Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 d9357136 编写于 作者: A Adrian Bunk 提交者： John W. Linville
浏览文件
操作

the scheduled rc80211-simple.c removal 

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 7524d7d6
隐藏空白更改
内联 并排
Showing with 1 addition and 448 deletion
Documentation/feature-removal-schedule.txt
浏览文件 @ d9357136
......@@ -230,16 +230,6 @@ Who: Jean Delvare <khali@linux-fr.org>
---------------------------
What: rc80211-simple rate control algorithm for mac80211
When: 2.6.26
Files: net/mac80211/rc80211-simple.c
Why: This algorithm was provided for reference but always exhibited bad
responsiveness and performance and has some serious flaws. It has been
replaced by rc80211-pid.
Who: Stefano Brivio <stefano.brivio@polimi.it>
---------------------------
What (Why):
- include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
(superseded by xt_TOS/xt_tos target & match)
......
net/mac80211/Kconfig
浏览文件 @ d9357136
......@@ -32,15 +32,6 @@ config MAC80211_RC_DEFAULT_PID
default rate control algorithm. You should choose
this unless you know what you are doing.
config MAC80211_RC_DEFAULT_SIMPLE
bool "Simple rate control algorithm"
select MAC80211_RC_SIMPLE
---help---
Select the simple rate control as the default rate
control algorithm. Note that this is a non-responsive,
dumb algorithm. You should choose the PID rate control
instead.
config MAC80211_RC_DEFAULT_NONE
bool "No default algorithm"
depends on EMBEDDED
......@@ -57,7 +48,6 @@ comment "build the algorithm into mac80211."
config MAC80211_RC_DEFAULT
string
default "pid" if MAC80211_RC_DEFAULT_PID
default "simple" if MAC80211_RC_DEFAULT_SIMPLE
default ""
config MAC80211_RC_PID
......@@ -70,15 +60,6 @@ config MAC80211_RC_PID
Say Y or M unless you're sure you want to use a
different rate control algorithm.
config MAC80211_RC_SIMPLE
tristate "Simple rate control algorithm (DEPRECATED)"
---help---
This option enables a very simple, non-responsive TX
rate control algorithm. This algorithm is deprecated
and will be removed from the kernel in the near future.
It has been replaced by the PID algorithm.
Say N unless you know what you are doing.
endmenu
config MAC80211_MESH
......
net/mac80211/Makefile
浏览文件 @ d9357136
......@@ -44,9 +44,7 @@ mac80211-$(CONFIG_MAC80211_MESH) += \
# Build rate control algorithm(s)
CFLAGS_rc80211_simple.o += -DRC80211_SIMPLE_COMPILE
CFLAGS_rc80211_pid_algo.o += -DRC80211_PID_COMPILE
mac80211-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o
mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc-pid-$(CONFIG_MAC80211_RC_PID))
# Modular rate algorithms are assigned to mac80211-m - make separate modules
......
net/mac80211/ieee80211.c
浏览文件 @ d9357136
......@@ -1803,13 +1803,9 @@ static int __init ieee80211_init(void)
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
ret = rc80211_simple_init();
if (ret)
goto out;
ret = rc80211_pid_init();
if (ret)
goto out_cleanup_simple;
goto out;
ret = ieee80211_wme_register();
if (ret) {
......@@ -1824,15 +1820,12 @@ static int __init ieee80211_init(void)
out_cleanup_pid:
rc80211_pid_exit();
out_cleanup_simple:
rc80211_simple_exit();
out:
return ret;
}
static void __exit ieee80211_exit(void)
{
rc80211_simple_exit();
rc80211_pid_exit();
if (mesh_allocated)
......
net/mac80211/ieee80211_rate.h
浏览文件 @ d9357136
......@@ -171,21 +171,6 @@ void rate_control_deinitialize(struct ieee80211_local *local);
/* Rate control algorithms */
#if defined(RC80211_SIMPLE_COMPILE) || \
(defined(CONFIG_MAC80211_RC_SIMPLE) && \
!defined(CONFIG_MAC80211_RC_SIMPLE_MODULE))
extern int rc80211_simple_init(void);
extern void rc80211_simple_exit(void);
#else
static inline int rc80211_simple_init(void)
{
return 0;
}
static inline void rc80211_simple_exit(void)
{
}
#endif
#if defined(RC80211_PID_COMPILE) || \
(defined(CONFIG_MAC80211_RC_PID) && \
!defined(CONFIG_MAC80211_RC_PID_MODULE))
......
