47
#define IRQ_U300_SYSCON_PLL_LOCK 48
#define U300_VIC_IRQS_END 49
#endif
/* Maximum 8*7 GPIO lines */
......@@ -117,6 +117,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
#define NR_IRQS (IRQ_U300_GPIO_END)
#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
#endif
arch/arm/mach-ux500/Kconfig
浏览文件 @ dc2af52c
......@@ -17,6 +17,7 @@ config UX500_SOC_DB5500
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ
......
arch/arm/mach-ux500/mbox-db5500.c
浏览文件 @ dc2af52c
......@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
return sprintf(buf, "0x%X\n", mbox_value);
}
static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
static int mbox_show(struct seq_file *s, void *data)
{
......
arch/arm/mach-ux500/platsmp.c
浏览文件 @ dc2af52c
......@@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
smp_send_reschedule(cpu);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
......
arch/arm/mm/abort-ev6.S
浏览文件 @ dc2af52c
......@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
/*
* Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
* The test below covers all the write situations, including Java bytecodes
* Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
*/
bic r1, r1, #1 << 11 @ clear bit 11 of FSR
#ifdef CONFIG_ARM_ERRATA_326103
ldr ip, =0x4107b36
mrc p15, 0, r3, c0, c0, 0 @ get processor id
teq ip, r3, lsr #4 @ r0 ARM1136?
bne do_DataAbort
tst r5, #PSR_J_BIT @ Java?
tsteq r5, #PSR_T_BIT @ Thumb?
bne do_DataAbort
do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
ldreq r3, [r4] @ read aborted ARM instruction
bic r1, r1, #1 << 11 @ clear bit 11 of FSR
ldr r3, [r4] @ read aborted ARM instruction
#ifdef CONFIG_CPU_ENDIAN_BE8
reveq r3, r3
rev r3, r3
#endif
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
#endif
b do_DataAbort
arch/arm/mm/cache-l2x0.c
浏览文件 @ dc2af52c
......@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
static DEFINE_RAW_SPINLOCK(l2x0_lock);
static u32 l2x0_way_mask; /* Bitmask of active ways */
static u32 l2x0_size;
static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
struct l2x0_regs l2x0_saved_regs;
......@@ -61,12 +62,7 @@ static inline void cache_sync(void)
{
void __iomem *base = l2x0_base;
#ifdef CONFIG_PL310_ERRATA_753970
/* write to an unmmapped register */
writel_relaxed(0, base + L2X0_DUMMY_REG);
#else
writel_relaxed(0, base + L2X0_CACHE_SYNC);
#endif
writel_relaxed(0, base + sync_reg_offset);
cache_wait(base + L2X0_CACHE_SYNC, 1);
}
......@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
}
#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
static inline void debug_writel(unsigned long val)
{
if (outer_cache.set_debug)
outer_cache.set_debug(val);
}
#define debug_writel(val) outer_cache.set_debug(val)
static void l2x0_set_debug(unsigned long val)
static void pl310_set_debug(unsigned long val)
{
writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
}
......@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
{
}
#define l2x0_set_debug NULL
#define pl310_set_debug NULL
#endif
#ifdef CONFIG_PL310_ERRATA_588369
......@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
else
ways = 8;
type = "L310";
#ifdef CONFIG_PL310_ERRATA_753970
/* Unmapped register. */
sync_reg_offset = L2X0_DUMMY_REG;
#endif
outer_cache.set_debug = pl310_set_debug;
break;
case L2X0_CACHE_ID_PART_L210:
ways = (aux >> 13) & 0xf;
......@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
outer_cache.flush_all = l2x0_flush_all;
outer_cache.inv_all = l2x0_inv_all;
outer_cache.disable = l2x0_disable;
outer_cache.set_debug = l2x0_set_debug;
printk(KERN_INFO "%s cache controller enabled\n", type);
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
......
