net: hns: fix the bug about mtu setting

In chip V1, the maximum mtu value is 9600. But in chip V2, it is 9728.
And it is always configurates as 9600 before this patch.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c

@@ -467,8 +467,10 @@ int hns_mac_set_mtu(struct hns_mac_cb *mac_cb, u32 new_mtu)
 	struct mac_driver *drv = hns_mac_get_drv(mac_cb);
 	u32 buf_size = mac_cb->dsaf_dev->buf_size;
 	u32 new_frm = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+	u32 max_frm = AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver) ?
+			MAC_MAX_MTU : MAC_MAX_MTU_V2;
 
-	if ((new_mtu < MAC_MIN_MTU) || (new_frm > MAC_MAX_MTU) ||
+	if ((new_mtu < MAC_MIN_MTU) || (new_frm > max_frm) ||
 	    (new_frm > HNS_RCB_RING_MAX_BD_PER_PKT * buf_size))
 		return -EINVAL;
 

drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h

@@ -26,6 +26,7 @@ struct dsaf_device;
 
 #define MAC_DEFAULT_MTU	(ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN + ETH_DATA_LEN)
 #define MAC_MAX_MTU		9600
+#define MAC_MAX_MTU_V2		9728
 #define MAC_MIN_MTU		68
 
 #define MAC_DEFAULT_PAUSE_TIME 0xff

drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c

@@ -343,6 +343,9 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb)
 	if (!AE_IS_VER1(dsaf_dev->dsaf_ver)) {
 		hns_ppe_set_vlan_strip(ppe_cb, 0);
 
+		dsaf_write_dev(ppe_cb, PPE_CFG_MAX_FRAME_LEN_REG,
+			       HNS_PPEV2_MAX_FRAME_LEN);
+
 		/* set default RSS key in h/w */
 		hns_ppe_set_rss_key(ppe_cb, ppe_cb->rss_key);
 

drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.h

@@ -30,6 +30,8 @@
 #define HNS_PPEV2_RSS_KEY_SIZE 40 /* in bytes or 320 bits */
 #define HNS_PPEV2_RSS_KEY_NUM (HNS_PPEV2_RSS_KEY_SIZE / sizeof(u32))
 
+#define HNS_PPEV2_MAX_FRAME_LEN 0X980
+
 enum ppe_qid_mode {
 	PPE_QID_MODE0 = 0, /* fixed queue id mode */
 	PPE_QID_MODE1,	   /* switch:128VM non switch:6Port/4VM/4TC */