Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (27 commits)
  [POWERPC] 83xx: Update mpc8349emitx(gp) defconfig for USB
  [POWERPC] 83xx: Update mpc832x_rdb_defconfig to enable MMC-over-SPI
  [POWERPC] 83xx: MPC832x RDB - remove spidev stub, use mmc_spi
  [POWERPC] 8xxx: MDS board RTC fixes
  [POWERPC] Fix 8xx build breakage due to _tlbie changes
  [POWERPC] Fix device tree interrupt map for Freescale ULI1575 boards
  [POWERPC] Fix possible division by zero in scaled time accounting
  [POWERPC] spufs: Fix context destroy vs /spu readdir race
  [POWERPC] Fix RTAS os-term usage on kernel panic
  [POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratum
  [POWERPC] Document rgmii-rxid and rgmii-txid phy-connection-types
  [POWERPC] 83xx: Fix 2nd UCC entry in mpc832x_mds.dts
  [POWERPC] 83xx: mpc832x mds: Fix board PHY reset code
  [POWERPC] Fix potential NULL dereference
  [POWERPC] vdso: Fixes for cache block sizes
  [POWERPC] pasemi: Don't reset mpic at boot
  [POWERPC] Fix kmalloc alignment on non-coherent DMA platforms
  [POWERPC] Fix build failure on legacy iSeries
  [POWERPC] 4xx: Use virtual PVR value to init FPU on arch/ppc 440EP
  [POWERPC] 4xx: UIC add mask_ack callback
  ...

Documentation/powerpc/booting-without-of.txt

@@ -1645,8 +1645,9 @@ platforms are moved over to use the flattened-device-tree model.
      MAC addresses passed by the firmware when no information other
      than indices is available to associate an address with a device.
    - phy-connection-type : a string naming the controller/PHY interface type,
-     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
-     or "rtbi".
+     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
+     Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
+     "tbi", or "rtbi".
 
    Example:
 	ucc@2000 {

arch/powerpc/boot/dts/mpc832x_mds.dts

@@ -57,12 +57,19 @@
 		};
 
 		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
 			interrupt-parent = < &ipic >;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <68>;
+			};
 		};
 
 		serial@4500 {
@@ -104,7 +111,7 @@
 			reg = <700 100>;
 			device_type = "ipic";
 		};
-		
+
 		par_io@1400 {
 			reg = <1400 100>;
 			device_type = "par_io";
@@ -117,7 +124,6 @@
 					3  5  1  0  2  0  /* MDC */
 					0  d  2  0  1  0 	/* RX_CLK (CLK9) */
 					3 18  2  0  1  0 	/* TX_CLK (CLK10) */
-					1  1  1  0  1  0 	/* TxD1 */
 					1  0  1  0  1  0 	/* TxD0 */
 					1  1  1  0  1  0 	/* TxD1 */
 					1  2  1  0  1  0 	/* TxD2 */
@@ -165,11 +171,11 @@
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <BCD3D80>;
-		
+
 		muram@10000 {
 			device_type = "muram";
 			ranges = <0 00010000 00004000>;
-	
+
 			data-only@0 {
 				reg = <0 4000>;
 			};
@@ -228,7 +234,7 @@
 			compatible = "ucc_geth";
 			model = "UCC";
 			device-id = <4>;
-			reg = <3000 200>;
+			reg = <3200 200>;
 			interrupts = <23>;
 			interrupt-parent = < &qeic >;
 			/*

arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -57,15 +57,24 @@
 		};
 
 		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
 			interrupt-parent = < &ipic >;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <68>;
+			};
 		};
 
 		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3100 100>;

arch/powerpc/boot/dts/mpc836x_mds.dts

@@ -62,15 +62,24 @@
 		};
 
 		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
 			interrupt-parent = < &ipic >;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <68>;
+			};
 		};
 
 		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3100 100>;

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -272,24 +272,24 @@
 		clock-frequency = <1fca055>;
 		interrupt-parent = <&mpic>;
 		interrupts = <1b 2>;
-		interrupt-map-mask = <fb00 0 0 0>;
+		interrupt-map-mask = <ff00 0 0 1>;
 		interrupt-map = <
 			// IDSEL 0x1c  USB
-			e000 0 0 0 &i8259 c 2
-			e100 0 0 0 &i8259 9 2
-			e200 0 0 0 &i8259 a 2
-			e300 0 0 0 &i8259 b 2
+			e000 0 0 1 &i8259 c 2
+			e100 0 0 1 &i8259 9 2
+			e200 0 0 1 &i8259 a 2
+			e300 0 0 1 &i8259 b 2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 0 &i8259 6 2
+			e800 0 0 1 &i8259 6 2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 0 &i8259 7 2
-			f100 0 0 0 &i8259 7 2
+			f000 0 0 1 &i8259 7 2
+			f100 0 0 1 &i8259 7 2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 0 &i8259 e 2
-			f900 0 0 0 &i8259 5 2
+			f800 0 0 1 &i8259 e 2
+			f900 0 0 1 &i8259 5 2
 		>;
 
 		pcie@0 {

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -219,36 +219,120 @@
 		clock-frequency = <1fca055>;
 		interrupt-parent = <&mpic>;
 		interrupts = <18 2>;
-		interrupt-map-mask = <fb00 0 0 0>;
+		interrupt-map-mask = <ff00 0 0 7>;
 		interrupt-map = <
-			/* IDSEL 0x11 - PCI slot 1 */
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
 			8800 0 0 1 &mpic 2 1
 			8800 0 0 2 &mpic 3 1
 			8800 0 0 3 &mpic 4 1
 			8800 0 0 4 &mpic 1 1
 