arch/arm/mm/init.c
浏览文件 @ dc2af52c
......@@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid);
#endif
#ifndef CONFIG_SPARSEMEM
static void arm_memory_present(void)
static void __init arm_memory_present(void)
{
}
#else
static void arm_memory_present(void)
static void __init arm_memory_present(void)
{
struct memblock_region *reg;
......
arch/arm/mm/mmu.c
浏览文件 @ dc2af52c
......@@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
}
}
static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
unsigned long phys, const struct mem_type *type)
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
unsigned long end, unsigned long phys, const struct mem_type *type)
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
......
arch/arm/plat-omap/dma.c
浏览文件 @ dc2af52c
......@@ -916,6 +916,13 @@ void omap_start_dma(int lch)
l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
l |= OMAP_DMA_CCR_EN;
/*
* As dma_write() uses IO accessors which are weakly ordered, there
* is no guarantee that data in coherent DMA memory will be visible
* to the DMA device. Add a memory barrier here to ensure that any
* such data is visible prior to enabling DMA.
*/
mb();
p->dma_write(l, CCR, lch);
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
......@@ -965,6 +972,13 @@ void omap_stop_dma(int lch)
p->dma_write(l, CCR, lch);
}
/*
* Ensure that data transferred by DMA is visible to any access
* after DMA has been disabled. This is important for coherent
* DMA regions.
*/
mb();
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[dma_lch_count];
......
arch/arm/plat-omap/include/plat/omap_hwmod.h
浏览文件 @ dc2af52c
......@@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
......@@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
/**
......
arch/arm/plat-omap/sram.c
浏览文件 @ dc2af52c
......@@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
......@@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
#endif /* CONFIG_PM */
#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
#endif
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{
......
arch/arm/plat-samsung/include/plat/sdhci.h
浏览文件 @ dc2af52c
......@@ -18,6 +18,8 @@
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
#include <plat/devs.h>
struct platform_device;
struct mmc_host;
struct mmc_card;
......@@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { }
#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
static inline void s3c_sdhci_setname(int id, char *name)
{
switch (id) {
#ifdef CONFIG_S3C_DEV_HSMMC
case 0:
s3c_device_hsmmc0.name = name;
break;
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
case 1:
s3c_device_hsmmc1.name = name;
break;
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
case 2:
s3c_device_hsmmc2.name = name;
break;
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
case 3:
s3c_device_hsmmc3.name = name;
break;
#endif
}
}
#endif /* __PLAT_S3C_SDHCI_H */
arch/arm/vfp/vfpmodule.c
浏览文件 @ dc2af52c
......@@ -17,6 +17,8 @@
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/uaccess.h>
#include <linux/user.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
......@@ -528,6 +530,103 @@ void vfp_flush_hwstate(struct thread_info *thread)
put_cpu();
}
/*
* Save the current VFP state into the provided structures and prepare
* for entry into a new function (signal handler).
*/
int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
struct user_vfp_exc __user *ufp_exc)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
int err = 0;
/* Ensure that the saved hwstate is up-to-date. */
vfp_sync_hwstate(thread);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
sizeof(hwstate->fpregs));
/*
* Copy the status and control register.
*/
__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
/*
* Copy the exception registers.
*/
__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
if (err)
return -EFAULT;
/* Ensure that VFP is disabled. */
vfp_flush_hwstate(thread);
/*
* As per the PCS, clear the length and stride bits for function
* entry.
*/
hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
/*
* Disable VFP in the hwstate so that we can detect if it gets
* used.
*/
hwstate->fpexc &= ~FPEXC_EN;
return 0;
}
/* Sanitise and restore the current VFP state from the provided structures. */
int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
struct user_vfp_exc __user *ufp_exc)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
unsigned long fpexc;
int err = 0;
/*
* If VFP has been used, then disable it to avoid corrupting
* the new thread state.
*/
if (hwstate->fpexc & FPEXC_EN)
vfp_flush_hwstate(thread);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
sizeof(hwstate->fpregs));
/*
* Copy the status and control register.
*/
__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
/*
* Sanitise and restore the exception registers.
