提交 db98f081 编写于 作者: S Stefan Roese 提交者: David S. Miller

net: fec_mpc52xx: Read MAC address from device-tree

Until now, the MPC5200 FEC ethernet driver relied upon the bootloader
(U-Boot) to write the MAC address into the ethernet controller
registers. The Linux driver should not rely on such a thing. So
lets read the MAC address from the DT as it should be done here.

The following priority is now used to read the MAC address:

1) First, try OF node MAC address, if not present or invalid, then:

2) Read from MAC address registers, if invalid, then:

3) Log a warning message, and choose a random MAC address.

This fixes a problem with a MPC5200 board that uses the SPL U-Boot
version without FEC initialization before Linux booting for
boot speedup.

Additionally a status line is now be printed upon successful
driver probing, also displaying this MAC address.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 af32de0e
......@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/netdevice.h>
......@@ -76,10 +77,6 @@ static void mpc52xx_fec_stop(struct net_device *dev);
static void mpc52xx_fec_start(struct net_device *dev);
static void mpc52xx_fec_reset(struct net_device *dev);
static u8 mpc52xx_fec_mac_addr[6];
module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0);
MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
static int debug = -1; /* the above default */
......@@ -110,15 +107,6 @@ static void mpc52xx_fec_set_paddr(struct net_device *dev, u8 *mac)
out_be32(&fec->paddr2, (*(u16 *)(&mac[4]) << 16) | FEC_PADDR2_TYPE);
}
static void mpc52xx_fec_get_paddr(struct net_device *dev, u8 *mac)
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
struct mpc52xx_fec __iomem *fec = priv->fec;
*(u32 *)(&mac[0]) = in_be32(&fec->paddr1);
*(u16 *)(&mac[4]) = in_be32(&fec->paddr2) >> 16;
}
static int mpc52xx_fec_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sock = addr;
......@@ -853,6 +841,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
struct resource mem;
const u32 *prop;
int prop_size;
struct device_node *np = op->dev.of_node;
const char *mac_addr;
phys_addr_t rx_fifo;
phys_addr_t tx_fifo;
......@@ -866,7 +856,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
priv->ndev = ndev;
/* Reserve FEC control zone */
rv = of_address_to_resource(op->dev.of_node, 0, &mem);
rv = of_address_to_resource(np, 0, &mem);
if (rv) {
printk(KERN_ERR DRIVER_NAME ": "
"Error while parsing device node resource\n" );
......@@ -919,7 +909,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Get the IRQ we need one by one */
/* Control */
ndev->irq = irq_of_parse_and_map(op->dev.of_node, 0);
ndev->irq = irq_of_parse_and_map(np, 0);
/* RX */
priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk);
......@@ -927,11 +917,33 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* TX */
priv->t_irq = bcom_get_task_irq(priv->tx_dmatsk);
/* MAC address init */
if (!is_zero_ether_addr(mpc52xx_fec_mac_addr))
memcpy(ndev->dev_addr, mpc52xx_fec_mac_addr, 6);
else
mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
/*
* MAC address init:
*
* First try to read MAC address from DT
*/
mac_addr = of_get_mac_address(np);
if (mac_addr) {
memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
} else {
struct mpc52xx_fec __iomem *fec = priv->fec;
/*
* If the MAC addresse is not provided via DT then read
* it back from the controller regs
*/
*(u32 *)(&ndev->dev_addr[0]) = in_be32(&fec->paddr1);
*(u16 *)(&ndev->dev_addr[4]) = in_be32(&fec->paddr2) >> 16;
}
/*
* Check if the MAC address is valid, if not get a random one
*/
if (!is_valid_ether_addr(ndev->dev_addr)) {
eth_hw_addr_random(ndev);
dev_warn(&ndev->dev, "using random MAC address %pM\n",
ndev->dev_addr);
}
priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
......@@ -942,20 +954,20 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Start with safe defaults for link connection */
priv->speed = 100;
priv->duplex = DUPLEX_HALF;
priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->dev.of_node) >> 20) / 5) << 1;
priv->mdio_speed = ((mpc5xxx_get_bus_frequency(np) >> 20) / 5) << 1;
/* The current speed preconfigures the speed of the MII link */
prop = of_get_property(op->dev.of_node, "current-speed", &prop_size);
prop = of_get_property(np, "current-speed", &prop_size);
if (prop && (prop_size >= sizeof(u32) * 2)) {
priv->speed = prop[0];
priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
}
/* If there is a phy handle, then get the PHY node */
priv->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
/* the 7-wire property means don't use MII mode */
if (of_find_property(op->dev.of_node, "fsl,7-wire-mode", NULL)) {
if (of_find_property(np, "fsl,7-wire-mode", NULL)) {
priv->seven_wire_mode = 1;
dev_info(&ndev->dev, "using 7-wire PHY mode\n");
}
......@@ -970,6 +982,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* We're done ! */
dev_set_drvdata(&op->dev, ndev);
printk(KERN_INFO "%s: %s MAC %pM\n",
ndev->name, op->dev.of_node->full_name, ndev->dev_addr);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册