net/mac80211/rc80211_simple.c 已删除 100644 → 0
浏览文件 @ 7524d7d6
/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/compiler.h>
#include <linux/module.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "ieee80211_rate.h"
#include "debugfs.h"
/* This is a minimal implementation of TX rate controlling that can be used
* as the default when no improved mechanisms are available. */
#define RATE_CONTROL_NUM_DOWN 20
#define RATE_CONTROL_NUM_UP 15
#define RATE_CONTROL_EMERG_DEC 2
#define RATE_CONTROL_INTERVAL (HZ / 20)
#define RATE_CONTROL_MIN_TX 10
static void rate_control_rate_inc(struct ieee80211_local *local,
struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
int i = sta->txrate_idx;
int maxrate;
sdata = sta->sdata;
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
/* forced unicast rate - do not change STA rate */
return;
}
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
if (i > sband->n_bitrates)
i = sband->n_bitrates - 2;
while (i + 1 < sband->n_bitrates) {
i++;
if (rate_supported(sta, sband->band, i) &&
(maxrate < 0 || i <= maxrate)) {
sta->txrate_idx = i;
break;
}
}
}
static void rate_control_rate_dec(struct ieee80211_local *local,
struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
int i = sta->txrate_idx;
sdata = sta->sdata;
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
/* forced unicast rate - do not change STA rate */
return;
}
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
if (i > sband->n_bitrates)
i = sband->n_bitrates;
while (i > 0) {
i--;
if (rate_supported(sta, sband->band, i)) {
sta->txrate_idx = i;
break;
}
}
}
struct global_rate_control {
int dummy;
};
struct sta_rate_control {
unsigned long last_rate_change;
u32 tx_num_failures;
u32 tx_num_xmit;
unsigned long avg_rate_update;
u32 tx_avg_rate_sum;
u32 tx_avg_rate_num;
#ifdef CONFIG_MAC80211_DEBUGFS
struct dentry *tx_avg_rate_sum_dentry;
struct dentry *tx_avg_rate_num_dentry;
#endif
};
static void rate_control_simple_tx_status(void *priv, struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct sta_info *sta;
struct sta_rate_control *srctrl;
rcu_read_lock();
sta = sta_info_get(local, hdr->addr1);
if (!sta)
goto unlock;
srctrl = sta->rate_ctrl_priv;
srctrl->tx_num_xmit++;
if (status->excessive_retries) {
srctrl->tx_num_failures++;
sta->tx_retry_failed++;
sta->tx_num_consecutive_failures++;
sta->tx_num_mpdu_fail++;
} else {
sta->tx_num_consecutive_failures = 0;
sta->tx_num_mpdu_ok++;
}
sta->tx_retry_count += status->retry_count;
sta->tx_num_mpdu_fail += status->retry_count;
if (time_after(jiffies,
srctrl->last_rate_change + RATE_CONTROL_INTERVAL) &&
srctrl->tx_num_xmit > RATE_CONTROL_MIN_TX) {
u32 per_failed;
srctrl->last_rate_change = jiffies;
per_failed = (100 * sta->tx_num_mpdu_fail) /
(sta->tx_num_mpdu_fail + sta->tx_num_mpdu_ok);
/* TODO: calculate average per_failed to make adjusting
* parameters easier */
#if 0
if (net_ratelimit()) {
printk(KERN_DEBUG "MPDU fail=%d ok=%d per_failed=%d\n",
sta->tx_num_mpdu_fail, sta->tx_num_mpdu_ok,
per_failed);
}
#endif
/*
* XXX: Make these configurable once we have an
* interface to the rate control algorithms
*/
if (per_failed > RATE_CONTROL_NUM_DOWN) {
rate_control_rate_dec(local, sta);
} else if (per_failed < RATE_CONTROL_NUM_UP) {
rate_control_rate_inc(local, sta);
}
srctrl->tx_avg_rate_sum += status->control.tx_rate->bitrate;
srctrl->tx_avg_rate_num++;
srctrl->tx_num_failures = 0;
srctrl->tx_num_xmit = 0;
} else if (sta->tx_num_consecutive_failures >=
RATE_CONTROL_EMERG_DEC) {
rate_control_rate_dec(local, sta);
}
if (time_after(jiffies, srctrl->avg_rate_update + 60 * HZ)) {
srctrl->avg_rate_update = jiffies;
if (srctrl->tx_avg_rate_num > 0) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: STA %s Average rate: "
"%d (%d/%d)\n",
dev->name, print_mac(mac, sta->addr),
srctrl->tx_avg_rate_sum /
srctrl->tx_avg_rate_num,
srctrl->tx_avg_rate_sum,
srctrl->tx_avg_rate_num);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
srctrl->tx_avg_rate_sum = 0;
srctrl->tx_avg_rate_num = 0;
}
}
unlock:
rcu_read_unlock();
}
static void
rate_control_simple_get_rate(void *priv, struct net_device *dev,
struct ieee80211_supported_band *sband,
struct sk_buff *skb,
struct rate_selection *sel)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int rateidx;
u16 fc;
rcu_read_lock();
sta = sta_info_get(local, hdr->addr1);
/* Send management frames and broadcast/multicast data using lowest
* rate. */
fc = le16_to_cpu(hdr->frame_control);
if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
is_multicast_ether_addr(hdr->addr1) || !sta) {
sel->rate = rate_lowest(local, sband, sta);
rcu_read_unlock();
return;
}
/* If a forced rate is in effect, select it. */
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
sta->txrate_idx = sdata->bss->force_unicast_rateidx;
rateidx = sta->txrate_idx;
if (rateidx >= sband->n_bitrates)
rateidx = sband->n_bitrates - 1;
sta->last_txrate_idx = rateidx;
rcu_read_unlock();
sel->rate = &sband->bitrates[rateidx];
}
static void rate_control_simple_rate_init(void *priv, void *priv_sta,
struct ieee80211_local *local,
struct sta_info *sta)
{
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
/* TODO: This routine should consider using RSSI from previous packets
* as we need to have IEEE 802.1X auth succeed immediately after assoc..