*/
__get_user_error(fpexc, &ufp_exc->fpexc, err);
/* Ensure the VFP is enabled. */
fpexc |= FPEXC_EN;
/* Ensure FPINST2 is invalid and the exception flag is cleared. */
fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
hwstate->fpexc = fpexc;
__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
return err ? -EFAULT : 0;
}
/*
* VFP hardware can lose all context when a CPU goes offline.
* As we will be running in SMP mode with CPU hotplug, we will save the
......
arch/blackfin/mach-bf538/boards/ezkit.c
浏览文件 @ dc2af52c
......@@ -38,7 +38,7 @@ static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#endif /* CONFIG_RTC_DRV_BFIN */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
......@@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_SERIAL_BFIN_UART0 */
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
......@@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_SERIAL_BFIN_UART1 */
#ifdef CONFIG_SERIAL_BFIN_UART2
static struct resource bfin_uart2_resources[] = {
{
......@@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = {
.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
},
};
#endif
#endif
#endif /* CONFIG_SERIAL_BFIN_UART2 */
#endif /* CONFIG_SERIAL_BFIN */
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
......@@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = {
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#endif /* CONFIG_BFIN_SIR0 */
#ifdef CONFIG_BFIN_SIR1
static struct resource bfin_sir1_resources[] = {
{
......@@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = {
.num_resources = ARRAY_SIZE(bfin_sir1_resources),
.resource = bfin_sir1_resources,
};
#endif
#endif /* CONFIG_BFIN_SIR1 */
#ifdef CONFIG_BFIN_SIR2
static struct resource bfin_sir2_resources[] = {
{
......@@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = {
.num_resources = ARRAY_SIZE(bfin_sir2_resources),
.resource = bfin_sir2_resources,
};
#endif
#endif
#endif /* CONFIG_BFIN_SIR2 */
#endif /* CONFIG_BFIN_SIR */
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
......@@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = {
.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
static struct resource bfin_sport1_uart_resources[] = {
{
......@@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = {
.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
static struct resource bfin_sport2_uart_resources[] = {
{
......@@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = {
.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */
#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
static struct resource bfin_sport3_uart_resources[] = {
{
......@@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = {
.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
},
};
#endif
#endif
#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */
#endif /* CONFIG_SERIAL_BFIN_SPORT */
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
static unsigned short bfin_can_peripherals[] = {
......@@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = {
.platform_data = &bfin_can_peripherals, /* Passed to driver */
},
};
#endif
#endif /* CONFIG_CAN_BFIN */
/*
* USB-LAN EzExtender board
......@@ -488,7 +488,7 @@ static struct platform_device smc91x_device = {
.platform_data = &smc91x_info,
},
};
#endif
#endif /* CONFIG_SMC91X */
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
......@@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = {
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
};
#endif
#endif /* CONFIG_MTD_M25P80 */
#endif /* CONFIG_SPI_BFIN5XX */
#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#include <linux/spi/ad7879.h>
......@@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.gpio_export = 1, /* Export GPIO to gpiolib */
.gpio_base = -1, /* Dynamic allocation */
};
#endif
#endif /* CONFIG_TOUCHSCREEN_AD7879 */
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#include <asm/bfin-lq035q1.h>
......@@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = {
.platform_data = &bfin_lq035q1_data,
},
};
#endif
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
static struct spi_board_info bf538_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
......@@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
},
#endif
#endif /* CONFIG_MTD_M25P80 */
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
{
.modalias = "ad7879",
......@@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.chip_select = 1,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
{
.modalias = "bfin-lq035q1-spi",
......@@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.chip_select = 2,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
{
.modalias = "spidev",
......@@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.bus_num = 0,
.chip_select = 1,
},
#endif
#endif /* CONFIG_SPI_SPIDEV */
};
/* SPI (0) */
......@@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = {
},
};
#endif /* spi master and devices */
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
[0] = {
......@@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = {
.num_resources = ARRAY_SIZE(bfin_twi1_resource),
.resource = bfin_twi1_resource,
};
#endif
#endif
#endif /* CONFIG_BF542 */
#endif /* CONFIG_I2C_BLACKFIN_TWI */
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>
......
