提交 d9388c84 编写于 作者: A Alexander Stein 提交者: Shawn Guo

clk: imx31: Do not call mxc_timer_init twice when booting with DT

mxc_timer_init must not be called from within mx31_clocks_init_dt. It will
eventually be called by imx31_timer_init_dt
(drivers/clocksource/timer-imx-gpt.c).
This arranges the initialization code similar to clk-imx27.c
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
上级 1b9af68f
......@@ -72,7 +72,7 @@ static struct clk ** const uart_clks[] __initconst = {
NULL
};
int __init mx31_clocks_init(unsigned long fref)
static void __init _mx31_clocks_init(unsigned long fref)
{
void __iomem *base;
struct device_node *np;
......@@ -142,6 +142,12 @@ int __init mx31_clocks_init(unsigned long fref)
imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_set_parent(clk[csi], clk[upll]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[iim_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
if (np) {
......@@ -149,6 +155,13 @@ int __init mx31_clocks_init(unsigned long fref)
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
}
int __init mx31_clocks_init(void)
{
u32 fref = 26000000; /* default */
_mx31_clocks_init(fref);
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
......@@ -204,14 +217,8 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
clk_set_parent(clk[csi], clk[upll]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[iim_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
imx_register_uart_clocks(uart_clks);
mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
return 0;
......@@ -230,5 +237,7 @@ int __init mx31_clocks_init_dt(void)
break;
}
return mx31_clocks_init(fref);
_mx31_clocks_init(fref);
return 0;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册