crypto: marvell - add support for OCTEON TX CPT engine

Add support for the cryptographic acceleration unit (CPT) on
OcteonTX CN83XX SoC.
Co-developed-by: NLukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: NLukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: NSrujanaChalla <schalla@marvell.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS

@@ -10018,6 +10018,7 @@ F:	Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 MARVELL CRYPTO DRIVER
 M:	Boris Brezillon <bbrezillon@kernel.org>
 M:	Arnaud Ebalard <arno@natisbad.org>
+M:	Srujana Challa <schalla@marvell.com>
 F:	drivers/crypto/marvell/
 S:	Maintained
 L:	linux-crypto@vger.kernel.org

drivers/crypto/marvell/octeontx/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CRYPTO_DEV_OCTEONTX_CPT) += octeontx-cpt.o
+
+octeontx-cpt-objs := otx_cptpf_main.o otx_cptpf_mbox.o otx_cptpf_ucode.o

drivers/crypto/marvell/octeontx/otx_cpt_common.h

+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OTX_CPT_COMMON_H
+#define __OTX_CPT_COMMON_H
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+
+#define OTX_CPT_MAX_MBOX_DATA_STR_SIZE 64
+
+enum otx_cptpf_type {
+	OTX_CPT_AE = 2,
+	OTX_CPT_SE = 3,
+	BAD_OTX_CPTPF_TYPE,
+};
+
+enum otx_cptvf_type {
+	OTX_CPT_AE_TYPES = 1,
+	OTX_CPT_SE_TYPES = 2,
+	BAD_OTX_CPTVF_TYPE,
+};
+
+/* VF-PF message opcodes */
+enum otx_cpt_mbox_opcode {
+	OTX_CPT_MSG_VF_UP = 1,
+	OTX_CPT_MSG_VF_DOWN,
+	OTX_CPT_MSG_READY,
+	OTX_CPT_MSG_QLEN,
+	OTX_CPT_MSG_QBIND_GRP,
+	OTX_CPT_MSG_VQ_PRIORITY,
+	OTX_CPT_MSG_PF_TYPE,
+	OTX_CPT_MSG_ACK,
+	OTX_CPT_MSG_NACK
+};
+
+/* OcteonTX CPT mailbox structure */
+struct otx_cpt_mbox {
+	u64 msg; /* Message type MBOX[0] */
+	u64 data;/* Data         MBOX[1] */
+};
+
+#endif /* __OTX_CPT_COMMON_H */