arch/hexagon/kernel/dma.c
浏览文件 @ dc2af52c
......@@ -22,6 +22,7 @@
#include <linux/bootmem.h>
#include <linux/genalloc.h>
#include <asm/dma-mapping.h>
#include <linux/module.h>
struct dma_map_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
......
arch/hexagon/kernel/process.c
浏览文件 @ dc2af52c
/*
* Process creation support for Hexagon
*
* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
......@@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle;
void cpu_idle(void)
{
while (1) {
tick_nohz_stop_sched_tick(1);
tick_nohz_idle_enter();
local_irq_disable();
while (!need_resched()) {
idle_sleep();
......@@ -97,7 +97,7 @@ void cpu_idle(void)
local_irq_disable();
}
local_irq_enable();
tick_nohz_restart_sched_tick();
tick_nohz_idle_exit();
schedule();
}
}
......
arch/hexagon/kernel/ptrace.c
浏览文件 @ dc2af52c
......@@ -28,6 +28,7 @@
#include <linux/ptrace.h>
#include <linux/regset.h>
#include <linux/user.h>
#include <linux/elf.h>
#include <asm/user.h>
......
arch/hexagon/kernel/smp.c
浏览文件 @ dc2af52c
/*
* SMP support for Hexagon
*
* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
......@@ -28,6 +28,7 @@
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
#include <asm/time.h> /* timer_interrupt */
#include <asm/hexagon_vm.h>
......@@ -177,7 +178,12 @@ void __cpuinit start_secondary(void)
printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
notify_cpu_starting(cpu);
ipi_call_lock();
set_cpu_online(cpu, true);
ipi_call_unlock();
local_irq_enable();
cpu_idle();
......
arch/hexagon/kernel/time.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/hexagon/kernel/vdso.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/ia64/include/asm/futex.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/ia64/kernel/perfmon.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/ia64/kvm/kvm-ia64.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/520x/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/523x/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/5249/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/527x/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/528x/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/532x/config.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/68EZ328/Makefile
浏览文件 @ dc2af52c
此差异已折叠。
arch/m68k/platform/68VZ328/Makefile
浏览文件 @ dc2af52c
此差异已折叠。
arch/mips/ath79/dev-wmac.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/mips/include/asm/mmu_context.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/mips/kernel/signal.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/mips/kernel/signal32.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/mips/kernel/signal_n32.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/include/asm/hardware.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/include/asm/page.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/include/asm/pdc.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/include/asm/pgtable.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/include/asm/spinlock.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/kernel/pdc_cons.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/parisc/kernel/time.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi 0 → 100644
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/include/asm/irq.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/include/asm/mpic.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kernel/entry_64.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kernel/irq.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kernel/machine_kexec.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kernel/setup_32.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kernel/traps.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kvm/book3s_64_mmu_hv.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/kvm/book3s_hv.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/net/bpf_jit.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/net/bpf_jit_64.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/net/bpf_jit_comp.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/sysdev/cpm2_pic.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/sysdev/mpc8xx_pic.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/sysdev/mpic.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/sysdev/mpic_msgr.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/powerpc/sysdev/scom.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/defconfig
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/include/asm/facility.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/include/asm/pgalloc.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/include/asm/swab.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/include/asm/tlb.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/kernel/head.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/kernel/irq.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/kernel/perf_cpum_cf.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/mm/maccess.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/s390/mm/pgtable.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/sh/include/asm/atomic.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/sh/mm/fault_32.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/sparc/kernel/central.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/sparc/kernel/leon_smp.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/sparc/kernel/sys_sparc_64.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/sparc/mm/ultra.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/tile/include/asm/pci.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/tile/kernel/pci.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/tile/kernel/single_step.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/boot/compressed/head_32.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/boot/compressed/head_64.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/boot/compressed/relocs.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/boot/tools/build.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/ia32/ia32_aout.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/include/asm/posix_types.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/include/asm/sigcontext.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/include/asm/siginfo.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/include/asm/unistd.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/include/asm/x86_init.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/acpi/sleep.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/acpi/sleep.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/acpi/wakeup_32.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/acpi/wakeup_64.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/apic/apic.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/apic/x2apic_phys.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/cpu/amd.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/cpu/common.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/i387.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/kvm.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/microcode_amd.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/microcode_core.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/process_64.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/setup_percpu.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kernel/x86_init.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kvm/pmu.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kvm/vmx.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/kvm/x86.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/lib/insn.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/platform/geode/net5501.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/platform/mrst/mrst.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/xen/enlighten.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/xen/mmu.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/xen/smp.c