-			/* IDSEL 0x12 - PCI slot 2 */
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			8900 0 0 1 &mpic 2 1
+			8900 0 0 2 &mpic 3 1
+			8900 0 0 3 &mpic 4 1
+			8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			8a00 0 0 1 &mpic 2 1
+			8a00 0 0 2 &mpic 3 1
+			8a00 0 0 3 &mpic 4 1
+			8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			8b00 0 0 1 &mpic 2 1
+			8b00 0 0 2 &mpic 3 1
+			8b00 0 0 3 &mpic 4 1
+			8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			8c00 0 0 1 &mpic 2 1
+			8c00 0 0 2 &mpic 3 1
+			8c00 0 0 3 &mpic 4 1
+			8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			8d00 0 0 1 &mpic 2 1
+			8d00 0 0 2 &mpic 3 1
+			8d00 0 0 3 &mpic 4 1
+			8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			8e00 0 0 1 &mpic 2 1
+			8e00 0 0 2 &mpic 3 1
+			8e00 0 0 3 &mpic 4 1
+			8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			8f00 0 0 1 &mpic 2 1
+			8f00 0 0 2 &mpic 3 1
+			8f00 0 0 3 &mpic 4 1
+			8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
 			9000 0 0 1 &mpic 3 1
 			9000 0 0 2 &mpic 4 1
 			9000 0 0 3 &mpic 1 1
 			9000 0 0 4 &mpic 2 1
 
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			9100 0 0 1 &mpic 3 1
+			9100 0 0 2 &mpic 4 1
+			9100 0 0 3 &mpic 1 1
+			9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			9200 0 0 1 &mpic 3 1
+			9200 0 0 2 &mpic 4 1
+			9200 0 0 3 &mpic 1 1
+			9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			9300 0 0 1 &mpic 3 1
+			9300 0 0 2 &mpic 4 1
+			9300 0 0 3 &mpic 1 1
+			9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			9400 0 0 1 &mpic 3 1
+			9400 0 0 2 &mpic 4 1
+			9400 0 0 3 &mpic 1 1
+			9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			9500 0 0 1 &mpic 3 1
+			9500 0 0 2 &mpic 4 1
+			9500 0 0 3 &mpic 1 1
+			9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			9600 0 0 1 &mpic 3 1
+			9600 0 0 2 &mpic 4 1
+			9600 0 0 3 &mpic 1 1
+			9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			9700 0 0 1 &mpic 3 1
+			9700 0 0 2 &mpic 4 1
+			9700 0 0 3 &mpic 1 1
+			9700 0 0 4 &mpic 2 1
+
 			// IDSEL 0x1c  USB
-			e000 0 0 0 &i8259 c 2
-			e100 0 0 0 &i8259 9 2
-			e200 0 0 0 &i8259 a 2
-			e300 0 0 0 &i8259 b 2
+			e000 0 0 1 &i8259 c 2
+			e100 0 0 1 &i8259 9 2
+			e200 0 0 1 &i8259 a 2
+			e300 0 0 1 &i8259 b 2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 0 &i8259 6 2
+			e800 0 0 1 &i8259 6 2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 0 &i8259 7 2
-			f100 0 0 0 &i8259 7 2
+			f000 0 0 1 &i8259 7 2
+			f100 0 0 1 &i8259 7 2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 0 &i8259 e 2
-			f900 0 0 0 &i8259 5 2
+			f800 0 0 1 &i8259 e 2
+			f900 0 0 1 &i8259 5 2
 
 			>;
 