drivers/crypto/marvell/octeontx/otx_cpt_hw_types.h

+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OTX_CPT_HW_TYPES_H
+#define __OTX_CPT_HW_TYPES_H
+
+#include <linux/types.h>
+
+/* Device IDs */
+#define OTX_CPT_PCI_PF_DEVICE_ID 0xa040
+
+#define OTX_CPT_PCI_PF_SUBSYS_ID 0xa340
+
+/* Configuration and status registers are in BAR0 on OcteonTX platform */
+#define OTX_CPT_PF_PCI_CFG_BAR	0
+/* Mailbox interrupts offset */
+#define OTX_CPT_PF_MBOX_INT	3
+#define OTX_CPT_PF_INT_VEC_E_MBOXX(x, a) ((x) + (a))
+/* Number of MSIX supported in PF */
+#define OTX_CPT_PF_MSIX_VECTORS 4
+/* Maximum supported microcode groups */
+#define OTX_CPT_MAX_ENGINE_GROUPS 8
+
+/* OcteonTX CPT PF registers */
+#define OTX_CPT_PF_CONSTANTS		(0x0ll)
+#define OTX_CPT_PF_RESET		(0x100ll)
+#define OTX_CPT_PF_DIAG			(0x120ll)
+#define OTX_CPT_PF_BIST_STATUS		(0x160ll)
+#define OTX_CPT_PF_ECC0_CTL		(0x200ll)
+#define OTX_CPT_PF_ECC0_FLIP		(0x210ll)
+#define OTX_CPT_PF_ECC0_INT		(0x220ll)
+#define OTX_CPT_PF_ECC0_INT_W1S		(0x230ll)
+#define OTX_CPT_PF_ECC0_ENA_W1S		(0x240ll)
+#define OTX_CPT_PF_ECC0_ENA_W1C		(0x250ll)
+#define OTX_CPT_PF_MBOX_INTX(b)		(0x400ll | (u64)(b) << 3)
+#define OTX_CPT_PF_MBOX_INT_W1SX(b)	(0x420ll | (u64)(b) << 3)
+#define OTX_CPT_PF_MBOX_ENA_W1CX(b)	(0x440ll | (u64)(b) << 3)
+#define OTX_CPT_PF_MBOX_ENA_W1SX(b)	(0x460ll | (u64)(b) << 3)
+#define OTX_CPT_PF_EXEC_INT		(0x500ll)
+#define OTX_CPT_PF_EXEC_INT_W1S		(0x520ll)
+#define OTX_CPT_PF_EXEC_ENA_W1C		(0x540ll)
+#define OTX_CPT_PF_EXEC_ENA_W1S		(0x560ll)
+#define OTX_CPT_PF_GX_EN(b)		(0x600ll | (u64)(b) << 3)
+#define OTX_CPT_PF_EXEC_INFO		(0x700ll)
+#define OTX_CPT_PF_EXEC_BUSY		(0x800ll)
+#define OTX_CPT_PF_EXEC_INFO0		(0x900ll)
+#define OTX_CPT_PF_EXEC_INFO1		(0x910ll)
+#define OTX_CPT_PF_INST_REQ_PC		(0x10000ll)
+#define OTX_CPT_PF_INST_LATENCY_PC	(0x10020ll)
+#define OTX_CPT_PF_RD_REQ_PC		(0x10040ll)
+#define OTX_CPT_PF_RD_LATENCY_PC	(0x10060ll)
+#define OTX_CPT_PF_RD_UC_PC		(0x10080ll)
+#define OTX_CPT_PF_ACTIVE_CYCLES_PC	(0x10100ll)
+#define OTX_CPT_PF_EXE_CTL		(0x4000000ll)
+#define OTX_CPT_PF_EXE_STATUS		(0x4000008ll)
+#define OTX_CPT_PF_EXE_CLK		(0x4000010ll)
+#define OTX_CPT_PF_EXE_DBG_CTL		(0x4000018ll)
+#define OTX_CPT_PF_EXE_DBG_DATA		(0x4000020ll)
+#define OTX_CPT_PF_EXE_BIST_STATUS	(0x4000028ll)
+#define OTX_CPT_PF_EXE_REQ_TIMER	(0x4000030ll)
+#define OTX_CPT_PF_EXE_MEM_CTL		(0x4000038ll)
+#define OTX_CPT_PF_EXE_PERF_CTL		(0x4001000ll)
+#define OTX_CPT_PF_EXE_DBG_CNTX(b)	(0x4001100ll | (u64)(b) << 3)
+#define OTX_CPT_PF_EXE_PERF_EVENT_CNT	(0x4001180ll)
+#define OTX_CPT_PF_EXE_EPCI_INBX_CNT(b)	(0x4001200ll | (u64)(b) << 3)
+#define OTX_CPT_PF_EXE_EPCI_OUTBX_CNT(b) (0x4001240ll | (u64)(b) << 3)
+#define OTX_CPT_PF_ENGX_UCODE_BASE(b)	(0x4002000ll | (u64)(b) << 3)
+#define OTX_CPT_PF_QX_CTL(b)		(0x8000000ll | (u64)(b) << 20)
+#define OTX_CPT_PF_QX_GMCTL(b)		(0x8000020ll | (u64)(b) << 20)
+#define OTX_CPT_PF_QX_CTL2(b)		(0x8000100ll | (u64)(b) << 20)
+#define OTX_CPT_PF_VFX_MBOXX(b, c)	(0x8001000ll | (u64)(b) << 20 | \
+					 (u64)(c) << 8)
+
+/*
+ * Register (NCB) otx_cpt#_pf_bist_status
+ *
+ * CPT PF Control Bist Status Register
+ * This register has the BIST status of memories. Each bit is the BIST result
+ * of an individual memory (per bit, 0 = pass and 1 = fail).
+ * otx_cptx_pf_bist_status_s
+ * Word0
+ *  bstatus [29:0](RO/H) BIST status. One bit per memory, enumerated by
+ *	CPT_RAMS_E.
+ */
+union otx_cptx_pf_bist_status {
+	u64 u;
+	struct otx_cptx_pf_bist_status_s {
+#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */
+		u64 reserved_30_63:34;
+		u64 bstatus:30;
+#else /* Word 0 - Little Endian */
+		u64 bstatus:30;
+		u64 reserved_30_63:34;
+#endif /* Word 0 - End */
+	} s;
+};
+
+/*
+ * Register (NCB) otx_cpt#_pf_constants
+ *
+ * CPT PF Constants Register
+ * This register contains implementation-related parameters of CPT in CNXXXX.
+ * otx_cptx_pf_constants_s
+ * Word 0
+ *  reserved_40_63:24 [63:40] Reserved.
+ *  epcis:8 [39:32](RO) Number of EPCI busses.
+ *  grps:8 [31:24](RO) Number of engine groups implemented.
+ *  ae:8 [23:16](RO/H) Number of AEs. In CNXXXX, for CPT0 returns 0x0,
+ *	for CPT1 returns 0x18, or less if there are fuse-disables.
+ *  se:8 [15:8](RO/H) Number of SEs. In CNXXXX, for CPT0 returns 0x30,
+ *	or less if there are fuse-disables, for CPT1 returns 0x0.
+ *  vq:8 [7:0](RO) Number of VQs.
+ */
+union otx_cptx_pf_constants {