浏览文件 @ dc2af52c
此差异已折叠。
arch/x86/xen/xen-asm.S
浏览文件 @ dc2af52c
此差异已折叠。
arch/xtensa/include/asm/hardirq.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/xtensa/include/asm/io.h
浏览文件 @ dc2af52c
此差异已折叠。
arch/xtensa/kernel/signal.c
浏览文件 @ dc2af52c
此差异已折叠。
crypto/sha512_generic.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/acpica/hwxface.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/osl.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/power.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/reboot.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/scan.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/acpi/sleep.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/ahci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/ahci_platform.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/ata_piix.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/libata-core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/libata-eh.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/libata-scsi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/libata-transport.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/libata.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/pata_arasan_cf.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/ata/sata_mv.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/base/regmap/regmap.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/bcma/sprom.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/block/drbd/drbd_nl.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/block/virtio_blk.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/block/xen-blkback/xenbus.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/bluetooth/ath3k.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/bluetooth/btusb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/crypto/ixp4xx_crypto.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/crypto/talitos.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/amba-pl08x.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/at_hdmac.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/imx-dma.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/mxs-dma.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/pl330.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/ste_dma40.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/dma/ste_dma40_ll.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/firmware/efivars.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpio/gpio-omap.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpio/gpio-pch.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpio/gpio-pxa.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpio/gpio-samsung.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/drm_bufs.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/drm_crtc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/drm_fops.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/drm_usb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i810/i810_dma.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/i915_debugfs.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/i915_dma.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/i915_gem.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_crt.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_drv.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_fb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_hdmi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_panel.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/i915/intel_sdvo.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/nouveau/nv10_gpio.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/nouveau/nv50_sor.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/nouveau/nvc0_fb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/radeon/r600.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/radeon/rv770.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/gpu/drm/radeon/si.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hid/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hid/hid-tivo.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hsi/clients/hsi_char.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hsi/hsi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hwmon/ad7314.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hwmon/ads1015.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hwmon/coretemp.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/hwmon/fam15h_power.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/i2c/busses/i2c-eg20t.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/i2c/busses/i2c-mxs.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/i2c/busses/i2c-pnx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/i2c/busses/i2c-tegra.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/infiniband/core/mad.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/infiniband/hw/mlx4/main.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/input/misc/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/input/misc/twl6040-vibra.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/input/mouse/synaptics.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/leds/leds-atmel-pwm.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/leds/leds-netxbig.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/leds/leds-ns2.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/bitmap.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/bitmap.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/dm-mpath.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/dm-raid.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/dm-thin.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/md/md.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/media/rc/winbond-cir.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/media/video/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/media/video/mt9m032.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mfd/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mfd/asic3.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mfd/omap-usb-host.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mfd/rc5t583.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mfd/twl6040-core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/card/block.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/card/queue.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/core/bus.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/core/cd-gpio.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/core/core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/host/dw_mmc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/host/mxs-mmc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/host/omap_hsmmc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/host/sdhci-esdhc-imx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/mmc/host/sdhci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/arcnet/arc-rimi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/bonding/bond_3ad.