提交 d8e5aec8 编写于 作者: J Jiri Slaby 提交者: Jiri Kosina

HID: elo: add quirks for broken firmware

One firmare version in the devices the driver takes care of is
completely broken and needs periodic pokes from our side. We
implemented this as a periodic delayed queue. The idea of the pokes
was taken from the suse enterprise kernel, in particular from Libor's
"Elo touchscreen firmware M workaround".

I am quoting him here:
  This patch adds periodic polling of the Elo USB touchscreens. Needed
  as a workaround for devices with M-level firmware, otherwise these
  devices are known to misbehave (as reported by Elo developers).
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Tested-by: NPetr Ostadal <postadal@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Egbert Eich <eich@suse.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 d23efc19
......@@ -11,9 +11,32 @@
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include "hid-ids.h"
#define ELO_PERIODIC_READ_INTERVAL HZ
#define ELO_SMARTSET_CMD_TIMEOUT 2000 /* msec */
/* Elo SmartSet commands */
#define ELO_FLUSH_SMARTSET_RESPONSES 0x02 /* Flush all pending smartset responses */
#define ELO_SEND_SMARTSET_COMMAND 0x05 /* Send a smartset command */
#define ELO_GET_SMARTSET_RESPONSE 0x06 /* Get a smartset response */
#define ELO_DIAG 0x64 /* Diagnostics command */
#define ELO_SMARTSET_PACKET_SIZE 8
struct elo_priv {
struct usb_device *usbdev;
struct delayed_work work;
unsigned char buffer[ELO_SMARTSET_PACKET_SIZE];
};
static struct workqueue_struct *wq;
static bool use_fw_quirk = true;
module_param(use_fw_quirk, bool, S_IRUGO);
MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)");
static void elo_input_configured(struct hid_device *hdev,
struct hid_input *hidinput)
{
......@@ -73,10 +96,108 @@ static int elo_raw_event(struct hid_device *hdev, struct hid_report *report,
return 0;
}
static int elo_smartset_send_get(struct usb_device *dev, u8 command,
void *data)
{
unsigned int pipe;
u8 dir;
if (command == ELO_SEND_SMARTSET_COMMAND) {
pipe = usb_sndctrlpipe(dev, 0);
dir = USB_DIR_OUT;
} else if (command == ELO_GET_SMARTSET_RESPONSE) {
pipe = usb_rcvctrlpipe(dev, 0);
dir = USB_DIR_IN;
} else
return -EINVAL;
return usb_control_msg(dev, pipe, command,
dir | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, data, ELO_SMARTSET_PACKET_SIZE,
ELO_SMARTSET_CMD_TIMEOUT);
}
static int elo_flush_smartset_responses(struct usb_device *dev)
{
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
ELO_FLUSH_SMARTSET_RESPONSES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static void elo_work(struct work_struct *work)
{
struct elo_priv *priv = container_of(work, struct elo_priv, work.work);
struct usb_device *dev = priv->usbdev;
unsigned char *buffer = priv->buffer;
int ret;
ret = elo_flush_smartset_responses(dev);
if (ret < 0) {
dev_err(&dev->dev, "initial FLUSH_SMARTSET_RESPONSES failed, error %d\n",
ret);
goto fail;
}
/* send Diagnostics command */
*buffer = ELO_DIAG;
ret = elo_smartset_send_get(dev, ELO_SEND_SMARTSET_COMMAND, buffer);
if (ret < 0) {
dev_err(&dev->dev, "send Diagnostics Command failed, error %d\n",
ret);
goto fail;
}
/* get the result */
ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, buffer);
if (ret < 0) {
dev_err(&dev->dev, "get Diagnostics Command response failed, error %d\n",
ret);
goto fail;
}
/* read the ack */
if (*buffer != 'A') {
ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE,
buffer);
if (ret < 0) {
dev_err(&dev->dev, "get acknowledge response failed, error %d\n",
ret);
goto fail;
}
}
fail:
ret = elo_flush_smartset_responses(dev);
if (ret < 0)
dev_err(&dev->dev, "final FLUSH_SMARTSET_RESPONSES failed, error %d\n",
ret);
queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
}
/*
* Not all Elo devices need the periodic HID descriptor reads.
* Only firmware version M needs this.
*/
static bool elo_broken_firmware(struct usb_device *dev)
{
return use_fw_quirk && le16_to_cpu(dev->descriptor.bcdDevice) == 0x10d;
}
static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct elo_priv *priv;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
INIT_DELAYED_WORK(&priv->work, elo_work);
priv->usbdev = interface_to_usbdev(to_usb_interface(hdev->dev.parent));
hid_set_drvdata(hdev, priv);
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
......@@ -89,14 +210,24 @@ static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto err_free;
}
if (elo_broken_firmware(priv->usbdev)) {
hid_info(hdev, "broken firmware found, installing workaround\n");
queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
}
return 0;
err_free:
kfree(priv);
return ret;
}
static void elo_remove(struct hid_device *hdev)
{
struct elo_priv *priv = hid_get_drvdata(hdev);
hid_hw_stop(hdev);
flush_workqueue(wq);
kfree(priv);
}
static const struct hid_device_id elo_devices[] = {
......@@ -117,13 +248,24 @@ static struct hid_driver elo_driver = {
static int __init elo_driver_init(void)
{
return hid_register_driver(&elo_driver);
int ret;
wq = create_singlethread_workqueue("elousb");
if (!wq)
return -ENOMEM;
ret = hid_register_driver(&elo_driver);
if (ret)
destroy_workqueue(wq);
return ret;
}
module_init(elo_driver_init);
static void __exit elo_driver_exit(void)
{
hid_unregister_driver(&elo_driver);
destroy_workqueue(wq);
}
module_exit(elo_driver_exit);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册