+	u64 u;
+	struct otx_cptx_pf_constants_s {
+#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */
+		u64 reserved_40_63:24;
+		u64 epcis:8;
+		u64 grps:8;
+		u64 ae:8;
+		u64 se:8;
+		u64 vq:8;
+#else /* Word 0 - Little Endian */
+		u64 vq:8;
+		u64 se:8;
+		u64 ae:8;
+		u64 grps:8;
+		u64 epcis:8;
+		u64 reserved_40_63:24;
+#endif /* Word 0 - End */
+	} s;
+};
+
+/*
+ * Register (NCB) otx_cpt#_pf_exe_bist_status
+ *
+ * CPT PF Engine Bist Status Register
+ * This register has the BIST status of each engine.  Each bit is the
+ * BIST result of an individual engine (per bit, 0 = pass and 1 = fail).
+ * otx_cptx_pf_exe_bist_status_s
+ * Word0
+ *  reserved_48_63:16 [63:48] reserved
+ *  bstatus:48 [47:0](RO/H) BIST status. One bit per engine.
+ *
+ */
+union otx_cptx_pf_exe_bist_status {
+	u64 u;
+	struct otx_cptx_pf_exe_bist_status_s {
+#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */
+		u64 reserved_48_63:16;
+		u64 bstatus:48;
+#else /* Word 0 - Little Endian */
+		u64 bstatus:48;
+		u64 reserved_48_63:16;
+#endif /* Word 0 - End */
+	} s;
+};
+
+/*
+ * Register (NCB) otx_cpt#_pf_q#_ctl
+ *
+ * CPT Queue Control Register
+ * This register configures queues. This register should be changed only
+ * when quiescent (see CPT()_VQ()_INPROG[INFLIGHT]).
+ * otx_cptx_pf_qx_ctl_s
+ * Word0
+ *  reserved_60_63:4 [63:60] reserved.
+ *  aura:12; [59:48](R/W) Guest-aura for returning this queue's
+ *	instruction-chunk buffers to FPA. Only used when [INST_FREE] is set.
+ *	For the FPA to not discard the request, FPA_PF_MAP() must map
+ *	[AURA] and CPT()_PF_Q()_GMCTL[GMID] as valid.
+ *  reserved_45_47:3 [47:45] reserved.
+ *  size:13 [44:32](R/W) Command-buffer size, in number of 64-bit words per
+ *	command buffer segment. Must be 8*n + 1, where n is the number of
+ *	instructions per buffer segment.
+ *  reserved_11_31:21 [31:11] Reserved.
+ *  cont_err:1 [10:10](R/W) Continue on error.
+ *	0 = When CPT()_VQ()_MISC_INT[NWRP], CPT()_VQ()_MISC_INT[IRDE] or
+ *	CPT()_VQ()_MISC_INT[DOVF] are set by hardware or software via
+ *	CPT()_VQ()_MISC_INT_W1S, then CPT()_VQ()_CTL[ENA] is cleared.  Due to
+ *	pipelining, additional instructions may have been processed between the
+ *	instruction causing the error and the next instruction in the disabled
+ *	queue (the instruction at CPT()_VQ()_SADDR).
+ *	1 = Ignore errors and continue processing instructions.
+ *	For diagnostic use only.
+ *  inst_free:1 [9:9](R/W) Instruction FPA free. When set, when CPT reaches the
+ *	end of an instruction chunk, that chunk will be freed to the FPA.
+ *  inst_be:1 [8:8](R/W) Instruction big-endian control. When set, instructions,
+ *	instruction next chunk pointers, and result structures are stored in
+ *	big-endian format in memory.
+ *  iqb_ldwb:1 [7:7](R/W) Instruction load don't write back.
+ *	0 = The hardware issues NCB transient load (LDT) towards the cache,
+ *	which if the line hits and is is dirty will cause the line to be
+ *	written back before being replaced.
+ *	1 = The hardware issues NCB LDWB read-and-invalidate command towards
+ *	the cache when fetching the last word of instructions; as a result the
+ *	line will not be written back when replaced.  This improves
+ *	performance, but software must not read the instructions after they are
+ *	posted to the hardware.	Reads that do not consume the last word of a
+ *	cache line always use LDI.
+ *  reserved_4_6:3 [6:4] Reserved.
+ *  grp:3; [3:1](R/W) Engine group.
+ *  pri:1; [0:0](R/W) Queue priority.
+ *	1 = This queue has higher priority. Round-robin between higher
+ *	priority queues.
+ *	0 = This queue has lower priority. Round-robin between lower
+ *	priority queues.
+ */
+union otx_cptx_pf_qx_ctl {
+	u64 u;
+	struct otx_cptx_pf_qx_ctl_s {
+#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */
+		u64 reserved_60_63:4;
+		u64 aura:12;
+		u64 reserved_45_47:3;
+		u64 size:13;
+		u64 reserved_11_31:21;
+		u64 cont_err:1;
+		u64 inst_free:1;
+		u64 inst_be:1;
+		u64 iqb_ldwb:1;
+		u64 reserved_4_6:3;
+		u64 grp:3;
+		u64 pri:1;
+#else /* Word 0 - Little Endian */
+		u64 pri:1;
+		u64 grp:3;
+		u64 reserved_4_6:3;
+		u64 iqb_ldwb:1;
+		u64 inst_be:1;
+		u64 inst_free:1;
+		u64 cont_err:1;
+		u64 reserved_11_31:21;
+		u64 size:13;
+		u64 reserved_45_47:3;
+		u64 aura:12;
+		u64 reserved_60_63:4;
+#endif /* Word 0 - End */
+	} s;
+};
+#endif /* __OTX_CPT_HW_TYPES_H */

