e1000e: convert to netdev features/hw_features API

Private rx_csum flags are now duplicate of netdev->features &
NETIF_F_RXCSUM.  Remove those duplicates and use the net_device_ops
ndo_set_features.  This is based on the original patch submitted by
Michał Mirosław <mirq-linux@rere.qmqm.pl>

Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/80003es2lan.c

@@ -1498,7 +1498,6 @@ struct e1000_info e1000_es2_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_RX_NEEDS_RESTART /* errata */
 				  | FLAG_TARC_SET_BIT_ZERO /* errata */

drivers/net/ethernet/intel/e1000e/82571.c

@@ -2019,7 +2019,6 @@ struct e1000_info e1000_82571_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_RESET_OVERWRITES_LAA /* errata */
@@ -2041,7 +2040,6 @@ struct e1000_info e1000_82572_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
 	.flags2			= FLAG2_DISABLE_ASPM_L1 /* errata 13 */
@@ -2059,7 +2057,6 @@ struct e1000_info e1000_82573_info = {
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_SWSM_ON_LOAD,
@@ -2080,7 +2077,6 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
@@ -2100,7 +2096,6 @@ struct e1000_info e1000_82583_info = {
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_JUMBO_FRAMES

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -440,12 +440,11 @@ struct e1000_info {
 #define FLAG_LSC_GIG_SPEED_DROP           (1 << 25)
 #define FLAG_SMART_POWER_DOWN             (1 << 26)
 #define FLAG_MSI_ENABLED                  (1 << 27)
-#define FLAG_RX_CSUM_ENABLED              (1 << 28)
+/* reserved (1 << 28) */
 #define FLAG_TSO_FORCE                    (1 << 29)
 #define FLAG_RX_RESTART_NOW               (1 << 30)
 #define FLAG_MSI_TEST_FAILED              (1 << 31)
 
-/* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
 #define FLAG2_IS_DISCARDING               (1 << 2)

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -367,59 +367,6 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	return retval;
 }
 
-static u32 e1000_get_rx_csum(struct net_device *netdev)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	return adapter->flags & FLAG_RX_CSUM_ENABLED;
-}
-
-static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
-	if (data)
-		adapter->flags |= FLAG_RX_CSUM_ENABLED;
-	else
-		adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
-
-	if (netif_running(netdev))
-		e1000e_reinit_locked(adapter);
-	else
-		e1000e_reset(adapter);
-	return 0;
-}
-
-static u32 e1000_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
-static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
-{
-	if (data)
-		netdev->features |= NETIF_F_HW_CSUM;
-	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
-
-	return 0;
-}
-
-static int e1000_set_tso(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
-	if (data) {
-		netdev->features |= NETIF_F_TSO;
-		netdev->features |= NETIF_F_TSO6;
-	} else {
-		netdev->features &= ~NETIF_F_TSO;
-		netdev->features &= ~NETIF_F_TSO6;
-	}
-
-	adapter->flags |= FLAG_TSO_FORCE;
-	return 0;
-}
-
 static u32 e1000_get_msglevel(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -2014,31 +1961,6 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
-static int e1000e_set_flags(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	bool need_reset = false;
-	int rc;
-
-	need_reset = (data & ETH_FLAG_RXVLAN) !=
-		     (netdev->features & NETIF_F_HW_VLAN_RX);
-
-	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
-				  ETH_FLAG_TXVLAN);
-
-	if (rc)
-		return rc;
-
-	if (need_reset) {
-		if (netif_running(netdev))
-			e1000e_reinit_locked(adapter);
-		else
-			e1000e_reset(adapter);
-	}
-
-	return 0;
-}
-
 static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
@@ -2058,14 +1980,6 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_ringparam		= e1000_set_ringparam,
 	.get_pauseparam		= e1000_get_pauseparam,
 	.set_pauseparam		= e1000_set_pauseparam,
-	.get_rx_csum		= e1000_get_rx_csum,
-	.set_rx_csum		= e1000_set_rx_csum,
-	.get_tx_csum		= e1000_get_tx_csum,
-	.set_tx_csum		= e1000_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= e1000_set_tso,
 	.self_test		= e1000_diag_test,
 	.get_strings		= e1000_get_strings,
 	.set_phys_id		= e1000_set_phys_id,
@@ -2073,8 +1987,6 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
-	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= e1000e_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -4058,7 +4058,6 @@ struct e1000_info e1000_ich8_info = {
 	.mac			= e1000_ich8lan,
 	.flags			= FLAG_HAS_WOL
 				  | FLAG_IS_ICH
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
@@ -4076,7 +4075,6 @@ struct e1000_info e1000_ich9_info = {
 	.flags			= FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_ERT
@@ -4095,7 +4093,6 @@ struct e1000_info e1000_ich10_info = {
 	.flags			= FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_ERT
@@ -4113,7 +4110,6 @@ struct e1000_info e1000_pch_info = {
 	.mac			= e1000_pchlan,
 	.flags			= FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
@@ -4133,7 +4129,6 @@ struct e1000_info e1000_pch2_info = {
 	.mac			= e1000_pch2lan,
 	.flags			= FLAG_IS_ICH
 				  | FLAG_HAS_WOL
-				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3069,7 +3069,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 
 	/* Enable Receive Checksum Offload for TCP and UDP */
 	rxcsum = er32(RXCSUM);
-	if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
+	if (adapter->netdev->features & NETIF_F_RXCSUM) {
 		rxcsum |= E1000_RXCSUM_TUOFL;
 