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/bonding/bond_3ad.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/bonding/bond_main.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/caif/caif_hsi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/dummy.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/broadcom/tg3.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/dlink/dl2k.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/dlink/dl2k.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/marvell/sky2.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/marvell/sky2.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/sfc/efx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/sun/sungem.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ethernet/ti/tlan.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/hyperv/netvsc_drv.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/macvlan.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/macvtap.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/phy/icplus.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/ppp/ppp_generic.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/asix.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/cdc_ether.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/qmi_wwan.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/smsc75xx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/smsc95xx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/usb/usbnet.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/virtio_net.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wan/farsync.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/ath/ath9k/hw.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/ath/ath9k/hw.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/b43/main.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/libertas/cfg.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/mwifiex/pcie.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/rtlwifi/pci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/wl1251/main.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/net/wireless/wl1251/sdio.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/parisc/sba_iommu.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/pci/Makefile
浏览文件 @ dc2af52c
此差异已折叠。
drivers/pci/pci-acpi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/pci/pci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/pinctrl/core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/platform/x86/acerhdf.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/platform/x86/dell-laptop.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/platform/x86/intel_ips.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/regulator/core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/regulator/max8997.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/rtc/rtc-ds1307.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/rtc/rtc-mpc5121.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/s390/block/dasd_eckd.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/s390/char/vmur.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/s390/net/qeth_core_main.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/hosts.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/ipr.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libfc/fc_lport.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_ata.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_discover.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_event.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_expander.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_init.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_internal.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_phy.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/libsas/sas_port.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_bsg.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_dbg.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_isr.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_nx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_os.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_sup.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/qla2xxx/qla_version.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/scsi/virtio_scsi.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/Makefile
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/spi-bcm63xx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/spi-bfin-sport.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/spi-bfin5xx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/spi-ep93xx.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/spi/spi-pl022.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/staging/octeon/ethernet.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/staging/ozwpan/ozpd.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/staging/zcache/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/target/target_core_tpg.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/tty/amiserial.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/tty/serial/clps711x.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/tty/serial/pch_uart.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/tty/serial/pmac_zilog.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/tty/vt/keyboard.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/class/cdc-wdm.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/core/hcd-pci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/core/hub.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/core/message.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/dwc3/core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/dwc3/ep0.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/at91_udc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/dummy_hcd.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/f_fs.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/f_mass_storage.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/f_rndis.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/file_storage.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/fsl_udc_core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/g_ffs.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/s3c-hsotg.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/udc-core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/uvc.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/uvc_queue.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/gadget/uvc_v4l2.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ehci-fsl.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ehci-hcd.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ehci-omap.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ehci-pci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ehci-tegra.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/host/ohci-at91.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/misc/usbtest.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/misc/yurex.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/musb/davinci.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/musb/musb_core.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/musb/musb_core.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/musb/musb_host.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/musb/omap2430.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/otg/gpio_vbus.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/serial/cp210x.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/usb/serial/sierra.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/uwb/hwa-rc.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/uwb/neh.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/vhost/net.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/vhost/test.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/vhost/vhost.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/vhost/vhost.h
