提交 d894fc60 编写于 作者: A Alex Smith 提交者: Vinod Koul

dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller

This patch adds a driver for the DMA controller found in the Ingenic
JZ4780.

It currently does not implement any support for the programmable firmware
feature of the controller - this is not necessary for most uses. It also
does not take priority into account when allocating channels, it just
allocates the first available channel. This can be implemented later.
Signed-off-by: NAlex Smith <alex.smith@imgtec.com>
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
[Updated for dmaengine api changes, Add residue support, couple of minor fixes]
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 c8307106
......@@ -358,6 +358,16 @@ config DMA_JZ4740
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config DMA_JZ4780
tristate "JZ4780 DMA support"
depends on MACH_JZ4780
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
This selects support for the DMA controller in Ingenic JZ4780 SoCs.
If you have a board based on such a SoC and wish to use DMA for
devices which can use the DMA controller, say Y or M here.
config K3_DMA
tristate "Hisilicon K3 DMA support"
depends on ARCH_HI3xxx
......
......@@ -41,6 +41,7 @@ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
obj-$(CONFIG_TI_CPPI41) += cppi41.o
obj-$(CONFIG_K3_DMA) += k3dma.o
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
......
此差异已折叠。
#ifndef __DT_BINDINGS_DMA_JZ4780_DMA_H__
#define __DT_BINDINGS_DMA_JZ4780_DMA_H__
/*
* Request type numbers for the JZ4780 DMA controller (written to the DRTn
* register for the channel).
*/
#define JZ4780_DMA_I2S1_TX 0x4
#define JZ4780_DMA_I2S1_RX 0x5
#define JZ4780_DMA_I2S0_TX 0x6
#define JZ4780_DMA_I2S0_RX 0x7
#define JZ4780_DMA_AUTO 0x8
#define JZ4780_DMA_SADC_RX 0x9
#define JZ4780_DMA_UART4_TX 0xc
#define JZ4780_DMA_UART4_RX 0xd
#define JZ4780_DMA_UART3_TX 0xe
#define JZ4780_DMA_UART3_RX 0xf
#define JZ4780_DMA_UART2_TX 0x10
#define JZ4780_DMA_UART2_RX 0x11
#define JZ4780_DMA_UART1_TX 0x12
#define JZ4780_DMA_UART1_RX 0x13
#define JZ4780_DMA_UART0_TX 0x14
#define JZ4780_DMA_UART0_RX 0x15
#define JZ4780_DMA_SSI0_TX 0x16
#define JZ4780_DMA_SSI0_RX 0x17
#define JZ4780_DMA_SSI1_TX 0x18
#define JZ4780_DMA_SSI1_RX 0x19
#define JZ4780_DMA_MSC0_TX 0x1a
#define JZ4780_DMA_MSC0_RX 0x1b
#define JZ4780_DMA_MSC1_TX 0x1c
#define JZ4780_DMA_MSC1_RX 0x1d
#define JZ4780_DMA_MSC2_TX 0x1e
#define JZ4780_DMA_MSC2_RX 0x1f
#define JZ4780_DMA_PCM0_TX 0x20
#define JZ4780_DMA_PCM0_RX 0x21
#define JZ4780_DMA_SMB0_TX 0x24
#define JZ4780_DMA_SMB0_RX 0x25
#define JZ4780_DMA_SMB1_TX 0x26
#define JZ4780_DMA_SMB1_RX 0x27
#define JZ4780_DMA_SMB2_TX 0x28
#define JZ4780_DMA_SMB2_RX 0x29
#define JZ4780_DMA_SMB3_TX 0x2a
#define JZ4780_DMA_SMB3_RX 0x2b
#define JZ4780_DMA_SMB4_TX 0x2c
#define JZ4780_DMA_SMB4_RX 0x2d
#define JZ4780_DMA_DES_TX 0x2e
#define JZ4780_DMA_DES_RX 0x2f
#endif /* __DT_BINDINGS_DMA_JZ4780_DMA_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册