arch/powerpc/boot/dts/mpc8641_hpcn.dts

@@ -235,36 +235,120 @@
 		clock-frequency = <1fca055>;
 		interrupt-parent = <&mpic>;
 		interrupts = <18 2>;
-		interrupt-map-mask = <fb00 0 0 0>;
+		interrupt-map-mask = <ff00 0 0 7>;
 		interrupt-map = <
-			/* IDSEL 0x11 */
-			8800 0 0 1 &i8259 9 2
-			8800 0 0 2 &i8259 a 2
-			8800 0 0 3 &i8259 b 2
-			8800 0 0 4 &i8259 c 2
-
-			/* IDSEL 0x12 */
-			9000 0 0 1 &i8259 a 2
-			9000 0 0 2 &i8259 b 2
-			9000 0 0 3 &i8259 c 2
-			9000 0 0 4 &i8259 9 2
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			8800 0 0 1 &mpic 2 1
+			8800 0 0 2 &mpic 3 1
+			8800 0 0 3 &mpic 4 1
+			8800 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			8900 0 0 1 &mpic 2 1
+			8900 0 0 2 &mpic 3 1
+			8900 0 0 3 &mpic 4 1
+			8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			8a00 0 0 1 &mpic 2 1
+			8a00 0 0 2 &mpic 3 1
+			8a00 0 0 3 &mpic 4 1
+			8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			8b00 0 0 1 &mpic 2 1
+			8b00 0 0 2 &mpic 3 1
+			8b00 0 0 3 &mpic 4 1
+			8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			8c00 0 0 1 &mpic 2 1
+			8c00 0 0 2 &mpic 3 1
+			8c00 0 0 3 &mpic 4 1
+			8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			8d00 0 0 1 &mpic 2 1
+			8d00 0 0 2 &mpic 3 1
+			8d00 0 0 3 &mpic 4 1
+			8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			8e00 0 0 1 &mpic 2 1
+			8e00 0 0 2 &mpic 3 1
+			8e00 0 0 3 &mpic 4 1
+			8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			8f00 0 0 1 &mpic 2 1
+			8f00 0 0 2 &mpic 3 1
+			8f00 0 0 3 &mpic 4 1
+			8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			9000 0 0 1 &mpic 3 1
+			9000 0 0 2 &mpic 4 1
+			9000 0 0 3 &mpic 1 1
+			9000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			9100 0 0 1 &mpic 3 1
+			9100 0 0 2 &mpic 4 1
+			9100 0 0 3 &mpic 1 1
+			9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			9200 0 0 1 &mpic 3 1
+			9200 0 0 2 &mpic 4 1
+			9200 0 0 3 &mpic 1 1
+			9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			9300 0 0 1 &mpic 3 1
+			9300 0 0 2 &mpic 4 1
+			9300 0 0 3 &mpic 1 1
+			9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			9400 0 0 1 &mpic 3 1
+			9400 0 0 2 &mpic 4 1
+			9400 0 0 3 &mpic 1 1
+			9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			9500 0 0 1 &mpic 3 1
+			9500 0 0 2 &mpic 4 1
+			9500 0 0 3 &mpic 1 1
+			9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			9600 0 0 1 &mpic 3 1
+			9600 0 0 2 &mpic 4 1
+			9600 0 0 3 &mpic 1 1
+			9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			9700 0 0 1 &mpic 3 1
+			9700 0 0 2 &mpic 4 1
+			9700 0 0 3 &mpic 1 1
+			9700 0 0 4 &mpic 2 1
 
 			// IDSEL 0x1c  USB
-			e000 0 0 0 &i8259 c 2
-			e100 0 0 0 &i8259 9 2
-			e200 0 0 0 &i8259 a 2
-			e300 0 0 0 &i8259 b 2
+			e000 0 0 1 &i8259 c 2
+			e100 0 0 1 &i8259 9 2
+			e200 0 0 1 &i8259 a 2
+			e300 0 0 1 &i8259 b 2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 0 &i8259 6 2
+			e800 0 0 1 &i8259 6 2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 0 &i8259 7 2
-			f100 0 0 0 &i8259 7 2
+			f000 0 0 1 &i8259 7 2
+			f100 0 0 1 &i8259 7 2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 0 &i8259 e 2
-			f900 0 0 0 &i8259 5 2
+			f800 0 0 1 &i8259 e 2
+			f900 0 0 1 &i8259 5 2
 			>;
 
 		pcie@0 {

arch/powerpc/configs/mpc832x_mds_defconfig

@@ -774,7 +774,53 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 
 #
 # DMA Engine support

arch/powerpc/configs/mpc832x_rdb_defconfig

@@ -685,8 +685,21 @@ CONFIG_I2C_MPC=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -710,6 +723,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -896,7 +910,24 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1101,9 +1132,9 @@ CONFIG_UCC=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y

arch/powerpc/configs/mpc834x_itx_defconfig

@@ -867,7 +867,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_FSL=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 

arch/powerpc/configs/mpc834x_itxgp_defconfig

@@ -760,14 +760,100 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
 #
 # USB Gadget Support
 #

arch/powerpc/configs/mpc834x_mds_defconfig

@@ -721,7 +721,53 @@ CONFIG_USB_EHCI_FSL=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 
 #
 # DMA Engine support

arch/powerpc/configs/mpc836x_mds_defconfig

@@ -773,7 +773,53 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 
 #
 # DMA Engine support

arch/powerpc/configs/mpc8568mds_defconfig

@@ -768,7 +768,53 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 
 #
 # DMA Engine support

arch/powerpc/kernel/asm-offsets.c

@@ -284,6 +284,10 @@ int main(void)
 	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
 	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
 	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
+	DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size));
+	DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size));
+	DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size));
+	DEFINE(CFG_DCACHE_LOGBLOCKSZ, offsetof(struct vdso_data, dcache_log_block_size));
 #ifdef CONFIG_PPC64
 	DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64));
 	DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec));

arch/powerpc/kernel/rtas.c

@@ -19,6 +19,9 @@
 #include <linux/init.h>
 #include <linux/capability.h>
 #include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+#include <linux/cpumask.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -34,6 +37,8 @@
 #include <asm/lmb.h>
 #include <asm/udbg.h>
 #include <asm/syscalls.h>
+#include <asm/smp.h>
+#include <asm/atomic.h>
 
 struct rtas_t rtas = {
 	.lock = SPIN_LOCK_UNLOCKED
@@ -41,8 +46,10 @@ struct rtas_t rtas = {
 EXPORT_SYMBOL(rtas);
 
 struct rtas_suspend_me_data {
-	long waiting;
-	struct rtas_args *args;
+	atomic_t working; /* number of cpus accessing this struct */
+	int token; /* ibm,suspend-me */
+	int error;
+	struct completion *complete; /* wait on this until working == 0 */
 };
 
