spi: pl022: Add support for chip select extension

Add support for a extended PL022 which has an extra register for controlling up
to five chip select signals. This controller is found on the AXM5516 SoC.
Unfortunately the PrimeCell identification registers are identical to a
standard ARM PL022. To work around this, the peripheral ID must be overridden
in the device tree using the "arm,primecell-periphid" property with the value
0x000b6022.
Signed-off-by: NAnders Berg <anders.berg@avagotech.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/spi/spi-pl022.c

@@ -82,6 +82,7 @@
 #define SSP_MIS(r)	(r + 0x01C)
 #define SSP_ICR(r)	(r + 0x020)
 #define SSP_DMACR(r)	(r + 0x024)
+#define SSP_CSR(r)	(r + 0x030) /* vendor extension */
 #define SSP_ITCR(r)	(r + 0x080)
 #define SSP_ITIP(r)	(r + 0x084)
 #define SSP_ITOP(r)	(r + 0x088)
@@ -197,6 +198,12 @@
 /* Transmit DMA Enable bit */
 #define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
 
+/*
+ * SSP Chip Select Control Register - SSP_CSR
+ * (vendor extension)
+ */
+#define SSP_CSR_CSVALUE_MASK		(0x1FUL << 0)
+
 /*
  * SSP Integration Test control Register - SSP_ITCR
  */
@@ -313,6 +320,7 @@ enum ssp_writing {
  * @extended_cr: 32 bit wide control register 0 with extra
  * features and extra features in CR1 as found in the ST variants
  * @pl023: supports a subset of the ST extensions called "PL023"
+ * @internal_cs_ctrl: supports chip select control register
  */
 struct vendor_data {
 	int fifodepth;
@@ -321,6 +329,7 @@ struct vendor_data {
 	bool extended_cr;
 	bool pl023;
 	bool loopback;
+	bool internal_cs_ctrl;
 };
 
 /**
@@ -440,9 +449,32 @@ static void null_cs_control(u32 command)
 	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
 }
 
+/**
+ * internal_cs_control - Control chip select signals via SSP_CSR.
+ * @pl022: SSP driver private data structure
+ * @command: select/delect the chip
+ *
+ * Used on controller with internal chip select control via SSP_CSR register
+ * (vendor extension). Each of the 5 LSB in the register controls one chip
+ * select signal.
+ */
+static void internal_cs_control(struct pl022 *pl022, u32 command)
+{
+	u32 tmp;
+
+	tmp = readw(SSP_CSR(pl022->virtbase));
+	if (command == SSP_CHIP_SELECT)
+		tmp &= ~BIT(pl022->cur_cs);
+	else
+		tmp |= BIT(pl022->cur_cs);
+	writew(tmp, SSP_CSR(pl022->virtbase));
+}
+
 static void pl022_cs_control(struct pl022 *pl022, u32 command)
 {
-	if (gpio_is_valid(pl022->cur_cs))
+	if (pl022->vendor->internal_cs_ctrl)
+		internal_cs_control(pl022, command);
+	else if (gpio_is_valid(pl022->cur_cs))
 		gpio_set_value(pl022->cur_cs, command);
 	else
 		pl022->cur_chip->cs_control(command);
@@ -2122,6 +2154,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	if (platform_info->num_chipselect && platform_info->chipselects) {
 		for (i = 0; i < num_cs; i++)
 			pl022->chipselects[i] = platform_info->chipselects[i];
+	} else if (pl022->vendor->internal_cs_ctrl) {
+		for (i = 0; i < num_cs; i++)
+			pl022->chipselects[i] = i;
 	} else if (IS_ENABLED(CONFIG_OF)) {
 		for (i = 0; i < num_cs; i++) {
 			int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
@@ -2352,6 +2387,7 @@ static struct vendor_data vendor_arm = {
 	.extended_cr = false,
 	.pl023 = false,
 	.loopback = true,
+	.internal_cs_ctrl = false,
 };
 
 static struct vendor_data vendor_st = {
@@ -2361,6 +2397,7 @@ static struct vendor_data vendor_st = {
 	.extended_cr = true,
 	.pl023 = false,
 	.loopback = true,
+	.internal_cs_ctrl = false,
 };
 
 static struct vendor_data vendor_st_pl023 = {
@@ -2370,6 +2407,17 @@ static struct vendor_data vendor_st_pl023 = {
 	.extended_cr = true,
 	.pl023 = true,
 	.loopback = false,
+	.internal_cs_ctrl = false,
+};
+
+static struct vendor_data vendor_lsi = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+	.extended_cr = false,
+	.pl023 = false,
+	.loopback = true,
+	.internal_cs_ctrl = true,
 };
 
 static struct amba_id pl022_ids[] = {
@@ -2403,6 +2451,15 @@ static struct amba_id pl022_ids[] = {
 		.mask	= 0xffffffff,
 		.data	= &vendor_st_pl023,
 	},
+	{
+		/*
+		 * PL022 variant that has a chip select control register whih
+		 * allows control of 5 output signals nCS[0:4].
+		 */
+		.id	= 0x000b6022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_lsi,
+	},
 	{ 0, 0 },
 };
 

include/linux/amba/bus.h

@@ -44,10 +44,15 @@ struct amba_driver {
 	const struct amba_id	*id_table;
 };
 
+/*
+ * Constants for the designer field of the Peripheral ID register. When bit 7
+ * is set to '1', bits [6:0] should be the JEP106 manufacturer identity code.
+ */
 enum amba_vendor {
 	AMBA_VENDOR_ARM = 0x41,
 	AMBA_VENDOR_ST = 0x80,
 	AMBA_VENDOR_QCOM = 0x51,
+	AMBA_VENDOR_LSI = 0xb6,
 };
 
 extern struct bus_type amba_bustype;