Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 db95f150 编写于 作者: T Tülin İzer 提交者： Greg Kroah-Hartman
浏览文件
操作

Staging: bcm: Fixed warning 'space required before the open parenthesis '(''. 

This patch fixes warning 'space required before the open parenthesis '(''
found by checkpacth.pl in driver bcm.
Signed-off-by: NTülin İzer <tulinizer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 461c8d24
隐藏空白更改
内联 并排
Showing with 24 addition and 24 deletion
drivers/staging/bcm/InterfaceIdleMode.c
浏览文件 @ db95f150
......@@ -50,27 +50,27 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));
if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
if(ntohl(*(puiBuffer+1)) == 0 ) {
if (ntohl(*(puiBuffer+1)) == 0 ) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");
status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
return status;
}
if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
uiRegRead = 0x00000000 ;
status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
return status;
}
}
/* Below Register should not br read in case of Manual and Protocol Idle mode */
else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
/* clear on read Register */
bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
if (bytes < 0) {
......@@ -95,7 +95,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
wake_up(&Adapter->lowpower_mode_wait_queue);
} else {
if(TRUE == Adapter->IdleMode)
if (TRUE == Adapter->IdleMode)
{
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
return status ;
......@@ -120,7 +120,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
uiRegRead |= (1<<17);
status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
return status;
}
......@@ -128,7 +128,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
}
SendIdleModeResponse(Adapter);
}
} else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
} else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
OverrideServiceFlowParams(Adapter, puiBuffer);
}
......@@ -147,33 +147,33 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
/* Abort Bus suspend if its already suspended */
if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
status = usb_autopm_get_interface(psInterfaceAdapter->interface);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);
}
if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
||
(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
/* write the SW abort pattern. */
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
return status;
}
}
if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
value = 0x80000000;
status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
if(status)
if (status)
{
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
return status;
}
} else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
} else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
/*
* Get a Interrupt Out URB and send 8 Bytes Down
* To be Done in Thread Context.
......@@ -186,7 +186,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
8,
&lenwritten,
5000);
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
return status;
} else {
......@@ -196,21 +196,21 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
/* mdelay(25); */
timeout = jiffies + msecs_to_jiffies(50) ;
while( timeout > jiffies ) {
while ( timeout > jiffies ) {
itr++ ;
rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
if(0xbece3200 == (chip_id&~(0xF0)))
if (0xbece3200 == (chip_id&~(0xF0)))
chip_id = chip_id&~(0xF0);
if(chip_id == Adapter->chip_id)
if (chip_id == Adapter->chip_id)
break;
}
if(timeout < jiffies )
if (timeout < jiffies )
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
else
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);
status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
if(status) {
if (status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
return status;
}
......@@ -220,7 +220,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
{
ULONG Status = 0;
if(Adapter->bTriedToWakeUpFromlowPowerMode) {
if (Adapter->bTriedToWakeUpFromlowPowerMode) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
} else {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
......@@ -237,11 +237,11 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
INT Status = 0;
int bytes;
if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
/* clear idlemode interrupt. */
uiRegVal = 0;
Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
if(Status) {
if (Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
return;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或