 DEFINE_SPINLOCK(rtas_data_buf_lock);
@@ -631,18 +638,18 @@ void rtas_halt(void)
 /* Must be in the RMO region, so we place it here */
 static char rtas_os_term_buf[2048];
 
-void rtas_os_term(char *str)
+void rtas_panic_msg(char *str)
 {
-	int status;
+	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
+}
 
-	if (panic_timeout)
-		return;
+void rtas_os_term(void)
+{
+	int status;
 
 	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
 		return;
 
-	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
-
 	do {
 		status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
 				   __pa(rtas_os_term_buf));
@@ -657,50 +664,62 @@ static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
 #ifdef CONFIG_PPC_PSERIES
 static void rtas_percpu_suspend_me(void *info)
 {
-	int i;
 	long rc;
-	long flags;
+	unsigned long msr_save;
+	int cpu;
 	struct rtas_suspend_me_data *data =
 		(struct rtas_suspend_me_data *)info;
 
-	/*
-	 * We use "waiting" to indicate our state.  As long
-	 * as it is >0, we are still trying to all join up.
-	 * If it goes to 0, we have successfully joined up and
-	 * one thread got H_CONTINUE.  If any error happens,
-	 * we set it to <0.
-	 */
-	local_irq_save(flags);
-	do {
-		rc = plpar_hcall_norets(H_JOIN);
-		smp_rmb();
-	} while (rc == H_SUCCESS && data->waiting > 0);
-	if (rc == H_SUCCESS)
-		goto out;
+	atomic_inc(&data->working);
+
+	/* really need to ensure MSR.EE is off for H_JOIN */
+	msr_save = mfmsr();
+	mtmsr(msr_save & ~(MSR_EE));
+
+	rc = plpar_hcall_norets(H_JOIN);
 
-	if (rc == H_CONTINUE) {
-		data->waiting = 0;
-		data->args->args[data->args->nargs] =
-			rtas_call(ibm_suspend_me_token, 0, 1, NULL);
-		for_each_possible_cpu(i)
-			plpar_hcall_norets(H_PROD,i);
+	mtmsr(msr_save);
+
+	if (rc == H_SUCCESS) {
+		/* This cpu was prodded and the suspend is complete. */
+		goto out;
+	} else if (rc == H_CONTINUE) {
+		/* All other cpus are in H_JOIN, this cpu does
+		 * the suspend.
+		 */
+		printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
+		       smp_processor_id());
+		data->error = rtas_call(data->token, 0, 1, NULL);
+
+		if (data->error)
+			printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
+			       data->error);
 	} else {
-		data->waiting = -EBUSY;
-		printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
+		printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
+		       smp_processor_id(), rc);
+		data->error = rc;
 	}
-
+	/* This cpu did the suspend or got an error; in either case,
+	 * we need to prod all other other cpus out of join state.
+	 * Extra prods are harmless.
+	 */
+	for_each_online_cpu(cpu)
+		plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
 out:
-	local_irq_restore(flags);
-	return;
+	if (atomic_dec_return(&data->working) == 0)
+		complete(data->complete);
 }
 
 static int rtas_ibm_suspend_me(struct rtas_args *args)
 {
-	int i;
 	long state;
 	long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 	struct rtas_suspend_me_data data;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	if (!rtas_service_present("ibm,suspend-me"))
+		return -ENOSYS;
 
 	/* Make sure the state is valid */
 	rc = plpar_hcall(H_VASI_STATE, retbuf,
@@ -721,25 +740,23 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 		return 0;
 	}
 
-	data.waiting = 1;
-	data.args = args;
+	atomic_set(&data.working, 0);
+	data.token = rtas_token("ibm,suspend-me");
+	data.error = 0;
+	data.complete = &done;
 
 	/* Call function on all CPUs.  One of us will make the
 	 * rtas call
 	 */
 	if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0))
-		data.waiting = -EINVAL;
+		data.error = -EINVAL;
 
-	if (data.waiting != 0)
-		printk(KERN_ERR "Error doing global join\n");
+	wait_for_completion(&done);
 
-	/* Prod each CPU.  This won't hurt, and will wake
-	 * anyone we successfully put to sleep with H_JOIN.
-	 */
-	for_each_possible_cpu(i)
-		plpar_hcall_norets(H_PROD, i);
+	if (data.error != 0)
+		printk(KERN_ERR "Error doing global join\n");
 
-	return data.waiting;
+	return data.error;
 }
 #else /* CONFIG_PPC_PSERIES */
 static int rtas_ibm_suspend_me(struct rtas_args *args)

arch/powerpc/kernel/time.c

@@ -241,8 +241,9 @@ void account_system_vtime(struct task_struct *tsk)
 		/* deltascaled includes both user and system time.
 		 * Hence scale it based on the purr ratio to estimate
 		 * the system time */
-		deltascaled = deltascaled * get_paca()->system_time /
-			(get_paca()->system_time + get_paca()->user_time);
+		if (get_paca()->user_time)
+			deltascaled = deltascaled * get_paca()->system_time /
+			     (get_paca()->system_time + get_paca()->user_time);
 		delta += get_paca()->system_time;
 		get_paca()->system_time = 0;
 	}

arch/powerpc/kernel/vdso.c

@@ -699,11 +699,22 @@ static int __init vdso_init(void)
 	vdso_data->icache_size = ppc64_caches.isize;
 	vdso_data->icache_line_size = ppc64_caches.iline_size;
 