drivers/crypto/marvell/octeontx/otx_cptpf.h

+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OTX_CPTPF_H
+#define __OTX_CPTPF_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include "otx_cptpf_ucode.h"
+
+/*
+ * OcteonTX CPT device structure
+ */
+struct otx_cpt_device {
+	void __iomem *reg_base; /* Register start address */
+	struct pci_dev *pdev;	/* Pci device handle */
+	struct otx_cpt_eng_grps eng_grps;/* Engine groups information */
+	struct list_head list;
+	u8 pf_type;	/* PF type SE or AE */
+	u8 max_vfs;	/* Maximum number of VFs supported by the CPT */
+	u8 vfs_enabled;	/* Number of enabled VFs */
+};
+
+void otx_cpt_mbox_intr_handler(struct otx_cpt_device *cpt, int mbx);
+void otx_cpt_disable_all_cores(struct otx_cpt_device *cpt);
+
+#endif /* __OTX_CPTPF_H */

drivers/crypto/marvell/octeontx/otx_cptpf_main.c

+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "otx_cpt_common.h"
+#include "otx_cptpf.h"
+
+#define DRV_NAME	"octeontx-cpt"
+#define DRV_VERSION	"1.0"
+
+static void otx_cpt_disable_mbox_interrupts(struct otx_cpt_device *cpt)
+{
+	/* Disable mbox(0) interrupts for all VFs */
+	writeq(~0ull, cpt->reg_base + OTX_CPT_PF_MBOX_ENA_W1CX(0));
+}
+
+static void otx_cpt_enable_mbox_interrupts(struct otx_cpt_device *cpt)
+{
+	/* Enable mbox(0) interrupts for all VFs */
+	writeq(~0ull, cpt->reg_base + OTX_CPT_PF_MBOX_ENA_W1SX(0));
+}
+
+static irqreturn_t otx_cpt_mbx0_intr_handler(int __always_unused irq,
+					     void *cpt)
+{
+	otx_cpt_mbox_intr_handler(cpt, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void otx_cpt_reset(struct otx_cpt_device *cpt)
+{
+	writeq(1, cpt->reg_base + OTX_CPT_PF_RESET);
+}
+
+static void otx_cpt_find_max_enabled_cores(struct otx_cpt_device *cpt)
+{
+	union otx_cptx_pf_constants pf_cnsts = {0};
+
+	pf_cnsts.u = readq(cpt->reg_base + OTX_CPT_PF_CONSTANTS);
+	cpt->eng_grps.avail.max_se_cnt = pf_cnsts.s.se;
+	cpt->eng_grps.avail.max_ae_cnt = pf_cnsts.s.ae;
+}
+
+static u32 otx_cpt_check_bist_status(struct otx_cpt_device *cpt)
+{
+	union otx_cptx_pf_bist_status bist_sts = {0};
+
+	bist_sts.u = readq(cpt->reg_base + OTX_CPT_PF_BIST_STATUS);
+	return bist_sts.u;
+}
+
+static u64 otx_cpt_check_exe_bist_status(struct otx_cpt_device *cpt)
+{
+	union otx_cptx_pf_exe_bist_status bist_sts = {0};
+
+	bist_sts.u = readq(cpt->reg_base + OTX_CPT_PF_EXE_BIST_STATUS);
+	return bist_sts.u;
+}
+
+static int otx_cpt_device_init(struct otx_cpt_device *cpt)
+{
+	struct device *dev = &cpt->pdev->dev;
+	u16 sdevid;
+	u64 bist;
+
+	/* Reset the PF when probed first */
+	otx_cpt_reset(cpt);
+	mdelay(100);
+
+	pci_read_config_word(cpt->pdev, PCI_SUBSYSTEM_ID, &sdevid);
+
+	/* Check BIST status */
+	bist = (u64)otx_cpt_check_bist_status(cpt);
+	if (bist) {
+		dev_err(dev, "RAM BIST failed with code 0x%llx", bist);
+		return -ENODEV;
+	}
+
+	bist = otx_cpt_check_exe_bist_status(cpt);
+	if (bist) {
+		dev_err(dev, "Engine BIST failed with code 0x%llx", bist);
+		return -ENODEV;
+	}
+
+	/* Get max enabled cores */
+	otx_cpt_find_max_enabled_cores(cpt);
+
+	if ((sdevid == OTX_CPT_PCI_PF_SUBSYS_ID) &&
+	    (cpt->eng_grps.avail.max_se_cnt == 0)) {
+		cpt->pf_type = OTX_CPT_AE;
+	} else if ((sdevid == OTX_CPT_PCI_PF_SUBSYS_ID) &&
+		   (cpt->eng_grps.avail.max_ae_cnt == 0)) {
+		cpt->pf_type = OTX_CPT_SE;
+	}
+
+	/* Get max VQs/VFs supported by the device */
+	cpt->max_vfs = pci_sriov_get_totalvfs(cpt->pdev);
+
+	/* Disable all cores */
+	otx_cpt_disable_all_cores(cpt);
+
+	return 0;
+}
+
+static int otx_cpt_register_interrupts(struct otx_cpt_device *cpt)
+{
+	struct device *dev = &cpt->pdev->dev;
+	u32 mbox_int_idx = OTX_CPT_PF_MBOX_INT;
+	u32 num_vec = OTX_CPT_PF_MSIX_VECTORS;
+	int ret;
+
+	/* Enable MSI-X */
+	ret = pci_alloc_irq_vectors(cpt->pdev, num_vec, num_vec, PCI_IRQ_MSIX);
+	if (ret < 0) {
+		dev_err(&cpt->pdev->dev,
+			"Request for #%d msix vectors failed\n",
+			num_vec);
+		return ret;
+	}
+
+	/* Register mailbox interrupt handlers */
+	ret = request_irq(pci_irq_vector(cpt->pdev,
+				OTX_CPT_PF_INT_VEC_E_MBOXX(mbox_int_idx, 0)),
+				otx_cpt_mbx0_intr_handler, 0, "CPT Mbox0", cpt);
+	if (ret) {