浏览文件 @ dc2af52c
此差异已折叠。
drivers/video/bfin-lq035q1-fb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/video/console/sticore.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/video/uvesafb.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/video/xen-fbfront.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/virtio/virtio_balloon.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/watchdog/hpwdt.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/events.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/gntdev.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/grant-table.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/manage.c
浏览文件 @ dc2af52c
此差异已折叠。
drivers/xen/xen-acpi-processor.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/aio.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/autofs4/autofs_i.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/autofs4/dev-ioctl.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/autofs4/inode.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/autofs4/waitq.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/binfmt_aout.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/binfmt_elf.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/binfmt_elf_fdpic.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/binfmt_flat.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/binfmt_som.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/backref.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/ctree.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/ctree.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/disk-io.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/disk-io.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/extent_io.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/file.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/inode.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/ioctl.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/ioctl.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/reada.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/relocation.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/scrub.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/super.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/transaction.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/tree-log.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/btrfs/volumes.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/buffer.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/cifsfs.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/cifsfs.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/cifssmb.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/connect.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/dir.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/cifs/file.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/dcache.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/dlm/lock.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/eventpoll.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/ext4/ext4.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/ext4/extents.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/ext4/super.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/fuse/dir.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/fuse/file.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/fuse/inode.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/gfs2/lock_dlm.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/hfsplus/catalog.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/hfsplus/dir.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/hugetlbfs/inode.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/jbd2/commit.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/lockd/clnt4xdr.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/lockd/clntxdr.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/namei.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/blocklayout/blocklayout.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/client.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/dir.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/idmap.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/internal.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/namespace.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4_fs.h
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4filelayoutdev.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4namespace.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4state.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/nfs4xdr.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/objlayout/objlayout.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/pnfs.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/read.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/super.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfs/write.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/nfs3xdr.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/nfs4proc.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/nfs4recover.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/nfs4state.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/nfs4xdr.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/nfsd/vfs.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/ocfs2/alloc.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/ocfs2/refcounttree.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/ocfs2/suballoc.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/pipe.c
浏览文件 @ dc2af52c
此差异已折叠。
fs/proc/task_mmu.c
浏览文件 @ dc2af52c
此差异已折叠。
include/acpi/actypes.h
浏览文件 @ dc2af52c
此差异已折叠。
include/asm-generic/siginfo.h
浏览文件 @ dc2af52c
此差异已折叠。
include/asm-generic/statfs.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/efi.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/etherdevice.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/fuse.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/gpio-pxa.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/hsi/hsi.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/i2c/twl.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/irq.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/kvm_host.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/libata.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/mfd/db5500-prcmu.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/mfd/rc5t583.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/mfd/twl6040.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/mm.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/mmc/card.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/netdevice.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/netfilter_bridge.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/nfs_xdr.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/nfsd/Kbuild