+	/* XXXOJN: Blocks should be added to ppc64_caches and used instead */
+	vdso_data->dcache_block_size = ppc64_caches.dline_size;
+	vdso_data->icache_block_size = ppc64_caches.iline_size;
+	vdso_data->dcache_log_block_size = ppc64_caches.log_dline_size;
+	vdso_data->icache_log_block_size = ppc64_caches.log_iline_size;
+
 	/*
 	 * Calculate the size of the 64 bits vDSO
 	 */
 	vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
 	DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
+#else
+	vdso_data->dcache_block_size = L1_CACHE_BYTES;
+	vdso_data->dcache_log_block_size = L1_CACHE_SHIFT;
+	vdso_data->icache_block_size = L1_CACHE_BYTES;
+	vdso_data->icache_log_block_size = L1_CACHE_SHIFT;
 #endif /* CONFIG_PPC64 */
 
 

arch/powerpc/kernel/vdso32/cacheflush.S

@@ -23,29 +23,46 @@
  *
  * Flushes the data cache & invalidate the instruction cache for the
  * provided range [start, end[
- *
- * Note: all CPUs supported by this kernel have a 128 bytes cache
- * line size so we don't have to peek that info from the datapage
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache)
   .cfi_startproc
-	li	r5,127
-	andc	r6,r3,r5		/* round low to line bdy */
+	mflr	r12
+  .cfi_register lr,r12
+	mr	r11,r3
+	bl	__get_datapage@local
+	mtlr	r12
+	mr	r10,r3
+
+	lwz	r7,CFG_DCACHE_BLOCKSZ(r10)
+	addi	r5,r7,-1
+	andc	r6,r11,r5		/* round low to line bdy */
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
-	srwi.	r8,r8,7			/* compute line count */
+	lwz	r9,CFG_DCACHE_LOGBLOCKSZ(r10)
+	srw.	r8,r8,r9		/* compute line count */
 	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
-	mr	r3,r6
-1:	dcbst	0,r3
-	addi	r3,r3,128
+1:	dcbst	0,r6
+	add	r6,r6,r7
 	bdnz	1b
 	sync
+
+/* Now invalidate the instruction cache */
+
+	lwz	r7,CFG_ICACHE_BLOCKSZ(r10)
+	addi	r5,r7,-1
+	andc	r6,r11,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5
+	lwz	r9,CFG_ICACHE_LOGBLOCKSZ(r10)
+	srw.	r8,r8,r9		/* compute line count */
+	crclr	cr0*4+so
+	beqlr				/* nothing to do? */
 	mtctr	r8
-1:	icbi	0,r6
-	addi	r6,r6,128
-	bdnz	1b
+2:	icbi	0,r6
+	add	r6,r6,r7
+	bdnz	2b
 	isync
 	li	r3,0
 	blr

arch/powerpc/kernel/vdso64/cacheflush.S

@@ -23,29 +23,46 @@
  *
  * Flushes the data cache & invalidate the instruction cache for the
  * provided range [start, end[
- *
- * Note: all CPUs supported by this kernel have a 128 bytes cache
- * line size so we don't have to peek that info from the datapage
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache)
   .cfi_startproc
-	li	r5,127
-	andc	r6,r3,r5		/* round low to line bdy */
+	mflr	r12
+  .cfi_register lr,r12
+	mr	r11,r3
+	bl	V_LOCAL_FUNC(__get_datapage)
+	mtlr	r12
+	mr	r10,r3
+
+	lwz	r7,CFG_DCACHE_BLOCKSZ(r10)
+	addi	r5,r7,-1
+	andc	r6,r11,r5		/* round low to line bdy */
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
-	srwi.	r8,r8,7			/* compute line count */
+	lwz	r9,CFG_DCACHE_LOGBLOCKSZ(r10)
+	srw.	r8,r8,r9		/* compute line count */
 	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
-	mr	r3,r6
-1:	dcbst	0,r3
-	addi	r3,r3,128
+1:	dcbst	0,r6
+	add	r6,r6,r7
 	bdnz	1b
 	sync
+
+/* Now invalidate the instruction cache */
+
+	lwz	r7,CFG_ICACHE_BLOCKSZ(r10)
+	addi	r5,r7,-1
+	andc	r6,r11,r5		/* round low to line bdy */
+	subf	r8,r6,r4		/* compute length */
+	add	r8,r8,r5
+	lwz	r9,CFG_ICACHE_LOGBLOCKSZ(r10)
+	srw.	r8,r8,r9		/* compute line count */
+	crclr	cr0*4+so
+	beqlr				/* nothing to do? */
 	mtctr	r8
-1:	icbi	0,r6
-	addi	r6,r6,128
-	bdnz	1b
+2:	icbi	0,r6
+	add	r6,r6,r7
+	bdnz	2b
 	isync
 	li	r3,0
 	blr