* Until that method is implemented, we will use the lowest supported rate
* as a workaround, */
sta->txrate_idx = rate_lowest_index(local, sband, sta);
}
static void * rate_control_simple_alloc(struct ieee80211_local *local)
{
struct global_rate_control *rctrl;
rctrl = kzalloc(sizeof(*rctrl), GFP_ATOMIC);
return rctrl;
}
static void rate_control_simple_free(void *priv)
{
struct global_rate_control *rctrl = priv;
kfree(rctrl);
}
static void rate_control_simple_clear(void *priv)
{
}
static void * rate_control_simple_alloc_sta(void *priv, gfp_t gfp)
{
struct sta_rate_control *rctrl;
rctrl = kzalloc(sizeof(*rctrl), gfp);
return rctrl;
}
static void rate_control_simple_free_sta(void *priv, void *priv_sta)
{
struct sta_rate_control *rctrl = priv_sta;
kfree(rctrl);
}
#ifdef CONFIG_MAC80211_DEBUGFS
static int open_file_generic(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return 0;
}
static ssize_t sta_tx_avg_rate_sum_read(struct file *file,
char __user *userbuf,
size_t count, loff_t *ppos)
{
struct sta_rate_control *srctrl = file->private_data;
char buf[20];
sprintf(buf, "%d\n", srctrl->tx_avg_rate_sum);
return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
}
static const struct file_operations sta_tx_avg_rate_sum_ops = {
.read = sta_tx_avg_rate_sum_read,
.open = open_file_generic,
};
static ssize_t sta_tx_avg_rate_num_read(struct file *file,
char __user *userbuf,
size_t count, loff_t *ppos)
{
struct sta_rate_control *srctrl = file->private_data;
char buf[20];
sprintf(buf, "%d\n", srctrl->tx_avg_rate_num);
return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
}
static const struct file_operations sta_tx_avg_rate_num_ops = {
.read = sta_tx_avg_rate_num_read,
.open = open_file_generic,
};
static void rate_control_simple_add_sta_debugfs(void *priv, void *priv_sta,
struct dentry *dir)
{
struct sta_rate_control *srctrl = priv_sta;
srctrl->tx_avg_rate_num_dentry =
debugfs_create_file("rc_simple_sta_tx_avg_rate_num", 0400,
dir, srctrl, &sta_tx_avg_rate_num_ops);
srctrl->tx_avg_rate_sum_dentry =
debugfs_create_file("rc_simple_sta_tx_avg_rate_sum", 0400,
dir, srctrl, &sta_tx_avg_rate_sum_ops);
}
static void rate_control_simple_remove_sta_debugfs(void *priv, void *priv_sta)
{
struct sta_rate_control *srctrl = priv_sta;
debugfs_remove(srctrl->tx_avg_rate_sum_dentry);
debugfs_remove(srctrl->tx_avg_rate_num_dentry);
}
#endif
static struct rate_control_ops mac80211_rcsimple = {
.name = "simple",
.tx_status = rate_control_simple_tx_status,
.get_rate = rate_control_simple_get_rate,
.rate_init = rate_control_simple_rate_init,
.clear = rate_control_simple_clear,
.alloc = rate_control_simple_alloc,
.free = rate_control_simple_free,
.alloc_sta = rate_control_simple_alloc_sta,
.free_sta = rate_control_simple_free_sta,
#ifdef CONFIG_MAC80211_DEBUGFS
.add_sta_debugfs = rate_control_simple_add_sta_debugfs,
.remove_sta_debugfs = rate_control_simple_remove_sta_debugfs,
#endif
};
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Simple rate control algorithm");
int __init rc80211_simple_init(void)
{
return ieee80211_rate_control_register(&mac80211_rcsimple);
}
void rc80211_simple_exit(void)
{
ieee80211_rate_control_unregister(&mac80211_rcsimple);
}
#ifdef CONFIG_MAC80211_RC_SIMPLE_MODULE
module_init(rc80211_simple_init);
module_exit(rc80211_simple_exit);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或