+		dev_err(dev, "Request irq failed\n");
+		pci_free_irq_vectors(cpt->pdev);
+		return ret;
+	}
+	/* Enable mailbox interrupt */
+	otx_cpt_enable_mbox_interrupts(cpt);
+	return 0;
+}
+
+static void otx_cpt_unregister_interrupts(struct otx_cpt_device *cpt)
+{
+	u32 mbox_int_idx = OTX_CPT_PF_MBOX_INT;
+
+	otx_cpt_disable_mbox_interrupts(cpt);
+	free_irq(pci_irq_vector(cpt->pdev,
+				OTX_CPT_PF_INT_VEC_E_MBOXX(mbox_int_idx, 0)),
+				cpt);
+	pci_free_irq_vectors(cpt->pdev);
+}
+
+
+static int otx_cpt_sriov_configure(struct pci_dev *pdev, int numvfs)
+{
+	struct otx_cpt_device *cpt = pci_get_drvdata(pdev);
+	int ret = 0;
+
+	if (numvfs > cpt->max_vfs)
+		numvfs = cpt->max_vfs;
+
+	if (numvfs > 0) {
+		ret = otx_cpt_try_create_default_eng_grps(cpt->pdev,
+							  &cpt->eng_grps,
+							  cpt->pf_type);
+		if (ret)
+			return ret;
+
+		cpt->vfs_enabled = numvfs;
+		ret = pci_enable_sriov(pdev, numvfs);
+		if (ret) {
+			cpt->vfs_enabled = 0;
+			return ret;
+		}
+		otx_cpt_set_eng_grps_is_rdonly(&cpt->eng_grps, true);
+		try_module_get(THIS_MODULE);
+		ret = numvfs;
+	} else {
+		pci_disable_sriov(pdev);
+		otx_cpt_set_eng_grps_is_rdonly(&cpt->eng_grps, false);
+		module_put(THIS_MODULE);
+		cpt->vfs_enabled = 0;
+	}
+	dev_notice(&cpt->pdev->dev, "VFs enabled: %d\n", ret);
+
+	return ret;
+}
+
+static int otx_cpt_probe(struct pci_dev *pdev,
+			 const struct pci_device_id __always_unused *ent)
+{
+	struct device *dev = &pdev->dev;
+	struct otx_cpt_device *cpt;
+	int err;
+
+	cpt = devm_kzalloc(dev, sizeof(*cpt), GFP_KERNEL);
+	if (!cpt)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, cpt);
+	cpt->pdev = pdev;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device\n");
+		goto err_clear_drvdata;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(dev, "PCI request regions failed 0x%x\n", err);
+		goto err_disable_device;
+	}
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to get usable DMA configuration\n");
+		goto err_release_regions;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to get 48-bit DMA for consistent allocations\n");
+		goto err_release_regions;
+	}
+
+	/* MAP PF's configuration registers */
+	cpt->reg_base = pci_iomap(pdev, OTX_CPT_PF_PCI_CFG_BAR, 0);
+	if (!cpt->reg_base) {
+		dev_err(dev, "Cannot map config register space, aborting\n");
+		err = -ENOMEM;
+		goto err_release_regions;
+	}
+
+	/* CPT device HW initialization */
+	err = otx_cpt_device_init(cpt);
+	if (err)
+		goto err_unmap_region;
+
+	/* Register interrupts */
+	err = otx_cpt_register_interrupts(cpt);
+	if (err)
+		goto err_unmap_region;
+
+	/* Initialize engine groups */
+	err = otx_cpt_init_eng_grps(pdev, &cpt->eng_grps, cpt->pf_type);
+	if (err)
+		goto err_unregister_interrupts;
+
+	return 0;
+
+err_unregister_interrupts:
+	otx_cpt_unregister_interrupts(cpt);
+err_unmap_region:
+	pci_iounmap(pdev, cpt->reg_base);
+err_release_regions:
+	pci_release_regions(pdev);
+err_disable_device:
+	pci_disable_device(pdev);
+err_clear_drvdata:
+	pci_set_drvdata(pdev, NULL);
+
+	return err;
+}
+
+static void otx_cpt_remove(struct pci_dev *pdev)
+{
+	struct otx_cpt_device *cpt = pci_get_drvdata(pdev);
+
+	if (!cpt)
+		return;
+
+	/* Disable VFs */
+	pci_disable_sriov(pdev);
+	/* Cleanup engine groups */
+	otx_cpt_cleanup_eng_grps(pdev, &cpt->eng_grps);
+	/* Disable CPT PF interrupts */
+	otx_cpt_unregister_interrupts(cpt);
+	/* Disengage SE and AE cores from all groups */
+	otx_cpt_disable_all_cores(cpt);
+	pci_iounmap(pdev, cpt->reg_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+/* Supported devices */
+static const struct pci_device_id otx_cpt_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OTX_CPT_PCI_PF_DEVICE_ID) },
+	{ 0, }  /* end of table */
+};
+
+static struct pci_driver otx_cpt_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = otx_cpt_id_table,
+	.probe = otx_cpt_probe,
+	.remove = otx_cpt_remove,
+	.sriov_configure = otx_cpt_sriov_configure
+};
+
+module_pci_driver(otx_cpt_pci_driver);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell OcteonTX CPT Physical Function Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, otx_cpt_id_table);