arch/powerpc/mm/mem.c

@@ -464,7 +464,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 		 * we invalidate the TLB here, thus avoiding dcbst
 		 * misbehaviour.
 		 */
-		_tlbie(address);
+		_tlbie(address, 0 /* 8xx doesn't care about PID */);
 #endif
 		if (!PageReserved(page)
 		    && !test_bit(PG_arch_1, &page->flags)) {

arch/powerpc/mm/mmu_decl.h

@@ -56,7 +56,7 @@ extern unsigned long total_lowmem;
  * architectures.  -- Dan
  */
 #if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
 #define MMU_init_hw()		do { } while(0)
 #define mmu_mapin_ram()		(0UL)
 

arch/powerpc/mm/stab.c

@@ -20,6 +20,7 @@
 #include <asm/lmb.h>
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
+#include <asm/iseries/hv_call.h>
 
 struct stab_entry {
 	unsigned long esid_data;

arch/powerpc/platforms/40x/walnut.c

@@ -17,12 +17,13 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_platform.h>
+
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-#include <asm/of_platform.h>
 
 static struct of_device_id walnut_of_bus[] = {
 	{ .compatible = "ibm,plb3", },

arch/powerpc/platforms/44x/bamboo.c

@@ -14,12 +14,13 @@
  * option) any later version.
  */
 #include <linux/init.h>
+#include <linux/of_platform.h>
+
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-#include <asm/of_platform.h>
 #include "44x.h"
 
 static struct of_device_id bamboo_of_bus[] = {

arch/powerpc/platforms/44x/ebony.c

@@ -17,12 +17,13 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_platform.h>
+
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-#include <asm/of_platform.h>
 
 #include "44x.h"
 

arch/powerpc/platforms/44x/sequoia.c

@@ -14,12 +14,13 @@
  * option) any later version.
  */
 #include <linux/init.h>
+#include <linux/of_platform.h>
+
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-#include <asm/of_platform.h>
 #include "44x.h"
 
 static struct of_device_id sequoia_of_bus[] = {

arch/powerpc/platforms/83xx/mpc832x_mds.c

@@ -90,10 +90,11 @@ static void __init mpc832x_sys_setup_arch(void)
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 			!= NULL){
-		/* Reset the Ethernet PHY */
-		bcsr_regs[9] &= ~0x20;
+		/* Reset the Ethernet PHYs */
+#define BCSR8_FETH_RST 0x50
+		bcsr_regs[8] &= ~BCSR8_FETH_RST;
 		udelay(1000);
-		bcsr_regs[9] |= 0x20;
+		bcsr_regs[8] |= BCSR8_FETH_RST;
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
@@ -145,30 +146,6 @@ static void __init mpc832x_sys_init_IRQ(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc832x_rtc_hookup(void)
-{
-	struct timespec tv;
-
-	if (!machine_is(mpc832x_mds))
-		return 0;
-
-	ppc_md.get_rtc_time = ds1374_get_rtc_time;
-	ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = (ppc_md.get_rtc_time) ();
-	do_settimeofday(&tv);
-
-	return 0;
-}
-
-late_initcall(mpc832x_rtc_hookup);
-#endif
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */

arch/powerpc/platforms/83xx/mpc832x_rdb.c

@@ -15,7 +15,10 @@
  */
 
 #include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
 
 #include <asm/of_platform.h>
 #include <asm/time.h>
@@ -46,15 +49,16 @@ static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
 	par_io_data_set(3, 13, !polarity);
 }
 
+static struct mmc_spi_platform_data mpc832x_mmc_pdata = {
+	.ocr_mask = MMC_VDD_33_34,
+};
+
 static struct spi_board_info mpc832x_spi_boardinfo = {
 	.bus_num = 0x4c0,
 	.chip_select = 0,
 	.max_speed_hz = 50000000,
-	/*
-	 * XXX: This is spidev (spi in userspace) stub, should
-	 * be replaced by "mmc_spi" when mmc_spi will hit mainline.
-	 */
-	.modalias = "spidev",
+	.modalias = "mmc_spi",
+	.platform_data = &mpc832x_mmc_pdata,
 };
 
 static int __init mpc832x_spi_init(void)

arch/powerpc/platforms/83xx/mpc834x_mds.c

@@ -106,30 +106,6 @@ static void __init mpc834x_mds_init_IRQ(void)
 	ipic_set_default_priority();
 }
 
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc834x_rtc_hookup(void)
-{
-	struct timespec tv;
-
-	if (!machine_is(mpc834x_mds))
-		return 0;
-
-	ppc_md.get_rtc_time = ds1374_get_rtc_time;
-	ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = (ppc_md.get_rtc_time) ();
-	do_settimeofday(&tv);
-
-	return 0;
-}
-
-late_initcall(mpc834x_rtc_hookup);
-#endif
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */

