ARM: EXYNOS: add code for setting/clearing boot flag

This code is needed for cpuidle (W-)AFTR mode support on Exynos3250.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

arch/arm/mach-exynos/common.h

@@ -126,6 +126,12 @@ enum {
 
 void exynos_firmware_init(void);
 
+/* CPU BOOT mode flag for Exynos3250 SoC bootloader */
+#define C2_STATE	(1 << 3)
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
+
 extern u32 exynos_get_eint_wake_mask(void);
 
 #ifdef CONFIG_PM_SLEEP

arch/arm/mach-exynos/firmware.c

@@ -206,3 +206,28 @@ void __init exynos_firmware_init(void)
 		outer_cache.configure = exynos_l2_configure;
 	}
 }
+
+#define REG_CPU_STATE_ADDR	(sysram_ns_base_addr + 0x28)
+#define BOOT_MODE_MASK		0x1f
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+
+	if (mode & BOOT_MODE_MASK)
+		tmp &= ~BOOT_MODE_MASK;
+
+	tmp |= mode;
+	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}
+
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp &= ~mode;
+	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}