Merge tag 'renesas-boards3-for-v3.15' of...

Merge tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Third Round of Renesas ARM Based SoC Boards Updates for v3.15" from
Simon Horman:

* r7s72100 SoC (RZ/A1H) based Genmai board
  - Set proper DMA masks for Ether device

* r8a7791 (R-Car M2) based Koelsch board
  - Remove Koelsch DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add DU device to koelsch-reference
  - Refactor clock lookup hack in koelsch-reference
  - Add SDHI devices

* r8a7790 (R-Car H2) based Lager board
  - Remove Lager DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add internal USB PCI support
  - Add QSPI pinmux
  - Sdd SDHI0/2 support

* emev2 (Emma Mobile EV2) based kzm9d board
  - Remove KZM9D board code

* r8a7778 (R-Car M1) based bock-w board
  - Set proper DMA masks for Ether device

* r8a7740 (R-Mobile A1) based Armadillo 800 EVA board
  - Set proper DMA masks for Ether device

* tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove Lager DT reference legacy clock bits
  ARM: shmobile: Remove Koelsch DT reference legacy clock bits
  ARM: shmobile: Remove KZM9D board code
  ARM: shmobile: Genmai: set proper DMA masks for Ether device
  ARM: shmobile: Koelsch: set proper DMA masks for Ether device
  ARM: shmobile: Lager: set proper DMA masks for Ether device
  ARM: shmobile: BOCK-W: set proper DMA masks for Ether device
  ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device
  ARM: shmobile: koelsch-reference: Add DU device
  ARM: shmobile: koelsch-reference: Refactor clock lookup hack
  ARM: shmobile: lager-reference: Add DU device
  ARM: shmobile: lager-reference: Refactor clock lookup hack
  ARM: shmobile: lager: Add internal USB PCI support
  ARM: shmobile: lager legacy: Add QSPI pinmux
  ARM: shmobile: lager: add SDHI0/2 support
  ARM: shmobile: Add SDHI devices for legacy Koelsch
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-shmobile/Kconfig

@@ -47,12 +47,6 @@ config MACH_KOELSCH
 	depends on ARCH_R8A7791
 	select MICREL_PHY if SH_ETH
 
-config MACH_KZM9D
-	bool "KZM9D board"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SMSC911X
-
 config MACH_LAGER
 	bool "Lager board"
 	depends on ARCH_R8A7790

arch/arm/mach-shmobile/Makefile

@@ -58,7 +58,6 @@ obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
-obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -383,6 +383,8 @@ static struct platform_device sh_eth_device = {
 	.id = -1,
 	.dev = {
 		.platform_data = &sh_eth_platdata,
+		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.resource = sh_eth_resources,
 	.num_resources = ARRAY_SIZE(sh_eth_resources),

arch/arm/mach-shmobile/board-bockw.c

 /*
  * Bock-W board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
+ * Copyright (C) 2013-2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -235,6 +235,17 @@ static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.no_ether_link	= 1,
 };
 
+static struct platform_device_info ether_info __initdata = {
+	.parent		= &platform_bus,
+	.name		= "r8a777x-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_platform_data,
+	.size_data	= sizeof(ether_platform_data),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* I2C */
 static struct i2c_board_info i2c0_devices[] = {
 	{
@@ -592,11 +603,7 @@ static void __init bockw_init(void)
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_platform_data,
-					  sizeof(ether_platform_data));
+	platform_device_register_full(&ether_info);
 
 	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */

arch/arm/mach-shmobile/board-genmai.c

 /*
  * Genmai board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -43,6 +44,17 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_iid(359)),
 };
 
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r7s72100-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* RSPI */
 #define RSPI_RESOURCE(idx, baseaddr, irq)				\
 static const struct resource rspi##idx##_resources[] __initconst = {	\
@@ -82,10 +94,7 @@ static void __init genmai_add_standard_devices(void)
 	r7s72100_clock_init();
 	r7s72100_add_dt_devices();
 
-	platform_device_register_resndata(&platform_bus, "r7s72100-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 
 	r7s72100_register_rspi(0);
 	r7s72100_register_rspi(1);