arch/powerpc/platforms/83xx/mpc836x_mds.c

@@ -96,14 +96,39 @@ static void __init mpc836x_mds_setup_arch(void)
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 			!= NULL){
+		uint svid;
+
 		/* Reset the Ethernet PHY */
-		bcsr_regs[9] &= ~0x20;
+#define BCSR9_GETHRST 0x20
+		clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
 		udelay(1000);
-		bcsr_regs[9] |= 0x20;
+		setbits8(&bcsr_regs[9], BCSR9_GETHRST);
+
+		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+		svid = mfspr(SPRN_SVR);
+		if (svid == 0x80480021) {
+			void __iomem *immap;
+
+			immap = ioremap(get_immrbase() + 0x14a8, 8);
+
+			/*
+			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+			 */
+			setbits32(immap, 0x0c003000);
+
+			/*
+			 * IMMR + 0x14AC[20:27] = 10101010
+			 * (data delay for both UCC's)
+			 */
+			clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+
+			iounmap(immap);
+		}
+
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
-
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
@@ -152,30 +177,6 @@ static void __init mpc836x_mds_init_IRQ(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc8360_rtc_hookup(void)
-{
-	struct timespec tv;
-
-	if (!machine_is(mpc836x_mds))
-		return 0;
-
-	ppc_md.get_rtc_time = ds1374_get_rtc_time;
-	ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = (ppc_md.get_rtc_time) ();
-	do_settimeofday(&tv);
-
-	return 0;
-}
-
-late_initcall(mpc8360_rtc_hookup);
-#endif
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */

arch/powerpc/platforms/83xx/usb.c

@@ -130,7 +130,7 @@ int mpc831x_usb_cfg(void)
 	out_be32(immap + MPC83XX_SCCR_OFFS, temp);
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
-	if (!strcmp(prop, "ulpi")) {
+	if (prop && !strcmp(prop, "ulpi")) {
 		temp = in_be32(immap + MPC83XX_SICRL_OFFS);
 		temp &= ~MPC831X_SICRL_USB_MASK;
 		temp |= MPC831X_SICRL_USB_ULPI;
@@ -153,13 +153,13 @@ int mpc831x_usb_cfg(void)
 	usb_regs = ioremap(res.start, res.end - res.start + 1);
 
 	/* Using on-chip PHY */
-	if (!strcmp(prop, "utmi_wide") ||
-			!strcmp(prop, "utmi")) {
+	if (prop && (!strcmp(prop, "utmi_wide") ||
+		     !strcmp(prop, "utmi"))) {
 		/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
 		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
 				CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
 	/* Using external UPLI PHY */
-	} else if (!strcmp(prop, "ulpi")) {
+	} else if (prop && !strcmp(prop, "ulpi")) {
 		/* Set PHY_CLK_SEL to ULPI */
 		temp = CONTROL_PHY_CLK_SEL_ULPI;
 #ifdef CONFIG_USB_OTG

arch/powerpc/platforms/cell/spufs/inode.c

@@ -171,6 +171,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir)
 {
 	/* remove all entries */
 	spufs_prune_dir(dir);
+	d_drop(dir);
 
 	return simple_rmdir(parent, dir);
 }

arch/powerpc/platforms/embedded6xx/prpmc2800.c

@@ -144,6 +144,7 @@ static int __init prpmc2800_probe(void)
 		strncpy(prpmc2800_platform_name, m,
 			min((int)len, PLATFORM_NAME_MAX - 1));
 
+	_set_L2CR(_get_L2CR() | L2CR_L2E);
 	return 1;
 }
 

arch/powerpc/platforms/pasemi/setup.c

@@ -214,7 +214,7 @@ static __init void pas_init_IRQ(void)
 	printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 
 	mpic = mpic_alloc(mpic_node, openpic_addr,
-			  MPIC_PRIMARY|MPIC_LARGE_VECTORS|MPIC_WANTS_RESET,
+			  MPIC_PRIMARY|MPIC_LARGE_VECTORS,
 			  0, 0, " PAS-OPIC  ");
 	BUG_ON(!mpic);
 

arch/powerpc/platforms/pseries/Kconfig

@@ -21,7 +21,7 @@ config PPC_SPLPAR
 
 config EEH
 	bool "PCI Extended Error Handling (EEH)" if EMBEDDED
-	depends on PPC_PSERIES
+	depends on PPC_PSERIES && PCI
 	default y if !EMBEDDED
 
 config SCANLOG

arch/powerpc/platforms/pseries/setup.c

@@ -507,7 +507,8 @@ define_machine(pseries) {
 	.restart		= rtas_restart,
 	.power_off		= pSeries_power_off,
 	.halt			= rtas_halt,
-	.panic			= rtas_os_term,
+	.panic			= rtas_panic_msg,
+	.machine_shutdown	= rtas_os_term,
 	.get_boot_time		= rtas_get_boot_time,
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,

arch/powerpc/sysdev/uic.c

@@ -97,6 +97,22 @@ static void uic_ack_irq(unsigned int virq)
 	spin_unlock_irqrestore(&uic->lock, flags);
 }
 