drivers/crypto/marvell/octeontx/otx_cptpf_mbox.c

+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "otx_cpt_common.h"
+#include "otx_cptpf.h"
+
+static char *get_mbox_opcode_str(int msg_opcode)
+{
+	char *str = "Unknown";
+
+	switch (msg_opcode) {
+	case OTX_CPT_MSG_VF_UP:
+		str = "UP";
+		break;
+
+	case OTX_CPT_MSG_VF_DOWN:
+		str = "DOWN";
+		break;
+
+	case OTX_CPT_MSG_READY:
+		str = "READY";
+		break;
+
+	case OTX_CPT_MSG_QLEN:
+		str = "QLEN";
+		break;
+
+	case OTX_CPT_MSG_QBIND_GRP:
+		str = "QBIND_GRP";
+		break;
+
+	case OTX_CPT_MSG_VQ_PRIORITY:
+		str = "VQ_PRIORITY";
+		break;
+
+	case OTX_CPT_MSG_PF_TYPE:
+		str = "PF_TYPE";
+		break;
+
+	case OTX_CPT_MSG_ACK:
+		str = "ACK";
+		break;
+
+	case OTX_CPT_MSG_NACK:
+		str = "NACK";
+		break;
+	}
+
+	return str;
+}
+
+static void dump_mbox_msg(struct otx_cpt_mbox *mbox_msg, int vf_id)
+{
+	char raw_data_str[OTX_CPT_MAX_MBOX_DATA_STR_SIZE];
+
+	hex_dump_to_buffer(mbox_msg, sizeof(struct otx_cpt_mbox), 16, 8,
+			   raw_data_str, OTX_CPT_MAX_MBOX_DATA_STR_SIZE, false);
+	if (vf_id >= 0)
+		pr_debug("MBOX opcode %s received from VF%d raw_data %s",
+			 get_mbox_opcode_str(mbox_msg->msg), vf_id,
+			 raw_data_str);
+	else
+		pr_debug("MBOX opcode %s received from PF raw_data %s",
+			 get_mbox_opcode_str(mbox_msg->msg), raw_data_str);
+}
+
+static void otx_cpt_send_msg_to_vf(struct otx_cpt_device *cpt, int vf,
+				   struct otx_cpt_mbox *mbx)
+{
+	/* Writing mbox(0) causes interrupt */
+	writeq(mbx->data, cpt->reg_base + OTX_CPT_PF_VFX_MBOXX(vf, 1));
+	writeq(mbx->msg, cpt->reg_base + OTX_CPT_PF_VFX_MBOXX(vf, 0));
+}
+
+/*
+ * ACKs VF's mailbox message
+ * @vf: VF to which ACK to be sent
+ */
+static void otx_cpt_mbox_send_ack(struct otx_cpt_device *cpt, int vf,
+			      struct otx_cpt_mbox *mbx)
+{
+	mbx->data = 0ull;
+	mbx->msg = OTX_CPT_MSG_ACK;
+	otx_cpt_send_msg_to_vf(cpt, vf, mbx);
+}
+
+/* NACKs VF's mailbox message that PF is not able to complete the action */
+static void otx_cptpf_mbox_send_nack(struct otx_cpt_device *cpt, int vf,
+				     struct otx_cpt_mbox *mbx)
+{
+	mbx->data = 0ull;
+	mbx->msg = OTX_CPT_MSG_NACK;
+	otx_cpt_send_msg_to_vf(cpt, vf, mbx);
+}
+
+static void otx_cpt_clear_mbox_intr(struct otx_cpt_device *cpt, u32 vf)
+{
+	/* W1C for the VF */
+	writeq(1ull << vf, cpt->reg_base + OTX_CPT_PF_MBOX_INTX(0));
+}
+
+/*
+ * Configure QLEN/Chunk sizes for VF
+ */
+static void otx_cpt_cfg_qlen_for_vf(struct otx_cpt_device *cpt, int vf,
+				    u32 size)
+{
+	union otx_cptx_pf_qx_ctl pf_qx_ctl;
+
+	pf_qx_ctl.u = readq(cpt->reg_base + OTX_CPT_PF_QX_CTL(vf));
+	pf_qx_ctl.s.size = size;
+	pf_qx_ctl.s.cont_err = true;
+	writeq(pf_qx_ctl.u, cpt->reg_base + OTX_CPT_PF_QX_CTL(vf));
+}
+
+/*
+ * Configure VQ priority
+ */
+static void otx_cpt_cfg_vq_priority(struct otx_cpt_device *cpt, int vf, u32 pri)
+{
+	union otx_cptx_pf_qx_ctl pf_qx_ctl;
+
+	pf_qx_ctl.u = readq(cpt->reg_base + OTX_CPT_PF_QX_CTL(vf));
+	pf_qx_ctl.s.pri = pri;
+	writeq(pf_qx_ctl.u, cpt->reg_base + OTX_CPT_PF_QX_CTL(vf));
+}
+
+static int otx_cpt_bind_vq_to_grp(struct otx_cpt_device *cpt, u8 q, u8 grp)
+{
+	struct device *dev = &cpt->pdev->dev;
+	struct otx_cpt_eng_grp_info *eng_grp;