arch/arm/mach-shmobile/board-koelsch-reference.c

@@ -21,46 +21,114 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data koelsch_du_pdata = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x40000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7791",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &koelsch_du_pdata,
+		.size_data = sizeof(koelsch_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 static void __init koelsch_add_standard_devices(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
+	 * This is a really crude hack to provide clkdev support to the CMT and
+	 * DU devices until they get moved to DT.
 	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
-		"scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
-		"scifa4", "scifa5",
+	static const struct clk_name {
+		const char *clk;
+		const char *con_id;
+		const char *dev_id;
+	} clk_names[] = {
+		{ "cmt0", NULL, "sh_cmt.0" },
+		{ "scifa0", NULL, "sh-sci.0" },
+		{ "scifa1", NULL, "sh-sci.1" },
+		{ "scifb0", NULL, "sh-sci.2" },
+		{ "scifb1", NULL, "sh-sci.3" },
+		{ "scifb2", NULL, "sh-sci.4" },
+		{ "scifa2", NULL, "sh-sci.5" },
+		{ "scif0", NULL, "sh-sci.6" },
+		{ "scif1", NULL, "sh-sci.7" },
+		{ "scif2", NULL, "sh-sci.8" },
+		{ "scif3", NULL, "sh-sci.9" },
+		{ "scif4", NULL, "sh-sci.10" },
+		{ "scif5", NULL, "sh-sci.11" },
+		{ "scifa3", NULL, "sh-sci.12" },
+		{ "scifa4", NULL, "sh-sci.13" },
+		{ "scifa5", NULL, "sh-sci.14" },
+		{ "du0", "du.0", "rcar-du-r8a7791" },
+		{ "du1", "du.1", "rcar-du-r8a7791" },
+		{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
 	};
 	struct clk *clk;
 	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
+	for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
+		clk = clk_get(NULL, clk_names[i].clk);
 		if (!IS_ERR(clk)) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+			clk_register_clkdev(clk, clk_names[i].con_id,
+					    clk_names[i].dev_id);
 			clk_put(clk);
 		}
 	}
 
-	clk = clk_get(NULL, "cmt0");
-	if (!IS_ERR(clk)) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7791_clock_init();
-#endif
 	r8a7791_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	koelsch_add_du_device();
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {

arch/arm/mach-shmobile/board-koelsch.c

@@ -2,8 +2,9 @@
  * Koelsch board support
  *
  * Copyright (C) 2013  Renesas Electronics Corporation
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,6 +27,9 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/phy.h>
@@ -33,6 +37,10 @@
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/rspi.h>
@@ -109,6 +117,17 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7791-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* LEDS */
 static struct gpio_led koelsch_leds[] = {
 	{
@@ -251,6 +270,103 @@ static void __init koelsch_add_i2c(unsigned idx)
 					i2c_resources + res_idx, 2);
 }
 
+#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)				\
+static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vcc_sdhi##idx##_init_data = {		\
+	.constraints = {						\
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vcc_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
+	.supply_name	= "SDHI" #idx "Vcc",				\
+	.microvolts	= 3300000,					\
+	.gpio		= vdd_pin,					\
+	.enable_high	= 1,						\
+	.init_data	= &vcc_sdhi##idx##_init_data,			\
+};									\
+									\
+static struct regulator_consumer_supply vccq_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vccq_sdhi##idx##_init_data = {	\
+	.constraints = {						\
+		.input_uV	= 3300000,				\
+		.min_uV		= 1800000,				\
+		.max_uV		= 3300000,				\
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |		\
+				  REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vccq_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static struct gpio vccq_sdhi##idx##_gpio =				\
+	{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx };		\
+									\
+static struct gpio_regulator_state vccq_sdhi##idx##_states[] = {	\
+	{ .value = 1800000, .gpios = 0 },				\
+	{ .value = 3300000, .gpios = 1 },				\
+};									\
+									\
+static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
+	.supply_name	= "vqmmc",					\
+	.gpios		= &vccq_sdhi##idx##_gpio,			\
+	.nr_gpios	= 1,						\
+	.states		= vccq_sdhi##idx##_states,			\
+	.nr_states	= ARRAY_SIZE(vccq_sdhi##idx##_states),		\
+	.type		= REGULATOR_VOLTAGE,				\
+	.init_data	= &vccq_sdhi##idx##_init_data,			\
+};
+
+SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
+SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
+SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee160000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(168)),
+};
+
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
 	/* DU */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -288,6 +404,31 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
 	/* I2C4 */
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
 				  "i2c4_c", "i2c4"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_wp", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_ctrl", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_cd", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_wp", "sdhi1"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_cd", "sdhi2"),
 };
 
 static void __init koelsch_add_standard_devices(void)
@@ -297,10 +438,7 @@ static void __init koelsch_add_standard_devices(void)
 				  ARRAY_SIZE(koelsch_pinctrl_map));
 	r8a7791_pinmux_init();
 	r8a7791_add_standard_devices();
-	platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 	platform_device_register_data(&platform_bus, "leds-gpio", -1,
 				      &koelsch_leds_pdata,
 				      sizeof(koelsch_leds_pdata));
@@ -321,6 +459,32 @@ static void __init koelsch_add_standard_devices(void)
 	koelsch_add_i2c(2);
 	koelsch_add_i2c(4);
 	koelsch_add_i2c(5);
+
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 0,
+				      &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 1,
+				      &vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 0,
+				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 1,
+				      &vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 2,
+				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+					  &sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
+
 }
 