 		/*
@@ -5860,6 +5860,26 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 	}
 }
 
+static int e1000_set_features(struct net_device *netdev, u32 features)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	u32 changed = features ^ netdev->features;
+
+	if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
+		adapter->flags |= FLAG_TSO_FORCE;
+
+	if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
+			 NETIF_F_RXCSUM)))
+		return 0;
+
+	if (netif_running(netdev))
+		e1000e_reinit_locked(adapter);
+	else
+		e1000e_reset(adapter);
+
+	return 0;
+}
+
 static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_open		= e1000_open,
 	.ndo_stop		= e1000_close,
@@ -5877,6 +5897,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= e1000_netpoll,
 #endif
+	.ndo_set_features = e1000_set_features,
 };
 
 /**
@@ -6036,21 +6057,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (e1000_check_reset_block(&adapter->hw))
 		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
-	netdev->features = NETIF_F_SG |
-			   NETIF_F_HW_CSUM |
-			   NETIF_F_HW_VLAN_TX |
-			   NETIF_F_HW_VLAN_RX;
+	/* Set initial default active device features */
+	netdev->features = (NETIF_F_SG |
+			    NETIF_F_HW_VLAN_RX |
+			    NETIF_F_HW_VLAN_TX |
+			    NETIF_F_TSO |
+			    NETIF_F_TSO6 |
+			    NETIF_F_RXCSUM |
+			    NETIF_F_HW_CSUM);
+
+	/* Set user-changeable features (subset of all device features) */
+	netdev->hw_features = netdev->features;
 
 	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
 		netdev->features |= NETIF_F_HW_VLAN_FILTER;
 
-	netdev->features |= NETIF_F_TSO;
-	netdev->features |= NETIF_F_TSO6;
-
-	netdev->vlan_features |= NETIF_F_TSO;
-	netdev->vlan_features |= NETIF_F_TSO6;
-	netdev->vlan_features |= NETIF_F_HW_CSUM;
-	netdev->vlan_features |= NETIF_F_SG;
+	netdev->vlan_features |= (NETIF_F_SG |
+				  NETIF_F_TSO |
+				  NETIF_F_TSO6 |
+				  NETIF_F_HW_CSUM);
 
 	if (pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;