+	union otx_cptx_pf_qx_ctl pf_qx_ctl;
+	struct otx_cpt_ucode *ucode;
+
+	if (q >= cpt->max_vfs) {
+		dev_err(dev, "Requested queue %d is > than maximum avail %d",
+			q, cpt->max_vfs);
+		return -EINVAL;
+	}
+
+	if (grp >= OTX_CPT_MAX_ENGINE_GROUPS) {
+		dev_err(dev, "Requested group %d is > than maximum avail %d",
+			grp, OTX_CPT_MAX_ENGINE_GROUPS);
+		return -EINVAL;
+	}
+
+	eng_grp = &cpt->eng_grps.grp[grp];
+	if (!eng_grp->is_enabled) {
+		dev_err(dev, "Requested engine group %d is disabled", grp);
+		return -EINVAL;
+	}
+
+	pf_qx_ctl.u = readq(cpt->reg_base + OTX_CPT_PF_QX_CTL(q));
+	pf_qx_ctl.s.grp = grp;
+	writeq(pf_qx_ctl.u, cpt->reg_base + OTX_CPT_PF_QX_CTL(q));
+
+	if (eng_grp->mirror.is_ena)
+		ucode = &eng_grp->g->grp[eng_grp->mirror.idx].ucode[0];
+	else
+		ucode = &eng_grp->ucode[0];
+
+	if (otx_cpt_uc_supports_eng_type(ucode, OTX_CPT_SE_TYPES))
+		return OTX_CPT_SE_TYPES;
+	else if (otx_cpt_uc_supports_eng_type(ucode, OTX_CPT_AE_TYPES))
+		return OTX_CPT_AE_TYPES;
+	else
+		return BAD_OTX_CPTVF_TYPE;
+}
+
+/* Interrupt handler to handle mailbox messages from VFs */
+static void otx_cpt_handle_mbox_intr(struct otx_cpt_device *cpt, int vf)
+{
+	int vftype = 0;
+	struct otx_cpt_mbox mbx = {};
+	struct device *dev = &cpt->pdev->dev;
+	/*
+	 * MBOX[0] contains msg
+	 * MBOX[1] contains data
+	 */
+	mbx.msg  = readq(cpt->reg_base + OTX_CPT_PF_VFX_MBOXX(vf, 0));
+	mbx.data = readq(cpt->reg_base + OTX_CPT_PF_VFX_MBOXX(vf, 1));
+
+	dump_mbox_msg(&mbx, vf);
+
+	switch (mbx.msg) {
+	case OTX_CPT_MSG_VF_UP:
+		mbx.msg  = OTX_CPT_MSG_VF_UP;
+		mbx.data = cpt->vfs_enabled;
+		otx_cpt_send_msg_to_vf(cpt, vf, &mbx);
+		break;
+	case OTX_CPT_MSG_READY:
+		mbx.msg  = OTX_CPT_MSG_READY;
+		mbx.data = vf;
+		otx_cpt_send_msg_to_vf(cpt, vf, &mbx);
+		break;
+	case OTX_CPT_MSG_VF_DOWN:
+		/* First msg in VF teardown sequence */
+		otx_cpt_mbox_send_ack(cpt, vf, &mbx);
+		break;
+	case OTX_CPT_MSG_QLEN:
+		otx_cpt_cfg_qlen_for_vf(cpt, vf, mbx.data);
+		otx_cpt_mbox_send_ack(cpt, vf, &mbx);
+		break;
+	case OTX_CPT_MSG_QBIND_GRP:
+		vftype = otx_cpt_bind_vq_to_grp(cpt, vf, (u8)mbx.data);
+		if ((vftype != OTX_CPT_AE_TYPES) &&
+		    (vftype != OTX_CPT_SE_TYPES)) {
+			dev_err(dev, "VF%d binding to eng group %llu failed",
+				vf, mbx.data);
+			otx_cptpf_mbox_send_nack(cpt, vf, &mbx);
+		} else {
+			mbx.msg = OTX_CPT_MSG_QBIND_GRP;
+			mbx.data = vftype;
+			otx_cpt_send_msg_to_vf(cpt, vf, &mbx);
+		}
+		break;
+	case OTX_CPT_MSG_PF_TYPE:
+		mbx.msg = OTX_CPT_MSG_PF_TYPE;
+		mbx.data = cpt->pf_type;
+		otx_cpt_send_msg_to_vf(cpt, vf, &mbx);
+		break;
+	case OTX_CPT_MSG_VQ_PRIORITY:
+		otx_cpt_cfg_vq_priority(cpt, vf, mbx.data);
+		otx_cpt_mbox_send_ack(cpt, vf, &mbx);
+		break;
+	default:
+		dev_err(&cpt->pdev->dev, "Invalid msg from VF%d, msg 0x%llx\n",
+			vf, mbx.msg);
+		break;
+	}
+}
+
+void otx_cpt_mbox_intr_handler (struct otx_cpt_device *cpt, int mbx)
+{
+	u64 intr;
+	u8  vf;
+
+	intr = readq(cpt->reg_base + OTX_CPT_PF_MBOX_INTX(0));
+	pr_debug("PF interrupt mbox%d mask 0x%llx\n", mbx, intr);
+	for (vf = 0; vf < cpt->max_vfs; vf++) {
+		if (intr & (1ULL << vf)) {
+			otx_cpt_handle_mbox_intr(cpt, vf);
+			otx_cpt_clear_mbox_intr(cpt, vf);
+		}
+	}
+}