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/pinctrl/machine.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/pipe_fs_i.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/seqlock.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/skbuff.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/spi/spi.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/usb/hcd.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/usb/otg.h
浏览文件 @ dc2af52c
此差异已折叠。
include/linux/vm_event_item.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/bluetooth/hci_core.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/dst.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/ip6_fib.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/ip_vs.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/red.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/sctp/sctp.h
浏览文件 @ dc2af52c
此差异已折叠。
include/net/sock.h
浏览文件 @ dc2af52c
此差异已折叠。
include/scsi/libsas.h
浏览文件 @ dc2af52c
此差异已折叠。
include/scsi/sas_ata.h
浏览文件 @ dc2af52c
此差异已折叠。
init/do_mounts.c
浏览文件 @ dc2af52c
此差异已折叠。
init/main.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/compat.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/events/core.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/fork.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/irq/debug.h
浏览文件 @ dc2af52c
此差异已折叠。
kernel/power/swap.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/rcutree.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/sched/core.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/sched/fair.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/sched/features.h
浏览文件 @ dc2af52c
此差异已折叠。
kernel/time/tick-broadcast.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/trace/trace.c
浏览文件 @ dc2af52c
此差异已折叠。
kernel/trace/trace.h
浏览文件 @ dc2af52c
此差异已折叠。
kernel/trace/trace_output.c
浏览文件 @ dc2af52c
此差异已折叠。
lib/mpi/mpi-bit.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/hugetlb.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/memblock.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/memcontrol.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/mempolicy.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/migrate.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/mmap.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/nobootmem.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/nommu.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/page_alloc.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/percpu.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/swap_state.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/vmscan.c
浏览文件 @ dc2af52c
此差异已折叠。
mm/vmstat.c
浏览文件 @ dc2af52c
此差异已折叠。
net/8021q/vlan_dev.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ax25/af_ax25.c
浏览文件 @ dc2af52c
此差异已折叠。
net/bluetooth/hci_core.c
浏览文件 @ dc2af52c
此差异已折叠。
net/bluetooth/hci_event.c
浏览文件 @ dc2af52c
此差异已折叠。
net/bluetooth/mgmt.c
浏览文件 @ dc2af52c
此差异已折叠。
net/bridge/br_forward.c
浏览文件 @ dc2af52c
此差异已折叠。
net/bridge/br_netfilter.c
浏览文件 @ dc2af52c
此差异已折叠。
net/caif/chnl_net.c
浏览文件 @ dc2af52c
此差异已折叠。
net/core/dev.c
浏览文件 @ dc2af52c
此差异已折叠。
net/core/drop_monitor.c
浏览文件 @ dc2af52c
此差异已折叠。
net/core/net_namespace.c
浏览文件 @ dc2af52c
此差异已折叠。
net/core/pktgen.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ieee802154/6lowpan.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/fib_trie.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/inet_diag.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/tcp.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/tcp_input.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/tcp_output.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv4/udp_diag.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv6/addrconf.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv6/ip6_fib.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv6/ndisc.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv6/route.c
浏览文件 @ dc2af52c
此差异已折叠。
net/ipv6/tcp_ipv6.c
浏览文件 @ dc2af52c
此差异已折叠。
net/key/af_key.c
浏览文件 @ dc2af52c
此差异已折叠。
net/l2tp/l2tp_ip.c
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/ibss.c
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/ieee80211_i.h
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/iface.c
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/mlme.c
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/rx.c
浏览文件 @ dc2af52c
此差异已折叠。
net/mac80211/tx.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_core.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_ctl.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_ftp.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_lblc.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_lblcr.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/ipvs/ip_vs_proto.c
浏览文件 @ dc2af52c
此差异已折叠。
net/netfilter/xt_CT.c
浏览文件 @ dc2af52c
此差异已折叠。
net/openvswitch/datapath.c
浏览文件 @ dc2af52c
此差异已折叠。
net/openvswitch/flow.c
浏览文件 @ dc2af52c
此差异已折叠。
net/phonet/pn_dev.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sched/sch_gred.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sched/sch_netem.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sctp/output.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sctp/transport.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sunrpc/clnt.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sunrpc/rpc_pipe.c
浏览文件 @ dc2af52c
此差异已折叠。
net/sunrpc/sunrpc_syms.c
浏览文件 @ dc2af52c
此差异已折叠。
net/wireless/util.c
浏览文件 @ dc2af52c
此差异已折叠。
scripts/checkpatch.pl
浏览文件 @ dc2af52c
此差异已折叠。
scripts/mod/file2alias.c
浏览文件 @ dc2af52c
此差异已折叠。
scripts/xz_wrap.sh
浏览文件 @ dc2af52c
此差异已折叠。
security/commoncap.c
浏览文件 @ dc2af52c
此差异已折叠。
security/smack/smack_lsm.c
浏览文件 @ dc2af52c
此差异已折叠。
security/smack/smackfs.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/core/vmaster.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/last.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/echoaudio/echoaudio_dsp.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/hda/hda_codec.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/hda/patch_conexant.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/pci/rme9652/hdsp.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/blackfin/bf5xx-ssm2602.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/cs42l73.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/tlv320aic23.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/twl6040.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/wm8350.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/wm8994.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/codecs/wm_hubs.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/omap/Kconfig
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/omap/omap-pcm.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/samsung/s3c2412-i2s.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/sh/fsi.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/sh/migor.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ dc2af52c
此差异已折叠。
sound/soc/soc-dapm.c
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/.gitignore
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/Makefile
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/builtin-report.c
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/builtin-test.c
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/perf-archive.sh
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/util/parse-events.l
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/util/session.c
浏览文件 @ dc2af52c
此差异已折叠。
tools/perf/util/symbol.c
浏览文件 @ dc2af52c
此差异已折叠。
tools/testing/ktest/ktest.pl
浏览文件 @ dc2af52c
此差异已折叠。
virt/kvm/iommu.c
浏览文件 @ dc2af52c
此差异已折叠。
virt/kvm/kvm_main.c
浏览文件 @ dc2af52c
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或
反馈
建议 客服 返回
顶部