 /*

arch/arm/mach-shmobile/board-kzm9d-reference.c

-/*
- * kzm9d board support - Reference DT implementation
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <mach/emev2.h>
-#include <mach/common.h>
-#include <asm/mach/arch.h>
-
-static void __init kzm9d_add_standard_devices(void)
-{
-	of_clk_init(NULL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
-	"renesas,kzm9d",
-	"renesas,kzm9d-reference",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
-	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
-	.init_machine	= kzm9d_add_standard_devices,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= kzm9d_boards_compat_dt,
-MACHINE_END

arch/arm/mach-shmobile/board-lager-reference.c

@@ -20,47 +20,116 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 static void __init lager_add_standard_devices(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
+	 * This is a really crude hack to provide clkdev support to platform
+	 * devices until they get moved to DT.
 	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1",
-		"scifb2", "scifa2", "scif0", "scif1",
-		"hscif0", "hscif1",
+	static const struct clk_name {
+		const char *clk;
+		const char *con_id;
+		const char *dev_id;
+	} clk_names[] = {
+		{ "cmt0", NULL, "sh_cmt.0" },
+		{ "scifa0", NULL, "sh-sci.0" },
+		{ "scifa1", NULL, "sh-sci.1" },
+		{ "scifb0", NULL, "sh-sci.2" },
+		{ "scifb1", NULL, "sh-sci.3" },
+		{ "scifb2", NULL, "sh-sci.4" },
+		{ "scifa2", NULL, "sh-sci.5" },
+		{ "scif0", NULL, "sh-sci.6" },
+		{ "scif1", NULL, "sh-sci.7" },
+		{ "hscif0", NULL, "sh-sci.8" },
+		{ "hscif1", NULL, "sh-sci.9" },
+		{ "du0", "du.0", "rcar-du-r8a7790" },
+		{ "du1", "du.1", "rcar-du-r8a7790" },
+		{ "du2", "du.2", "rcar-du-r8a7790" },
+		{ "lvds0", "lvds.0", "rcar-du-r8a7790" },
+		{ "lvds1", "lvds.1", "rcar-du-r8a7790" },
 	};
 	struct clk *clk;
 	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
+	for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
+		clk = clk_get(NULL, clk_names[i].clk);
 		if (!IS_ERR(clk)) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+			clk_register_clkdev(clk, clk_names[i].con_id,
+					    clk_names[i].dev_id);
 			clk_put(clk);
 		}
 	}
 
-	clk = clk_get(NULL, "cmt0");
-	if (!IS_ERR(clk)) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7790_clock_init();
-#endif
-
 	r8a7790_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	lager_add_du_device();
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/board-lager.c

 /*
  * Lager board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,8 +27,10 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/gpio-rcar.h>
@@ -68,6 +71,19 @@
  * # amixer set "LINEOUT Mixer DACL" on
  */
 
+/*
+ * SDHI0 (CN8)
+ *
+ * JP3:  pin1
+ * SW20: pin1
+
+ * GP5_24:	1:  VDD  3.3V (defult)
+ *		0:  VDD  0.0V
+ * GP5_29:	1:  VccQ 3.3V (defult)
+ *		0:  VccQ 1.8V
+ *
+ */
+
 /* DU */
 static struct rcar_du_encoder_data lager_du_encoders[] = {
 	{
@@ -260,6 +276,17 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7790-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
 static struct mtd_partition spi_flash_part[] = {
 	/* Reserved for user loader program, read-only */
@@ -595,6 +622,76 @@ static void __init lager_add_rsnd_device(void)
 	platform_device_register_full(&cardinfo);
 }
 
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* Internal PCI1 */
+static const struct resource pci1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0b0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0a0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(112)),
+};
+
+static const struct platform_device_info pci1_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 1,
+	.res		= pci1_resources,
+	.num_res	= ARRAY_SIZE(pci1_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb1_device(void)
+{
+	platform_device_register_full(&pci1_info);
+}
+
+/* Internal PCI2 */
+static const struct resource pci2_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0d0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0c0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(113)),
+};
+
+static const struct platform_device_info pci2_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 2,
+	.res		= pci2_resources,
+	.num_res	= ARRAY_SIZE(pci2_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb2_device(void)
+{
+	platform_device_register_full(&pci2_info);
+}
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* DU (CN10: ARGB0, CN13: LVDS) */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -606,12 +703,31 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* I2C2 */
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
 				  "i2c2", "i2c2"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_cd", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_cd", "sdhi2"),
 	/* SSI (CN17: sound) */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
 				  "ssi0129_ctrl", "ssi"),
@@ -654,6 +770,12 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* USB0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
 				  "usb0_ovc_vbus", "usb0"),
+	/* USB1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
+				  "usb1", "usb1"),
+	/* USB2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
+				  "usb2", "usb2"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -681,10 +803,7 @@ static void __init lager_add_standard_devices(void)
 					  mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
 					  &mmcif1_pdata, sizeof(mmcif1_pdata));
 
-	platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 
 	lager_add_du_device();
 
@@ -714,8 +833,17 @@ static void __init lager_add_standard_devices(void)
 					  &usbhs_phy_pdata,
 					  sizeof(usbhs_phy_pdata));
 	lager_register_usbhs();
+	lager_add_usb1_device();
+	lager_add_usb2_device();
 
 	lager_add_rsnd_device();
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
 }
 
 /*