drivers/crypto/marvell/octeontx/otx_cptpf_ucode.h

+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTX CPT driver
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OTX_CPTPF_UCODE_H
+#define __OTX_CPTPF_UCODE_H
+
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include "otx_cpt_hw_types.h"
+
+/* CPT ucode name maximum length */
+#define OTX_CPT_UCODE_NAME_LENGTH	64
+/*
+ * On OcteonTX 83xx platform, only one type of engines is allowed to be
+ * attached to an engine group.
+ */
+#define OTX_CPT_MAX_ETYPES_PER_GRP	1
+
+/* Default tar archive file names */
+#define OTX_CPT_UCODE_TAR_FILE_NAME	"cpt8x-mc.tar"
+
+/* CPT ucode alignment */
+#define OTX_CPT_UCODE_ALIGNMENT		128
+
+/* CPT ucode signature size */
+#define OTX_CPT_UCODE_SIGN_LEN		256
+
+/* Microcode version string length */
+#define OTX_CPT_UCODE_VER_STR_SZ	44
+
+/* Maximum number of supported engines/cores on OcteonTX 83XX platform */
+#define OTX_CPT_MAX_ENGINES		64
+
+#define OTX_CPT_ENGS_BITMASK_LEN	(OTX_CPT_MAX_ENGINES/(BITS_PER_BYTE * \
+					 sizeof(unsigned long)))
+
+/* Microcode types */
+enum otx_cpt_ucode_type {
+	OTX_CPT_AE_UC_TYPE =	1,  /* AE-MAIN */
+	OTX_CPT_SE_UC_TYPE1 =	20, /* SE-MAIN - combination of 21 and 22 */
+	OTX_CPT_SE_UC_TYPE2 =	21, /* Fast Path IPSec + AirCrypto */
+	OTX_CPT_SE_UC_TYPE3 =	22, /*
+				     * Hash + HMAC + FlexiCrypto + RNG + Full
+				     * Feature IPSec + AirCrypto + Kasumi
+				     */
+};
+
+struct otx_cpt_bitmap {
+	unsigned long bits[OTX_CPT_ENGS_BITMASK_LEN];
+	int size;
+};
+
+struct otx_cpt_engines {
+	int type;
+	int count;
+};
+
+/* Microcode version number */
+struct otx_cpt_ucode_ver_num {
+	u8 nn;
+	u8 xx;
+	u8 yy;
+	u8 zz;
+};
+
+struct otx_cpt_ucode_hdr {
+	struct otx_cpt_ucode_ver_num ver_num;
+	u8 ver_str[OTX_CPT_UCODE_VER_STR_SZ];
+	u32 code_length;
+	u32 padding[3];
+};
+
+struct otx_cpt_ucode {
+	u8 ver_str[OTX_CPT_UCODE_VER_STR_SZ];/*
+					      * ucode version in readable format
+					      */
+	struct otx_cpt_ucode_ver_num ver_num;/* ucode version number */
+	char filename[OTX_CPT_UCODE_NAME_LENGTH];	 /* ucode filename */
+	dma_addr_t dma;		/* phys address of ucode image */
+	dma_addr_t align_dma;	/* aligned phys address of ucode image */
+	void *va;		/* virt address of ucode image */
+	void *align_va;		/* aligned virt address of ucode image */
+	u32 size;		/* ucode image size */
+	int type;		/* ucode image type SE or AE */
+};
+
+struct tar_ucode_info_t {
+	struct list_head list;
+	struct otx_cpt_ucode ucode;/* microcode information */
+	const u8 *ucode_ptr;	/* pointer to microcode in tar archive */
+};
+
+/* Maximum and current number of engines available for all engine groups */
+struct otx_cpt_engs_available {
+	int max_se_cnt;
+	int max_ae_cnt;
+	int se_cnt;
+	int ae_cnt;
+};
+
+/* Engines reserved to an engine group */
+struct otx_cpt_engs_rsvd {
+	int type;	/* engine type */
+	int count;	/* number of engines attached */
+	int offset;     /* constant offset of engine type in the bitmap */
+	unsigned long *bmap;		/* attached engines bitmap */
+	struct otx_cpt_ucode *ucode;	/* ucode used by these engines */
+};
+
+struct otx_cpt_mirror_info {
+	int is_ena;	/*
+			 * is mirroring enabled, it is set only for engine
+			 * group which mirrors another engine group
+			 */
+	int idx;	/*
+			 * index of engine group which is mirrored by this
+			 * group, set only for engine group which mirrors
+			 * another group
+			 */
+	int ref_count;	/*
+			 * number of times this engine group is mirrored by
+			 * other groups, this is set only for engine group
+			 * which is mirrored by other group(s)
+			 */
+};
+
+struct otx_cpt_eng_grp_info {
+	struct otx_cpt_eng_grps *g; /* pointer to engine_groups structure */
+	struct device_attribute info_attr; /* group info entry attr */
+	/* engines attached */
+	struct otx_cpt_engs_rsvd engs[OTX_CPT_MAX_ETYPES_PER_GRP];
+	/* Microcode information */
+	struct otx_cpt_ucode ucode[OTX_CPT_MAX_ETYPES_PER_GRP];
+	/* sysfs info entry name */
+	char sysfs_info_name[OTX_CPT_UCODE_NAME_LENGTH];
+	/* engine group mirroring information */
+	struct otx_cpt_mirror_info mirror;
+	int idx;	 /* engine group index */
+	bool is_enabled; /*
+			  * is engine group enabled, engine group is enabled
+			  * when it has engines attached and ucode loaded
+			  */
+};
+
+struct otx_cpt_eng_grps {
+	struct otx_cpt_eng_grp_info grp[OTX_CPT_MAX_ENGINE_GROUPS];
+	struct device_attribute ucode_load_attr;/* ucode load attr */
+	struct otx_cpt_engs_available avail;
+	struct mutex lock;
+	void *obj;
+	int engs_num;			/* total number of engines supported */
+	int eng_types_supported;	/* engine types supported SE, AE */
+	u8 eng_ref_cnt[OTX_CPT_MAX_ENGINES];/* engines reference count */
+	bool is_ucode_load_created;	/* is ucode_load sysfs entry created */
+	bool is_first_try; /* is this first try to create kcrypto engine grp */
+	bool is_rdonly;	/* do engine groups configuration can be modified */
+};
+
+int otx_cpt_init_eng_grps(struct pci_dev *pdev,
+			  struct otx_cpt_eng_grps *eng_grps, int pf_type);
+void otx_cpt_cleanup_eng_grps(struct pci_dev *pdev,
+			      struct otx_cpt_eng_grps *eng_grps);
+int otx_cpt_try_create_default_eng_grps(struct pci_dev *pdev,
+					struct otx_cpt_eng_grps *eng_grps,
+					int pf_type);
+void otx_cpt_set_eng_grps_is_rdonly(struct otx_cpt_eng_grps *eng_grps,
+				    bool is_rdonly);
+int otx_cpt_uc_supports_eng_type(struct otx_cpt_ucode *ucode, int eng_type);
+int otx_cpt_eng_grp_has_eng_type(struct otx_cpt_eng_grp_info *eng_grp,
+				 int eng_type);
+
+#endif /* __OTX_CPTPF_UCODE_H */