+static void uic_mask_ack_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 er, sr;
+
+	sr = 1 << (31-src);
+	spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er &= ~sr;
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	mtdcr(uic->dcrbase + UIC_SR, sr);
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
 static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
 	struct uic *uic = get_irq_chip_data(virq);
@@ -152,7 +168,7 @@ static struct irq_chip uic_irq_chip = {
 	.typename	= " UIC  ",
 	.unmask		= uic_unmask_irq,
 	.mask		= uic_mask_irq,
-/* 	.mask_ack	= uic_mask_irq_and_ack, */
+ 	.mask_ack	= uic_mask_ack_irq,
 	.ack		= uic_ack_irq,
 	.set_type	= uic_set_irq_type,
 };

arch/ppc/kernel/setup.c

@@ -312,7 +312,14 @@ early_init(int r3, int r4, int r5)
 	 * Identify the CPU type and fix up code sections
 	 * that depend on which cpu we have.
 	 */
+#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU)
+	/* We pass the virtual PVR here for 440EP as 440EP and 440GR have
+	 * identical PVRs and there is no reliable way to check for the FPU
+	 */
+	spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8));
+#else
 	spec = identify_cpu(offset, mfspr(SPRN_PVR));
+#endif
 	do_feature_fixups(spec->cpu_features,
 			  PTRRELOC(&__start___ftr_fixup),
 			  PTRRELOC(&__stop___ftr_fixup));

arch/ppc/mm/init.c

@@ -561,7 +561,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 		 * That means the zeroed TLB has to be invalidated
 		 * whenever a page miss occurs.
 		 */
-		_tlbie(address);
+		_tlbie(address, 0 /* 8xx doesn't care about PID */);
 #endif
 		if (!PageReserved(page)
 		    && !test_bit(PG_arch_1, &page->flags)) {

arch/ppc/mm/mmu_decl.h

@@ -49,7 +49,7 @@ extern unsigned int num_tlbcam_entries;
  * architectures.  -- Dan
  */
 #if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
 #define MMU_init_hw()		do { } while(0)
 #define mmu_mapin_ram()		(0UL)
 

arch/ppc/platforms/4xx/yucca.c

@@ -211,6 +211,7 @@ static void __init yucca_setup_pcie_fpga_rootpoint(int port)
 		break;
 
 	default:
+		iounmap(pcie_reg_fpga_base);
 		return;
 	}
 

arch/ppc/syslib/virtex_devices.c

@@ -87,6 +87,29 @@
 	}, \
 }
 
+#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
+	.name = "ml403_ac97cr", \
+	.id = num, \
+	.num_resources = 3, \
+	.resource = (struct resource[]) { \
+		{ \
+			.start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
+			.end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
+			.flags = IORESOURCE_MEM, \
+		}, \
+		{ \
+			.start = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \
+			.end = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \
+			.flags = IORESOURCE_IRQ, \
+		}, \
+		{ \
+			.start = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \
+			.end = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \
+			.flags = IORESOURCE_IRQ, \
+		}, \
+	}, \
+}
+
 /* UART 8250 driver platform data table */
 struct plat_serial8250_port virtex_serial_platform_data[] = {
 #if defined(XPAR_UARTNS550_0_BASEADDR)
@@ -173,6 +196,14 @@ struct platform_device virtex_platform_devices[] = {
 #if defined(XPAR_TFT_3_BASEADDR)
 	XPAR_TFT(3),
 #endif
+
+	/* AC97 Controller Reference instances */
+#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
+	XPAR_AC97_CONTROLLER_REFERENCE(0),
+#endif
+#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
+	XPAR_AC97_CONTROLLER_REFERENCE(1),
+#endif
 };
 
 /* Early serial support functions */

include/asm-powerpc/page_32.h

@@ -6,6 +6,10 @@
 
 #define PPC_MEMSTART	0
 
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#endif
+
 #ifndef __ASSEMBLY__
 /*
  * The basic type of a PTE - 64 bits for those CPUs with > 32 bit

include/asm-powerpc/pci-bridge.h

@@ -246,7 +246,6 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
 	return PCI_DN(busdn)->phb;
 }
 
-extern void pcibios_free_controller(struct pci_controller *phb);
 
 extern void isa_bridge_find_early(struct pci_controller *hose);
 
@@ -282,9 +281,11 @@ extern void
 pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			   struct device_node *dev, int primary);
 
-/* Allocate a new PCI host bridge structure */
+/* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *
 pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
 #ifdef CONFIG_PCI
 extern unsigned long pci_address_to_pio(phys_addr_t address);
 extern int pcibios_vaddr_is_ioport(void __iomem *address);

include/asm-powerpc/rtas.h

@@ -164,7 +164,8 @@ extern int rtas_call(int token, int, int, int *, ...);
 extern void rtas_restart(char *cmd);
 extern void rtas_power_off(void);
 extern void rtas_halt(void);
-extern void rtas_os_term(char *str);
+extern void rtas_panic_msg(char *str);
+extern void rtas_os_term(void);
 extern int rtas_get_sensor(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);

include/asm-powerpc/vdso_datapage.h

@@ -77,6 +77,10 @@ struct vdso_data {
 	/* those additional ones don't have to be located anywhere
 	 * special as they were not part of the original systemcfg
 	 */
+	__u32 dcache_block_size;		/* L1 d-cache block size     */
+	__u32 icache_block_size;		/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;		/* L1 d-cache log block size */
+	__u32 icache_log_block_size;		/* L1 i-cache log block size */
 	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
 	__s32 wtom_clock_nsec;
    	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
@@ -99,6 +103,10 @@ struct vdso_data {
 	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
 	__s32 wtom_clock_nsec;
    	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+	__u32 dcache_block_size;	/* L1 d-cache block size     */
+	__u32 icache_block_size;	/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
+	__u32 icache_log_block_size;	/* L1 i-cache log block size */
 };
 
 #endif /* CONFIG_PPC64 */